• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.2
• /
• pp.47-58
• /
• 2011

Snoop was suitably designed for wired and wireless network as having snoop agent module in BS(Base Station) which is connecting to both wired and wireless network in order to supplement the problems of TCP. This study examined performance difference by using the web traffic taken wide possession in current internet traffic. The web traffic has greater amount of traffic, shorter life time, and smaller size than other traffics. This study found that snoop producing performance improvement of wireless network in the network mixed with the wired and wireless lead performance loss when transmitting web traffic. This study found that in case of web traffic is transmitted it bring a performance improvement of web traffic as computing BWE((Bandwidth Expansion), and also found that this study prove of performance improvement by decreasing local retranmission.

• IEIE Transactions on Smart Processing and Computing
• /
• v.1 no.3
• /
• pp.182-191
• /
• 2012

This paper proposes a high performance QoS (Quality of Service) traffic transmission scheme to provide real-time multimedia services in wireless networks. This scheme is based on both a traffic estimation of the mean rate and a header compression method by dividing this network model into two parts, core RTP/UDP/IP network and wireless access parts, using the IEEE 802.11 WLAN. The improvement achieved by the scheme means that it can be designed to include a means of provisioning the high performance QoS strategy according to the requirements of each particular traffic flow by adapting the header compression for real-time multimedia data. A performance evaluation was carried out to show the effectiveness of the proposed traffic transmission scheme.

• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1239-1244
• /
• 2003

In this paper, we analyzed cell loss rate performance for random traffic sources in wireless ATM(Asynchronous Transfer Mode) access architecture, which consists of access node and wireless channel. Applying queueing model to cell level at access node and considering burst error characteristics in wireless channel, we derived a formula about the cell loss rate of the random traffic in the wireless ATM access architecture. We also applied FEC(Forward Error Correction) schemes to improve the cell loss rate of random traffic. When we applied FEC schemes in the wireless ATM access architecture, we confirmed that the concatenated code provides the most superior performance compared to any other codes.

• Information and Communications Magazine
• /
• v.32 no.10
• /
• pp.31-40
• /
• 2015

This paper investigates several existing techniques to reduce high-availability seamless redundancy (HSR) traffic. HSR is a redundancy protocol for Ethernet networks that provides duplicated frames for separate physical paths with zero recovery time. This feature makes it very useful for real-time and mission-critical applications, such as military applications and substation automation systems. However, the major drawback of HSR is that it generates too much unnecessary redundant traffic in HSR networks. This drawback degrades network performance and may cause congestion and delay. Several HSR traffic reduction techniques have been proposed to reduce the redundant traffic in HSR networks, resulting in the improvement of network performance. In this paper, we provide an overview of these HSR traffic reduction techniques in the literature. The operational principles, advantages, and disadvantages of these techniques are investigated and summarized. We also provide a traffic performance comparison of these HSR traffic reduction techniques.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.653-661
• /
• 2012

High-availability seamless redundancy (HSR) is a redundancy protocol for Ethernet networks that provides two frame copies for each frame sent. Each copy will pass through separate physical paths, pursuing zero fault recovery time. This means that even in the case of a node or a link failure, there is no stoppage of network operations whatsoever. HSR is a potential candidate for the communications of a smart grid, but its main drawback is the unnecessary traffic created due to the duplicated copies of each sent frame, which are generated and circulated inside the network. This downside will degrade network performance and might cause network congestion or even stoppage. In this paper, we present two approaches to solve the above-mentioned problem. The first approach is called quick removing (QR), and is suited to ring or connected ring topologies. The idea is to remove the duplicated frame copies from the network when all the nodes have received one copy of the sent frame and begin to receive the second copy. Therefore, the forwarding of those frame copies until they reach the source node, as occurs in standard HSR, is not needed in QR. Our example shows a traffic reduction of 37.5%compared to the standard HSR protocol. The second approach is called the virtual ring (VRing), which divides any closed-loop HSR network into several VRings. Each VRing will circulate the traffic of a corresponding group of nodes within it. Therefore, the traffic in that group will not affect any of the other network links or nodes, which results in an enhancement of traffic performance. For our sample network, the VRing approach shows a network traffic reduction in the range of 67.7 to 48.4%in a healthy network case and 89.7 to 44.8%in a faulty network case, compared to standard HSR.

• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2010

This study deals with the traffic accident according to the improvement projects of frequent accident locations. The objective is to analyze the impact of improvements on the accident reduction. In pursuing the above, the study gives the particular attentions to developing the models based on the data of 70 intersections improved. The main results analyzed are as follows. First, 4 multiple linear regression accident models(total, side right-angle, rear end and side stripe accident) which were statistically significant were developed. Second, total accidents reduction by sight-distance and turning traffic flow improvements, side right-angle by sight-distance, over-speed and lane operation, rear end by turning traffic flow, signal and lane operation, and side stripe by traffic impedance improvements were analyzed. Finally, the above 4 models were evaluated to be statically significant through the correlation analysis and pair-sample t-test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.519-525
• /
• 2013

The traffic classification is a preliminary and essential step for stable network service provision and efficient network resource management. However, the payload signature-based method has a significant drawback in high-speed network environment that the processing speed is much slower than other method such as header-based and statistical methods. In this paper, We propose the server IP, Port cache-based traffic classification method using application traffic locality to improve the processing speed of traffic classification. The suggested method achieved about 10 folds improvement in processing speed and 10% improvement in completeness over the payload-based classification system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.97-102
• /
• 2023

This study is to provide improvement of tester for IoT system, which has recently become diversified and large-scale and It is about a method to improve the packet processing performance of the tester and securing flexibility in traffic protocol creation and operation. The purpose of this study is to design a OSS DPDK-based high-speed IoT network performance test system, which pre-verifies and measures the performance of data traffic transmission in an increasingly sophisticated high-capacity IoT network system. The basic structure of the high-speed IoT performance tester was designed using a DPDK-based traffic generator, the expected effect was suggested to traffic modeling and packet generation capability when the system was applied through experiments

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.8
• /
• pp.335-342
• /
• 2013

Nowadays, the traffic type and behavior are extremely diverse due to the growth of network speed and the appearance of various services on Internet. For efficient network operation and management, the importance of application-level traffic identification is more and more increasing in the area of traffic analysis. In recent years traffic identification methodology using statistical features of traffic flow has been broadly studied. However, there are several problems to be considered in the identification methodology base on statistical features of flow to improve the analysis accuracy. In this paper, we recognize these problems by analyzing the ground-truth traffic and propose the solution of these problems. The four problems considered in this paper are the distance measurement of features, the selection of the representative value of features, the abnormal behavior of TCP sessions, and the weight assignment to the feature. The proposed solutions were verified by showing the performance improvement through experiments in campus network.

• IE interfaces
• /
• v.16 no.3
• /
• pp.311-321
• /
• 2003

We propose the improved channel assignment and management methods for an efficient use of traffic channel resource for supporting 12.2 Kbps, 64 Kbps, and 384 Kbps traffic with the different quality of service(QoS) in the radio network controller(RNC) in asynchronous IMT-2000 system. We consider two types of traffic channel block assignments for utilizing the traffic channel efficiently; the Completely Shared(CS) channel assignment and the Partially Dedicated and Partially Shared(PDPS) channel assignment. The former is that all traffic channel blocks are completely shared with all traffic types. The latter is that some traffic channel block is independently assigned to each traffic type and the other blocks are completely shared with some traffic type. We also propose the traffic channel management method which consists of the block and task management step, for efficiently assigning, releasing, and managing the channel resource. Finally, we evaluate the performance through various numerical examples when applying our proposed channel block assignment and resource management methods.