• 대한교통학회지
• /
• 제34권2호
• /
• pp.123-134
• /
• 2016

교차로는 국가 도로체계에 있어서 작은 부분을 차지하고 있지만, 2014년 통계에 따르면 교차로 교통사고는 전체 교통사고의 약 44.3%를 차지하고 있다. 이에 신호교차로에 대한 연구는 지속적으로 수행되고 있는 반면에, 무신호교차로에 대한 연구는 아직도 미진한 상태이다. 따라서 본 연구의 목적은 지방부 무신호교차로 교통사고의 특성분석과 순서형 로지스틱 모형을 이용한 사고 심각도의 영향요인을 파악하는 것이다. 무신호교차로의 교통사고들은 대부분 주간시간에 측면직각 충돌에 발생하였으며 4지 무신호교차로의 교통사고가 3지 무신호교차로에 비해 약 1.53배 많이 발생하였다. 교통사고의 주요 원인들은 운전자의 안전운전불이행 및 교차로 통행방법 위반에 의해 발생한 것으로 나타났다. 사고 심각도 모형의 개발 결과, 지방부 무신호교차로의 2가지 형태(3-지, 4-지)와 3개의 모형식이 개발되었다. 주요 영향요인으로 교차로 시거 장애, 일평균교통량, 주야간시간대, 교차각, 중차량 비율, 교통법규위반 및 부도로 차로수 등이 선정되었다.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.7-12
• /
• 2018

The Korean New Car Assessment Program (KNCAP) is a program to evaluate the safety of automobiles. In the safety assessment method, there are frontal collision, partial frontal collision, side collision, pillar collision, and left stability in the collision safety category. Among them, Korean in-depth analysis data shows that there are a lot of side collision accidents and it is necessary to protect them. This study will analyze the side collision accident that occurred in actual traffic accident based on Korea In-Depth Accident Study (KIDAS) and investigate the effect of center airbag on passenger in under side collision. In addition, with simulated side collision scenarios in the various side impact directions, it was investigated how the center airbag affects the driver and passenger in terms of kinematic and injury levels.

• 한국항해항만학회지
• /
• 제35권4호
• /
• pp.289-297
• /
• 2011

This paper details the maritime accidents that occurred in the Philippines from 1972 to 2010. Firstly, it describes the general maritime situation in the country. It was followed by the traffic and safety infrastructure and the prevailing weather in the archipelago. The third section deals with the accidents' statistics and their geographical locations which is further sub-divided into three regions. It is grouped according to 10-year period. This paper describes the actual maritime situations, the pertinent national regulations, the inter-agencies policies and their safety regimes. It illustrates the shipping environment in the country including the maritime aids and infrastructure and the on human element factors.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.254-260
• /
• 2017

Data packets from sensor nodes scattered over measuring fields are generally forwarding to the sink node, which may be connected to the wired networks, in a wireless sensor network. So many data packets are gathered near the sink node, resulting in significant data packet collisions and severe transmission latency. In an event detection application such as object tracking and military, bursty data is generated when an event occurs. So many data packet should be transmitted in a limited time to the sink node. In this paper, we present a delay efficient and bursty traffic friendly MAC protocol called DEBF-MAC protocol for wireless sensor networks. The DEBF-MAC uses a slot-reserved mechanism and sleep period control method to send multiple data packets efficiently in an operational cycle time. Our simulation results show that DEBF-MAC outperforms DW-MAC and SR-MAC in terms of energy consumption and transmission delay.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.389-389
• /
• 2000

The number of automobiles is rapidly increasing , as are the importance of the car as a way of transportation, and the variety of its uses. In these surroundings, a safety, one of the primary factors which must be considered in automotive engineering, demands a system that aids the driver's vision and perception. In this point of view, development of the more promoted system that complement the existing passive method which relies on just man's ability is the important issue of the advanced traffic system including ITS. In this paper, we provide an algorithm and implementation of a control system that warns the collisions ahead and avoids this situation, using informations about the host-car, target-car and surroundings. The warning is made by an algorithm that decides the degree of safely. With this degree of safely, the controller automatically controls a vehicle's speed to a proper level.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.177-184
• /
• 2002

The concrete median barriers are the most popular safety appurtenances that can be installed on narrow medians and are effective in keeping uncontrolled vehicles from crossing into opposing lanes of traffic. It is necessary to install and maintain median barriers because it is very difficult to reserve enough room required for medians in KOREA. And concrete median barriers are accepted as the actual alternatives for median barriers, mostly because they require almost no maintenance even after serious collisions. Typical concrete median barriers are 810mm high and have 596mm high glare screens on top of them. But we have experienced a number of “climb” and “roll-over” accidents of heavy vehicles until now, and most of all, there have been some serious accidents caused by the part of broken glare screens. We have performed many computer simulations for the evaluation of the crashworthiness of concrete median barriers, and through the simulations we have tried to find a proper type of concrete median barrier.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.317-320
• /
• 2004

The exponential back-off algorithm doubles the back-off size after each collision without considering network traffic status, which causes degradation of system performance. In this paper, we propose a linear random back-off mechanism which dynamically selects the back-off window size based on the channel status which includes the number of active stations and collisions to significantly increase the protocol capacity. We present an analytical model for the saturated throughput of our linear random back-off algorithm. Simulation results show that performance can be substantially enhanced if binary exponential back-off algorithm is replaced by a linear back- off algorithm.

• 자동차안전학회지
• /
• 제12권1호
• /
• pp.6-14
• /
• 2020

Personal mobility, which was used exclusively for leisure activities, has recently been used as a means of transportation, and it is expected to increase its role as the next generation transportation. Sales of personal mobility are increasing rapidly, but the problem is that traffic accidents are also increasing. In this study, human body injury caused by various collisions between electric wheel users and road users that occur on bicycle or pedestrian roads mainly used by personal mobility is analyzed through collision analysis and collision risk analysis. In the case of the collision accident for electric wheel, it is analyzed that the road users are more likely to be injured on the pedestrian road than the bicycle road. In addition, the head hit each other or fall and hit the floor caused severe head injury.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2005년도 하계학술대회
• /
• pp.67-73
• /
• 2005

For power constrained applications, IEEE 802.15.4 networks may be operated in beacon enabled mode with inactive period. In this paper, we propose the Virtual Arrival Mechanism (VAM) to avoid the congestion at the beginning of each contention access period (CAP). Virtual Arrival Mechanism (VAM) is a kind of traffic shaping that spread the traffics congested at the beginning of CAP into the whole CAP. By using VAM, collisions and energy consumption can be reduced. Finally, we evaluate the performance enhancement of VAM using NS-2 simulator.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.114-122
• /
• 2021

In this paper, an automated vehicle intersection collision accident was analyzed through simulation. Recently, the more automated vehicles are distributed, the more accidents related to automated vehicles occur. Accidents may show different trends depending on the sensor characteristics of the automated vehicle and the performance of the accident prevention system. Based on NASS-CDS (National Automotive Sampling System-Crashworthiness Data System) and TAAS (Traffic Accident Analysis System), four scenarios are derived and simulations are performed. Automated vehicles are applied with a virtual system consisting of an autonomous emergency braking system and algorithms that predict the route and avoid collisions. The simulations are conducted by changing the sensor angle, vehicle speed, the range of the sensor and vehicle speed range. A range of variables considered vehicle collision were derived from the simulation.