• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.2
• /
• pp.113-120
• /
• 2015

Under the penetration of smartphones equipped with a variety of features grows globally, the efficient using of a variety of functions of smartphones has been increased. In accordance with this trend, a lot of researches on the remote control method using the smart phone for consumer products in home networks. Input methods of the current smpartphoes are typically button-based inputs through touching. The button input methods are inconvenient for people who are not familiar touch. Therefore, the researches on the different input schemes to replace the touch methods are required. In this paper, we propose a gesture based input method to replace the touch-sensitive input that of the existing smartphone applications, and a way to apply it to home networks. The proposed method uses three-axis acceleration sensor which is built into smatphones, and it also defines six kinds of gestures patterns that may be applied to home network systems by measuring the recognition rates.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.706-713
• /
• 2002

In the multi-pass welding of pressure vessels or ships, the mechanical touch sensor system is generally used together with a manipulator to measure the gap and depth of the narrow gap to perform seam tracking. Unfortunately, such mechanical touch sensors may commit measuring errors caused by the eterioration of the measuring device. An automation system of narrow gap multi-pass welding using a laser vision system which can track the seam line of narrow gap and which can control welding power has been developed. The joint profile of the narrow gap, with 250mm depth and 28mm width, can be captured by laser vision camera. The image is then processed for defining tracking positions of the torch during welding. Then, the real-time correction of lateral and vertical position of the torch can be done by the laser vision system. The adaptive control of welding conditions like welding Currents and welding speeds, can also be performed by the laser vision system, which cannot be done by conventional mechanical touch systems. The developed automation system will be adopted to reduce the idle time of welders, which happens frequently in conventional long welding processes, and to improve the reliability of the weld quality as well.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.25-30
• /
• 2009

In this paper, a full-digital capacitive sensor for touch key applications is proposed. The proposed circuit consists of two capacitive loads to measure and a resistor between the capacitive loads. As the method measures the delays of the resistor and two capacitive loads respectively, and obtains difference between the capacitive loads by subtracting the two delays, it can reduce the effects of changing of operating environment variables such as supplying voltage, temperature and humidity. Experimental results show the method has l.02pF resolution and can be applied to touch key applications.

• International Journal of Korean Welding Society
• /
• v.2 no.1
• /
• pp.45-51
• /
• 2002

In the multi-pass welding of pressure vessels or ships, the mechanical touch sensor system is generally used together with a manipulator to measure the gap and depth of the narrow gap to perform seam tracking. Unfortunately, such mechanical touch sensors may commit measuring errors caused by the deterioration of the measuring device. An automation system of narrow gap multi-pass welding using a laser vision system which can track the seam line of narrow gap and which can control welding power has been developed. The joint profile of the narrow gap, with 250mm depth and 28mm width, can be captured by laser vision camera. The image is then processed for defining tracking positions of the torch during welding. Then, the real-time correction of lateral and vertical position of the torch can be done by the laser vision system. The adaptive control of welding conditions like welding currents and welding speeds, can also be performed by the laser vision system, which cannot be done by conventional mechanical touch systems. The developed automation system will be adopted to reduce the idle time of welders, which happens frequently in conventional long welding processes, and to improve the reliability of the weld quality as well.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.100-105
• /
• 2002

In general, manufacturing error originated in bad material, machine tool defection, tool defection, and tool breakage. When the manufacturing process is stable, the error is come from the tool wear. In common on-machine measurement, teaching probe and touch sensor are widely used, however in this thesis the automatic tool compensation system using electric touch point measuring system is developed and evaluated, and effective operating is proposed.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.573-577
• /
• 2007

터치 센서를 이용한 휴대단말용 인터페이스가 다양하게 개발되면서 차세대 인터랙션 수단으로서 많은 주목을 받고 있지만, 버튼 인터페이스에 비해 오동작에 취약하고 터치 인터페이스만의 차별성을 확보하지 못하고 있는 실정이다. 본 논문에서는 터치 드래그 동작을 주요 인터랙션 수단으로 활용한 모바일 기기용 사용자 인터페이스를 개발하여 오동작을 최소화하고 사용자가 조작할 때 즐거움을 줄 수 있는 UI 요소로 활용할 수 있도록 하였다. 본 논문에서 개발한 터치 인터페이스는 기기의 내부/외부 방향의 스크롤 동작을 각각 drag-in/drag-out 동작으로 칭하고 이러한 드래그 동작을 응용 프로그램의 실행과 종료에 할당하였으며 터치 센서를 따라 움직이는 스크를 동작은 기존과 동일하게 일반적인 스크롤 행위를 지시하는데 적용하였다. 제안한 인터랙션 방법은 터치 센서의 형태에 따라 크게 두 가지 방식으로 구현하였다. 첫 번째 방법은 기기 스크린 외곽에 터치 센서를 이열(二列) 배치하여, 터치스크린을 사용하지 않고도 스크린 주변의 터치 센서를 활용한 drag-in/out 동작의 감지가 가능하도록 하였다. 두 번째 구현 방법은 정전용량형 터치 센서 IC를 활용해 터치 스크린 기능과 함께 스크린 주변의 기기 케이스의 일부까지도 사용자의 접촉을 감지할 수 있도록 하였다. 기존 저항 방식 터치 스크린과 달리 본 논문에서 활용한 방식은 스크린과 케이스에서 동시에 터치를 감지할 수 있으며, 다접점 감지 알고리즘의 개발로 두 개의 손가락을 이용한 다양한 터치 인터랙션으로 활용할 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.319-324
• /
• 2012

This paper introduces a 2-dimensional touch screen panel driver based on an improved capacitive sensing circuit. The improved capacitive sensing circuit based on charge pump can eliminate the remaining charges of the intermediate nodes, which may cause output voltage drift. The touch screen panel driver with mixed-mode circuits was built and simulated using Cadence Spectre. Verilog-A models the digital circuits effectively and enables them to interface with analog circuits easily. From the simulation results, we can verify the reliable operations of the simple structured touch screen panel driver based on the improved capacitive sensing circuit offering no voltage drift.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.3
• /
• pp.131-138
• /
• 2017

QR/NFC tags have been utilized in various fields like exhibition, museum, and so on, but they have a drawback that they are read-only fundamentally. We devise a novel device called a smart memory tag (below mem-tag) which is supplemented with the write function through combining a flash memory into a NFC tag. A mem-tag is composed of an NFC tag, an MCU, a flash memory, a bluetooth module, and a battery, and is inter-operating with smartphones via bluetooth communication. It can be used in a bulletin board to support writing replies and in a check-in service to verify the presence of the site. What matters is that users' inter-operations are borne to be asynchronous, which leads to the energy consumption to wait for users' actions. Sleep mechanisms and asynchronous MAC protocols used in ubiquotous sensor networks cannot avoid the consumption of battery. In this paper, we propose a touch and play scheme for minimizing the consumption of battery that the MCU wakes up and PLAY when a user TOUCH the mem-tag. We implemented the system to show that our scheme lets the mem-tag work 50 times longer than the sleep and wake-up scheme.

• Journal of Korea Game Society
• /
• v.9 no.5
• /
• pp.63-72
• /
• 2009

I-phone presented a new mobile control type by the introducing motion recognition sensor and that influenced on game application development so that led a lot of games using kinds of sensors. In this paper, we divided the game enjoyment into 5 factors for the embodiment of the sensor's influence direction on the enjoyment. We experimented two game, which have same content, different devices in using motion recognition sensor or not for clarifying the distinction between devices. As a experiment source game, we used Cooking Mama, as a experimental device, we used I-pod touch and NDS. This experiment shows a motion recognition sensor control's enjoyment is far superior to touch sensor. This sensor got high marks on every fun factors, stimulus, absorption, empathy, accomplishment and variation. Especially, stimulus and empathy showed great differences. In this case, we found the fact that extended communication between the gamer and the device can be fun.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.54-60
• /
• 2000

Research about tool condition monitoring has been done until now for product automation and unmaned system. But it is hard to apply it to the industrial field due to its cost and reliability. This paper presents the new method of tool wear measurement using Marpos gauge. This is a kind of touch sensor, so its cost is lower than vision system. And it is not affected by dust and illumination, which are important in vision system. This proposed method use tool clearance angle to measure flank wear. Experimental results compared with vision system shows that this method is available for tool condition monitoring system.