• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.65-74
• /
• 1994

Various substructure synthesis methods, such as component mode synthesis, building block analysis and reduced impedance method, are studied for the determination of vibration characteristics of plate problems. Comparisons are made for each methods in terms of accuracy and computational efficiency. Following conclusions are made from the results of computer simulations and experiments. i) The computation time of component mode synthesis is much shorter than that of whole structure analysis. The natural frequencies of lower modes obtained from component mode synthesis are almost same as those obtained from whole structure analysis, but in higher modes the differences between those two methods are increases. ii) The transfer function obtained from building block analysis is same as that obtained from the finite element method. iii) Same transfer functions can be obtained by the reduced impedance method. The computation time of reduced impedance mathod is shorter that that of general finite element method, but for the solutions in broad frequency band it requires long calculation time.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.265-271
• /
• 2018

본 연구에서는 임피던스(impedance)를 이용하여 저비용으로 구조물의 결함을 탐지할 수 있는 기법을 연구한다. 임피던스 기법은 구조물 건전성 모니터링을 위한 국부적 결함탐지의 대표적인 기법으로써, 압전재료를 구조물의 표면에 부착하여 구조물의 전기-역학적 어드미턴스(electro-mechanical admittance) 신호를 모니터링 함으로써 결함을 추정하는 기법이다. 이 기법을 적용하기 위하여 일반적으로 고가의 임피던스 분석기(impedance analyser)가 사용되는데, 기술의 효과적인 보급을 위해서는 저비용의 기법을 개발할 필요가 있다. 본 연구에서는 임피던스 분석기를 대체하여, 일반적으로 실험실에서 사용되는 함수발생기(function generator)와 디지털 멀티미터(digital multimeter)만을 이용하여 전달 임피던스(transfer impedance)를 측정함으로써 구조물에 발생하는 결함을 탐지할 수 있는 기법을 연구한다. 즉, 건전상태와 손상상태에서 측정되는 전압의 진폭비를 이용한 손상지수를 비교함으로써 결함 유무를 판정할 수 있는 기법을 연구한다. 강재 시편에 대한 전달 임피던스 실험을 수행하였는데, 출력 전압의 진폭비를 이용한 손상지수를 비교함으로써 결함 유무를 합리적으로 판정할 수 있었다. 본 연구는 임피던스 기반 저비용 결함탐지기법을 위한 기초연구로써, 향후 결함의 위치 및 정도를 판정할 수 있는 연구가 보완된다면 구조물 건전성 모니터링에 효과적으로 활용될 수 있을 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.244-249
• /
• 2001

In this study, the ISO 10534-2 "Determination of sound absorption coefficient and impedance in impedance tubes - Part 2: Transfer function method" was introduced and discussed. In order to make it as Korean Industrial Standard, several main contents of ISO 10534-2 are reviewed. Some experimental results are reconsidered.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.49-56
• /
• 2011

Grounding system insures a reference potential point for electric devices and also provides a low impedance path for fault currents or transient currents in the earth. The ground impedance as function of frequency is necessary for determining its performance since fault currents could contain a wide range of frequencies. In this paper, the grounding resistance, grounding impedance and transient grounding impedance are measured by using 3-point fall-of-potential method in order to analyse grounding characteristics of the copper and concrete rod grounding electrodes. An equivalent transfer function model of the ground impedance and transient grounding impedance are identified from the measured values by using ARMA method and evaluated by comparing the conventional grounding impedance.

• 조명전기설비학회논문지
• /
• 제19권6호
• /
• pp.67-74
• /
• 2005

접지 시스템은 전기설비의 기준 전위점을 확보할 뿐만 아니라, 대지에 낮은 저항으로 고장 전류를 흐르게 한다. 고장전류는 넓은 범위의 주파수를 포함하기 때문에 접지의 성능을 평가하기 위해선 주파수에 대한 함수로 접지임피던스에 대한 특성의 분석이 필요하다. 본 논문에서는 상용화된 접지봉(매직봉)의 접지임피던스를 0[Hz]에서 100[kHz] 범위까지 측정하였고, 접지임피던스를 회로 모델과 전달함수 모델로 구하여 측정된 값과 비교 검토하였다.

• 조명전기설비학회논문지
• /
• 제19권6호
• /
• pp.46-51
• /
• 2005

접지 시스템은 전기설비의 기준 전위점을 확보할 뿐만 아니라 대지에 낮은 저항으로 고장 전류를 흐르게 한다. 주파수에 대한 함수로 접지임피던스는 고장전류가 넓은 범위의 주파수를 포함하기 때문에 접지 성능을 평가하는데 필요하다. 동봉은 배전계통에서 가장 많이 쓰이는 접지 전극이다. 본 논문에서는 동봉의 접지임피던스를 주파수 60[Hz]에서 100[kHz] 범위까지 측정하였고, 접지임피던스를 회로 모델과 전달함수 모델로 구하여 측정된 값과 비교 검토하였다.

• 한국소음진동공학회논문집
• /
• 제12권9호
• /
• pp.709-716
• /
• 2002

A practical method of predicting the sound absorption coefficient for multiple perforated-plate sound absorbing system was developed using transfer matrix method. The proposed method was validated by comparing the calculated absorption coefficients of a single layer perforated plate with the values measured by the two-microphone impedance tube method for various porosity and spacing of the perforated plate. The developed transfer matrix method was further applied to estimate the multiple layer perforated plates and it is shown that the estimated absorption coefficients agree well with the measured values.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.749-756
• /
• 2004

While designing shafting in reciprocating machines with internal combustion engines which derive generators, pumps, and vehicles, it is very important to calculate the additional stress of shafting by torsional vibration. In this paper, the transfer stiffness coefficient method which is based on the successive transfer of stiffness coefficient was applied to the calculation of the additional stress of shafting in reciprocating machine by torsional vibration. In order to confirm the effectiveness of the present method, a propulsion shafting with a diesel engine in a vessel was considered as the computational example of shafting in reciprocating machine. The results calculated by the present method were compared with those of the modal analysis method, the mechanical impedance method, and free vibration analysis.

• 대한의용생체공학회:의공학회지
• /
• 제34권3호
• /
• pp.141-147
• /
• 2013

Ultrasonic shears is currently in wide use as an energy device for minimal invasive surgery. There is an advantage of minimizing the carbonization behavior of the tissue due to the vibrational energy transfer system of the transducer by applying a piezoelectric ceramic. However, the vibrational energy transfer system has a pitfall in energy consumption. When the movement of the forceps is interrupted by the tissue, the horn which transfers the vibrational energy of the transducer will be affected. A study was performed to recognize different tissues by measuring the impedance of the transducer of the ultrasonic shears in order to find the factor of energy consumption according to the tissue. In the first stage of the study, the voltage and current of the transducer connecting portion were measured, along with the phase changes. Subsequently, in the second stage, the impedance of the transducer was directly measured. In the final stage, using the handpiece, we grasped the tissue and observed the impedance differences appeared in the transducer To verify the proposed tissue distinguishing method, we used the handpiece to apply a force between 5N and 10N to pork while increasing the value of the impedance of the transducer from 400 ${\Omega}$.. It was found that fat and skin tissue, tendon, liver and protein all have different impedance values of 420 ${\Omega}$, 490 ${\Omega}$, 530 ${\Omega}$, and 580 ${\Omega}$, respectively. Thus, the impedance value can be used to distinguish the type of tissues grasped by the forceps. In the future study, this relationship will be used to improve the energy efficiency of ultrasonic shears.

• 한국수소및신에너지학회논문집
• /
• 제29권2호
• /
• pp.163-169
• /
• 2018

The present article discusses about the measurement techniques of acoustic impedance that becomes one of the important acoustic characteristics of various boundaries found inside of propulsion systems. Acoustic characteristics including acoustic impedance and reflection coefficient can be often assessed and estimated by use of the two-microphone method. Theoretical expressions of acoustic impedance and reflection coefficient measured in an impedance tube are presented for both cases with mean flow and without flow, and the practical application of the method through calibration is also provided. The acoustic impedance and the reflection coefficient are related with axial locations of microphones, thermodynamic characteristics of gas inside, and the transfer function between the pressure wave measurements at multiple locations.