• 제목/요약/키워드: toxic substance

검색결과 234건 처리시간 0.024초

교육용 풍력터빈제어 실습장치 개발 (Development of an educational wind turbine control equipment)

  • 허준영;박성수
    • 한국실천공학교육학회논문지
    • /
    • 제3권2호
    • /
    • pp.75-82
    • /
    • 2011
  • 최근들어 화석 연료의 고갈, 지구 온난화등의 문제들로 인해, 녹색성장 기술이 중요시 되고 있다. 에너지 문제와 녹색성장 기술이 융합된 신성장동력 확보를 위해 풍력, 태양광, 연료전지, 바이오 연료등에 많이 투자가 확대되고 있다. 그 중 풍력발전은 다른 에너지에 비해 경제성이 높고, 유해물질의 배출이 거의 없다. 따라서 최근 정부나 기업들에서도 많은 비용을 투자하여 풍력 기술 개발에 적극적인 지원을 하고 있지만, 풍력 기술을 선도하는 해외 선진국들에 비해서 국내에서의 관련 교육과 장비는 연구소 수준에 머물고 있다. 그러므로 관련 산업에서 요구하는 기본 기술의 저변화와 기술적 향상을 위해 실제 산업에서 적용하고 있는 시스템과 유사한 자비와 교육과정의 개발이 필요한 실정이다. 본 논문에서는 실험을 통하여 풍력터빈제어의 이론적인 내용을 수강생들이 보다 쉽게 이해할 수 있도록 교육용 풍력터빈제어 실습장치를 개발하고 교육효과를 알아보았다. 개발된 실습장치를 소개하고, 각각의 실습장치를 소개한다. 마지막으로 설문조사를 통하여 반응도 평가를 통한 교육효과를 검증하였다.

  • PDF

수출입식물 훈증 작업자의 브롬화메틸 노출수준 평가 (Assessment of Methylbromide Exposure Levels in Fumigation Workers on Import and Export Plant)

  • 정지연;이광용;조숙자;박승현
    • 한국산업보건학회지
    • /
    • 제30권1호
    • /
    • pp.50-57
    • /
    • 2020
  • Objectives: Methyl bromide is a highly toxic substance that can cause systemic poisoning, neurotoxicity, pulmonary edema. Methyl bromide is a widespread fumigation agent used for import and export quarantine, but there is little data on exposure assessment of workers participating in such fumigation. Therefore, this study aims to investigate the exposure level of methyl bromide among workers and the concentration distribution of methyl bromide in the workplace during fumigation. Methods: For this study, one wood tent and one container fumigation area in Pusan, and one wood tent fumigation area in Incheon were investigated over three months from June 2001. Results: Methyl bromide exposure levels for container fumigation workers were from undetected to 1.86 ppm and from undetected to 2.28 ppm for tent fumigation workers as an 8 hr TWA. After opening the container door, the methyl bromide concentration in the container decreased rapidly over time, but the concentration remained over 1 ppm even after about one hour. The concentrations around the tent during its removal were highly affected by wind, but were detected in a range from undetected to 11.97 ppm. Conclusions: This study confirmed that both container and tent fumigation caused workers to exceed the exposure limit of 1 ppm as an 8 hour TWA. In particular, it could be confirmed that a situation exists in which the worker may be exposed to high concentrations of methyl bromide when opening the container or removing the tent due to the nature of the work. Therefore, it is very important to improve working methods and to wear appropriate personal protective equipment.

유해물질 차단을 위한 방호복의 착용실험에 관한 연구 (A Study on Wearing Test of Protective Clothing against a Toxic Substance)

  • 정명희;박순자;신정숙
    • 한국의류학회지
    • /
    • 제30권11호
    • /
    • pp.1626-1635
    • /
    • 2006
  • The purpose of this study was to search for comfortable protective clothing for waste incinerator workers. The experimental protective clothing came in two types: one whose outer side made use of polypropylene film, and the inner side, a non-woven rayon fabric processed with charcoal with a 10% density (CF): and one whose outer side made use of polyolefine and polyamide films, and the inner side, a non-woven polypropylene fabric (NNCF). Experiments were conducted on five healthy adult women whose average age was 21. These experiments were conducted at a climate chamber, in which the temperature and relative humidity were set below $28{\pm}1^{\circ}C\;and\;50{\pm}10%$, respectively. Measured were the rectal temperature, the skin temperature, the sweating rate, the weight loss, the heart rate, the blood pressure, the temperature, and the relative humidity of a microclimate and subjective sensation. These were measured within a period of 60 min, consisting of a 20-min stable period, a 20-min exercise period (walking exercise for 2 miles/hr on a treadmill), and a 20-min recovery period. Through this experiment, the differences between the human body's physiological reactions to CF and NNCF clothing, and the human body's comfort levels when wearing these, were determined.

철, 구리, 은염이 첨착된 활성탄의 제조 (Manufacture of Iron, Copper and Silver Ions Impregnated Activated Carbon)

  • 박승조;최성우
    • 대한환경공학회지
    • /
    • 제28권4호
    • /
    • pp.384-388
    • /
    • 2006
  • 본 연구는 극성 및 독성물질에 대한 활성탄의 흡착력을 향상시키기 위하여, 활성탄을 산 처리 후 활성탄 50 g에 0.1 M $FeSO_4{\cdot}7H_2O,\;CuSO_4{\cdot}5H_2O,\;AgNO_3$ 용액을 300 mL 첨가하여 jar tester를 이용하여 60 rpm의 속도로 1시간 교반시켜 철, 은, 구리 이온을 첨착하였다. 금속 첨착과정으로 제조한 금속 첨착활성탄의 표면 성상 및 화학적 특성을 규명하기 위하여 비표면적, 세공용적 및 분포, 주사현미경 촬영, 흡착등온 등의 실험을 하였다. 산 처리 활성탄에 철, 구리, 은을 첨착할 경우 미세세공이 중간세공과 거대세공으로 전환되어 금속 첨착량이 약 1.3배 정도 증가하였고 금속 첨착활성탄내에서 미세세공에 의한 물리적 흡착과 침착된 금속 이온에 의한 화학적 흡착이 동시에 가능하였다.

The Phylogenetic Relationship of Several Oscillatorian Cyanobacteria, Forming Blooms at Daecheong Reservoirs, Based on Partial 16S rRNA Gene Sequences

  • Lee, Wook-Jae;Bae, Kyung-Sook
    • Journal of Microbiology and Biotechnology
    • /
    • 제11권3호
    • /
    • pp.504-507
    • /
    • 2001
  • The partial 16S gene sequences of six filamentous cyanobacterial strains, Oscillatoria lmosa KCTC AG10168, Oscillatoria princeps KCTC AG10153, Oscillatoria sp. KCTC AG 10184, Phormidium tenue KCTC AG10158, Phormidium parchydematicum KCTC AG10164, and Lyngbya hieronymusii KCTC AG10199, which were isolated in the late summer at Daecheong Reservoirs, were determined and assigned their phylogenetic and taxonomic position among taxa of order Ocillatoriales whose partial 16S rRNA gene sequences aligned in this suty, were very heterogeneously clustered with other taxa. The two strains, Oscillatoria limosa KCTC AG10168 and O. princeps KCTC AG10153, formed a cluster with O. sancta PCC7515, which supported 64% of the bootstrap trees with high similarity (19-96.15%). Strain Oscillatoria sp. KCTC AG10184, that was known to produce a nasty substance, was closely related to the toxic Oscillatoria group. The study on morphological variation in various environments and toxin production will confirm the taxonomic status of these species. Phormidium tenus KCTC AG10158 and Phormidium parchydematicum KCTC AG10164 made a cluster with other oscillatorian species of Phormidium, Oscillatoria, and Leptolynbya, which supproted 100% of the bootstrap trees with a very high sequence smilarity (96.8-99.8%) in thsi study. The sequence analysis in this study also supported that taxa of oscillatoriales are not monophyletic. Some of the fractures, such as the presence or absence of sheath and cell shape, which were used to define them, would be inadequate and should be reconfirmed. We suggest that sequences of partial 16S rRNA gene fragments aligned in this study should be more useful than morphological features in the identification and reconfirmation of the taxonomic status of these oscillactorian cyanobacteria.

  • PDF

형방지황탕으로부터 분리된 HTI의 항진균활성에 대한 연구 (In Vitro Antifungal Activity of HTI Isolated from Oriental Medicine, Hyungbangjihwang-tang)

  • 성우상;서영배;이동건
    • 한국미생물·생명공학회지
    • /
    • 제37권3호
    • /
    • pp.273-279
    • /
    • 2009
  • 형방지황탕은 한의학에서 중요한 약처방으로 인간의 기력 회복에 약효가 탁월한 것으로 알려져 있다. 본 연구에서는 형방지황탕으로부터 항생 물질(HTI)을 분리하여 항진균활성 및 그 작용기작을 검토하였다. 그 결과 각종 병원성 진균에 대해 항진균 활성을 나타내었으며, 인간 적혈구에 대해서는 세포독성이 나타나지 않은 것으로 확인되었다. 또한 캔디다 알비칸스를 대상으로 스트레스 방어기작과 세포 이형성 유도에 HTI이 미치는 영향을 검토한 결과, 트리 할로즈의 증가와 이형성 유도에 영향을 미치는 것으로 나타나 이러한 현상이 항진균활성에 상관관계가 있음을 확인하였으며, 또한 진균의 세포주기에 미치는 영향도 항진균 활성의 요인이 됨을 밝혔다.

Quantitative Exposure Assessment of Various Chemical Substances in a Wafer Fabrication Industry Facility

  • Park, Hyun-Hee;Jang, Jae-Kil;Shin, Jung-Ah
    • Safety and Health at Work
    • /
    • 제2권1호
    • /
    • pp.39-51
    • /
    • 2011
  • Objectives: This study was designed to evaluate exposure levels of various chemicals used in wafer fabrication product lines in the semiconductor industry where work-related leukemia has occurred. Methods: The research focused on 9 representative wafer fabrication bays among a total of 25 bays in a semiconductor product line. We monitored the chemical substances categorized as human carcinogens with respect to leukemia as well as harmful chemicals used in the bays and substances with hematologic and reproductive toxicities to evaluate the overall health effect for semiconductor industry workers. With respect to monitoring, active and passive sampling techniques were introduced. Eight-hour long-term and 15-minute short-term sampling was conducted for the area as well as on personal samples. Results: The results of the measurements for each substance showed that benzene, toluene, xylene, n-butyl acetate, 2-methoxy-ethanol, 2-heptanone, ethylene glycol, sulfuric acid, and phosphoric acid were non-detectable (ND) in all samples. Arsine was either "ND" or it existed only in trace form in the bay air. The maximum exposure concentration of fluorides was approximately 0.17% of the Korea occupational exposure limits, with hydrofluoric acid at about 0.2%, hydrochloric acid 0.06%, nitric acid 0.05%, isopropyl alcohol 0.4%, and phosphine at about 2%. The maximum exposure concentration of propylene glycol monomethyl ether acetate (PGMEA) was 0.0870 ppm, representing only 0.1% or less than the American Industrial Hygiene Association recommended standard (100 ppm). Conclusion: Benzene, a known human carcinogen for leukemia, and arsine, a hematologic toxin, were not detected in wafer fabrication sites in this study. Among reproductive toxic substances, n-butyl acetate was not detected, but fluorides and PGMEA existed in small amounts in the air. This investigation was focused on the air-borne chemical concentrations only in regular working conditions. Unconditional exposures during spills and/or maintenance tasks and by-product chemicals were not included. Supplementary studies might be required.

자동차 전장품용 무연솔더 접합부의 시리즈 시험 유효성 (Validation of sequence test method of Pb-free solder joint for automotive electronics)

  • 김아영;오철민;홍원식
    • Journal of Welding and Joining
    • /
    • 제33권3호
    • /
    • pp.25-31
    • /
    • 2015
  • Due to environmental regulations (RoHS, WEEE and ELV) of the European Union, electronics and automotive electronics have to eliminate toxic substance from electronic devices and system. Specifically, reliability issue of lead-free solder joint have an increasing demand for the car electronics caused by ELV banning. The authors prepared engine control unit and cabin electronics soldered with Sn-3.0Ag-0.5Cu (SAC305). To compare with the degradation characteristics of solder joint strength, thermal cycling test (TC), power-thermal cycling test (PTC) and series tests were conducted. Series tests were conducted for TC and PTC combined stress test using the same sample in sequence and continuously. TC test was performed at $-40{\sim}125^{\circ}C$ and soak time 10 min for 1000 cycles. PTC test was applied by pulse power and full function conditions during 100 cycles. Combined stress test was tested in accordance with automotive company standard. Solder joint degradation was observed by optical microscopy and environment scanning electron microscopy (ESEM). In addition, to compare with deterioration of bond strength of quad flat package (QFP) and chip components, we have measured lead pull and shear strength. Based on the series test results, consequently, we have validated of series test method for lifetime and reliability of Pb-free solder joint in automotive electronics.

Ecotoxicity Estimation of Hazardous Air Pollutants Emitted from Semiconductor Manufacturing Processes Utilizing QSAR

  • Park, Hyung-Geun;Yeo, Min-Kyeong
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권12호
    • /
    • pp.3755-3761
    • /
    • 2013
  • This study aims to assess the ecological risk of the hazardous air pollutants (HAPs) emitted in the semiconductor manufacturing processes in Korea by using Quantitative Structure Activity Relationship (QSAR, EPA, US, EPI $Suite^{TM}$ 4.1). Owing to the absence of environmental standards of hazardous air pollutants in the semiconductor manufacturing processes in Korea, 18 HAPs in the semiconductor field included in both the US EPA NESHAPs and the hazardous air pollutant list of Ministry of Environment in Korea were selected. As a results 8 chemicals (44.4%) of the selected 18 HAPs were VOCs. Cyanides (cyanides) and ethylene oxides (epoxy resins), and tetrachloro-ethylene (aliphatic compounds, halides) showed long half-lives. Cyanide HAPs especially had the highest half-life with the estimated value of 356.533 days. Nickel compounds (heavy metal compounds) possessed the highest water solubility followed by acetaldehyde (aldehyde compounds), ethylene oxides, and 1,4-dioxanes. The halides, including tetrachloro-ethylenes, carbon tetra-chlorides, benzene (aromatic compounds), and lead (heavy metals), are estimated to take the longest time for biodegradation. Tetrachloroethylene, with the acute toxicity end point of 3.685-7.033 mg/L, was assessed to be the most highly toxic substance among the 18 HAPs. However, considering the absence of the HAPs in the common category of log $K_{ow}{\geq}4$and $BCF{\geq}500$, which indicates the standard of bioconcentration potentials, potentials of the bioconcentration are considered to be low.

축육 소시지에 첨가한 키토산의 항산화 효과 (Antioxidative Effects of Chitosan Meat Sausage)

  • 윤선경;김연주;안동현
    • 한국식품영양과학회지
    • /
    • 제30권3호
    • /
    • pp.477-481
    • /
    • 2001
  • 키토산은 오징어 내장유를 이용한 oil emulsion 중에서 분자량이 높을수록 항산화 효과가 큰 것으로 나타났다. 또한 키토산을 다량의 지방이 포함된 축유 소시지에 첨가하여 $10^{\circ}C$ 저장하면서 항산화 효과를 측정한 결과, 키토산을 분자량별로 0.20% 첨가하고 아질산염을 150 ppm 첨가하였을 경우와 아질산염을 15 ppm 첨가하였을 경우 모두 키토산의 분자량이 높을수록 항산화 효과가 큰 것으로 나타났다. 어떤 분자량의 키토산에 있어서도 첨가량이 증가할수록 항산화 효과는 크게 나타났다. 키토산의 전자공여능은 분자량이 크고 농도가 높아질수록 큰 것으로 나타났다. 본 실험의 결과 키토산의 항산화 효과는 분자량이 클수록 첨가량이 많을수록 우수하며, 특히 가열 처리시에 효과가 크게 나타났다. 그러나 키토산의 항산화 효과는 단독으로 항산화제로 사용하기에는 미흡하여 소시지와 같은 지방이 포함된 식품에 있어 다른 항산화제와 더불어 키토산을 첨가하면 어느 정도 보존성 및 산화방지에 큰 효과를 얻을 수 있을 것으로 사료된다.

  • PDF