• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.527-532
• /
• 2009

Recently, Interior Permanent Magnet Machine(IPM) is widely used for traction motor in the high speed train. Due to the high efficiency and high power density of the IPM, it has lots of heat sources such as iron loss and copper loss. These heat sources can cause the demagnetization of permanent magnet, losses in output power and even irreversible defect of the IPM. To prevent the power loss caused by heat sources, the accurate thermal analysis has to be carried out. For the thermal analysis of the IPM, the thermal network is designed for this traction motor. The thermal analysis has executed at rated speed operation. The result of thermal network analysis can be used for the IPM design process.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.267-274
• /
• 2009

To predict efficiency of Interior Permanent Magnet Synchronous Motors(IPMSM) and to cope with the demagnetization risk of permanent magnets used in the IPMSM, accurate iron analysis of the IPMSM is very important at the motor design stage. In the analysis, we calculate the operation condition such as rotor speed and current angle. and then, we analyzed the iron loss of the machine for electric vehicle according to its driving condition. From the analysis results, it was shown that the harmonic iron losses of stator are larger than before at field-weakening region. In addition, it was revealed that rotor iron loss mainly induced by stator slot-ripples is independent of current angle and only varied according to the speed.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.351-355
• /
• 2009

There are two types of controller between railway and train. those are the Continuous Message Controller and the Intermittent Message Controller using for KHSR. The conventional Intermittent Message Controller board used a variable resister for setting the phase, but the variable resister affected some environmental facts, such as temperature, humidity, and vibration, etc. And It is requirement of reduction message processing time for speed-up operation in Next-Generation High-Speed Rail. This study suggests how to solve the problem described above. Using FPGA is quite profitable. It's easy to use and maintain, flexible with the New algorithm to fix up the problem.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.626-631
• /
• 2007

Technical requirements associated with derailment to ensure running safety of train are discussed. By using estimated derailment coefficient ratio, interaction of various parameters such as operation velocity, curve radius, cant, track irregularity, suspension stiffness and static wheel load ratio are analyzed to enhance derailment safety. Sensitivity analysis in terms of pattern and passage speed of curve is performed by using rolling stock and track conditions associated with SMRT Line No. 5.

• International Journal of Railway
• /
• v.8 no.1
• /
• pp.21-29
• /
• 2015

This study focuses on the performance enhancement of the levitation and guidance control system in urban and medium-to high-speed magnetic levitation trains. A levitation control system, which is currently being tested in Yeongjongdo, is a single controller that is neither designed nor produced on the basis of redundancy. Hence, vehicular stability and reliability should be improved for the situation in which levitation failure occurs because of a breakdown in a controller during vehicle operation. In addition, the control system should be developed to control electromagnetic levitation considering changes in normal force according to changes in the driving force of the propulsion system.

• International Journal of Railway
• /
• v.8 no.1
• /
• pp.30-34
• /
• 2015

The Maglev(UTM-02) project is leading by Korea Institute of Machinery & Materials and financially supported from the ministry of Commerce, Industry and Energy. The early development stagy of Maglev(UTM-02) was adopted the general urban railway pneumatic brake system due to the Korea domestic industrial environment. Currently there is two commercial operation Light Railway Train(LRT) system in Korea. One is U-Line in Uijungbu, and the other is Everline in Yongin. Both LRT systems are adopting high performance light weight hydraulic brake system. But those design and manufacturing core technology of the brake system is came from a major brake system companies located from aboard. Currently various studies have been continued to increase practical application and to improve competitiveness on performance for each sub-system of Maglev. Also in case of brake system, developing competitive hydraulic brake system is required. In this study, we have introduced the development process and performance evaluation of the new hydraulic brake system of Maglev.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.73-78
• /
• 2008

There has been need for safety monitoring systems for the social infrastructures. These infrastructures are subject to degradation over time, reduced functionality, and loss of functionality as a result of factors such as a wide variety of installation environments, natural disasters, and nearby work. Therefore, it is necessary to perform appropriate inspections, repairs, and renovations to ensure safe and efficient maintenance and operation. This paper introduces the example of the development of the safety monitoring system for operating railway tunnel. Tunnel profile measuring system using laser beam, crack gauges, accelerometer and a pluviometer were implemented to monitor the safety of a deteriorated tunnel. The measured data were transferred through wireless network and analyzed in real time. The safety criteria for tunnel stabilities and train operations are also discussed.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1024-1028
• /
• 2008

The ballast, one of track components, plays an essential role as intermedium in transmitting train load to subgrade safely, and the deterioration of ballast directly effects the growth of track irregularity. In this study, we determined the main factor of ballast deterioration was miniature of ballast gravel caused MTT(Multiple Tie Tamper) works and accumulated traffic loads. To estimate the deterioration characteristics of ballast, we carried out field test through track construction for test and the model test simulating the actual operation environment, have done a comparative analysis with the sample's result(crushing rate) of high-speed railroad running actually.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.117-121
• /
• 2021

The Multi-crew Pilot License (MPL) is a new pilot qualification introduced by ICAO to train co-pilots for transport aircraft based on efficient and stable competency to respond to changes in the operating environment and technology. ICAO and the European Union Aviation Safety Agency (EASA) require a minimum flight of 240 hours for MPL qualification training, and allow the use of flight simulation training devices (FSTDs) for most of the training, specifying the performance requirements for FSTDs. As South Korea is also preparing for the operation of the MPL training program, it is essential to establish the operating standards for FSTDs required for MPL training. This study aims to identify the international standards for FSTDs related to MPL training, and to compare them with the current operating standards for FSTDs in South Korea for presenting a standard (draft) that can be used when introducing domestic MPL training programs in the future.

• Journal of Korea Multimedia Society
• /
• v.21 no.12
• /
• pp.1473-1480
• /
• 2018

The extraction and recognition of human motion characteristics need to combine biometrics to determine and judge human behavior in the movement and distinguish individual identities. The so-called biometric technology, the specific operation is the use of the body's inherent biological characteristics of individual identity authentication, the most noteworthy feature is the invariance and uniqueness. In the past, the behavior recognition technology based on the single characteristic was too restrictive, in this paper, we proposed a mixed feature which combined global silhouette feature and local optical flow feature, and this combined representation was used for human action recognition. And we will use the KTH database to train and test the recognition system. Experiments have been very desirable results.