• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.105-109
• /
• 1996

The calculation of the total power required at the Continuous Extrusion Forming(CONFORM) has been performed by the theoretical analysis of three transformation regions(primary grip length and extrusion grip length, flashing). In this study, that was performed by five transformation regions(biting, upsetting, filling, extruding, flashing)and four transformation regions(biting, upsetting and filling, extruding, flashing) and then results of theoretical analyses were compared with experimental results. Results of analysis by four and five transformation regions than that of three transformation regions in the CONFORM showed in a good agreement with experimental results.

• 한국측량학회지
• /
• 제15권2호
• /
• pp.253-261
• /
• 1997

일반적으로 GPS 좌표변환은 3-10개의 변환요소에 의하여 3차원좌표로 이루어진다. 기존의 우리나라 삼각점의 성과는 수평위차결정과 수직위치의 측정이 각각 독립적(2D+1D)으로 관측 및 조정되었을 뿐만 아니라 이들에 대한 경중률도 정확하게 결정되어 있지 않다. 본 연구에서는 3차원(3D)방식의 결정방법과 수평위치와 연직위치의 분리(2D+1D)형태의 독립변환변수에 의한 변환방법을 서울의 강남지역과 용인의 구소삼각지역에 대하여 분석하였다. 연구결과 전통적인 3D변환방법보다는 2D+1D의 독립변환방식이 현재의 성과와 비교 분석한 결과 더 효율적이었다.

• 한국식품영양학회지
• /
• 제5권2호
• /
• pp.77-83
• /
• 1992

The optimum conditions and mechanisms for the plasmid-mediated genetic transformation of intact cells of Bacillus brevis Pl76-2, an extracellular protein producing bacterium by electroporation were investigated. It was found that pUB110 Plasmid DNA can be introduced into intact bacterial cells by electroporation. The frequency of transformation by this electroporation system depended upon the initial electric field strength, the capacity of the electric discharge capacitor, growth stage, number of successive pulses and composition of electroporation buffer. It was effective for transformation that cells were harvested, washed and resuspended with HSM [7M HEPES(PH 7.4), 272mM sucrose, 1 mM MgCl2] electroporation buffer when cell growth was attained to 1.2 at OD660. A maximum frequency of transformation of 2.40$\times$104 transformants per$\mu$g plasmid DNA was obtained by two succesive Pulses with an initial electric field strength of 12.5kV/cm and with a capacitance of 7.3uF.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.456-459
• /
• 2005

Continuous cooling transformation behaviors were studied fur low carbon HSLA steels containing three different level $(1\~3\;wt\%)$ of Ni addition. Thermo-mechanical processing (TMP) simulations to construct continuous cooling (CCT) diagram were conducted by using Gleeble system. As cooling rate increased, pearlite, granular bainite, acicular ferrite, bainitic ferrite and lath martensite were transformed from deformed austenite. Fully bainitic microstructure were developed at all cooling rate condition in high Ni containing steel due to hardenability increasing effects of Ni. Ni also influenced the transformation kinetics. At the slowest cooling rate of $0.3^{\circ}C/s$, transformation delayed with decreasing Ni contents because of the diffusion of substitutional alloy elements. However, cooling rate slightly increased to $1^{\circ}C/s$, transformation kinetics accelerated with decreasing Ni contents because nucleation of bainite was sluggish due to hardening of residual austenite.

• 한국초지조사료학회지
• /
• 제20권1호
• /
• pp.13-18
• /
• 2000

An efficient method for Agrobacterium-mediated transformation of forage crop alfalfa (Medicago sativa L.) was established using secondary somatic embryogenic calli. Agrobacterium tumefaciens strain EHAlOl and a binary vector pIG121-Hm which has selection markers for kanamycin and hygromycin have been shown to be an efticient materials for alfalfa transformation. The secondary somatic embryogenic calli originated from hypocotyl explants of alfalfa were efficient infection materials for Agrobacterium EHAlOl and normally germinated into plantlets. The introduced gene (GUS) was constitutively expressed in all tissues of transgenic alfalfa with different expression levels. These results indicate that the use of pIG121-Hm vector, Agrobacterium EHAlOl and improved culture system of callus facilitate the transformation of alfalfa. (Key words : Agrobacterium, Alfalfa, Gene transfer, Transformation)

• 열처리공학회지
• /
• 제6권4호
• /
• pp.213-222
• /
• 1993

This research was performed to investigate the transformation behavior and shape memory effect of Cu-13.5Al-4.5Ni(wt%) alloy with various aging temperature and time. The results obtained in this study are as follows: Transformation temperature was very increased when aging temperature is at $250^{\circ}C$. The variation of transformation temperature in first reverse transformation cycle and second was very significant, but there was little difference in case of 2nd and 3rd. Transformation temperature at various aging temperature was increased with increasing of aging temperature and time. Microvickers hardness was increased with increasing of aging temperature and time. It was found that ${\alpha}$ and ${\gamma}_2$ phase were created by aging of long time at high temperature.

• The Korean Journal of Ceramics
• /
• 제3권3호
• /
• pp.208-212
• /
• 1997

Shear-induced phase transformation behavior of chemically stabilized $\beta$-cristobalite was studied by the fiber push-out technique. To obtain the critical grain size for phase transformation, the hot-pressed polycrystalline $\beta$-cristobalite, which was used as the interphase between fiber and matrix, was annealed at $1300^{\circ}C$ for 10h. Two types of fibers, mullite and sapphire fiber, were used in this study. Debonding between mullite fiber and cristobalite interphase occurred at a critical load of 230 MPa. Static friction and fiber sliding were continuously followed by debonding. Shear-induced transformation induced cracks in the cristobalite interphase at the debonding stage. In the case of the sapphire fiber, the debonding occurred at a lower load of 180 MPa due to the residual stress in the interface caused by the difference in thermal expansion coefficients between the fiber and the cristobalite interphase. The load was insufficient for shear-induced phase transformation.

• 한국CDE학회논문집
• /
• 제12권5호
• /
• pp.354-365
• /
• 2007

We present novel methods to generate a sequence of shapes that represents the pattern of morphological development or transformation of Bezier curves. The presented methods utilize the intrinsic geometric structures of a Bezier curve that are derived from rib and fan decomposition (RFD). Morphological development based on RFD shows a characteristic pattern of structural growth of a Bezier curve, which is the direct consequence of development path defined by fans. Morphological transformation based RFD utilizes development patterns of source and target curves to mimic the theory of evolutionary developmental biology: although the source and target curves are quite different in shapes, we can easily find similarities in their younger shapes, which makes it easier to set up feature correspondences for blending them. We also show that further controls on base transformation for intensity of feature blending, and extrapolation can compensate the immaturity of blended curves. We demonstrate the experimental results where transformation patterns are smoother and have unique geometric style that cannot be generated using conventional methods based on multi-linear blending.

• 안보군사학연구
• /
• 통권4호
• /
• pp.381-418
• /
• 2006

In present, advanced countries in the world are seen concentring on Military Transformation to create new military capability as there is a shift in Warfare Paradigm. Rapid development of technology enables military system, operational concept and organization innovated. As a result, Revolution in Military Affairs(RMA) that dramatically increased warfighting capability is pursued. Especially, advanced information technology constructs system of systems with abilities of battle visualization, information sharing in battlefield, long-range strike capability that are interoperable and combined. Corresponding to this, engagement methods and organizations are being progressively developed. The purpose of this thesis is overview of newly developing Warfare Paradigm and analysis of tendency of Military Transformation that advanced countries are pursuing preparation to this. Above all, specific aspects and contents of the Warfare Paradigm which emerged by information age were summarized. Subsequently, Military Transformation which provides the basic concepts and principles to the advanced countries in the world for the creation of new military capability was discussed. In conclusion, the tendency of Military Transformation by U.S.A, Japan, China, and Russia surround the Korean peninsular as the major power in military was carefully observed.

• 수산해양기술연구
• /
• 제27권4호
• /
• pp.321-327
• /
• 1991

Experiments of quenching were made with cylindrical specimens of carbon steel S45C of diameters from 12 to 30mm were performed. The specimens were heated by electric furnace and quenched by immersion method. In order to analyze the temperature profile(cooling curves) of carbon steel including the latent heat of phase transformation, nonlinear heat conduction problem was calculated by the numerical method of inverse heat conduction problem using the apparent heat capacity method. The difference between the calculated and the experimented cooling curves was caused by the latent heat of phase transformation, and the effects of the latent heat were especially manifest at the cooling curves of center of specimens. The temperature and the quantity of the latent heat of phase transformation depend on the cooling speed at A sub(1) transformation point, and the region for cooling speed to become zero was caused by the latent heat of phase transformation.