• Journal of agricultural medicine and community health
• /
• v.46 no.1
• /
• pp.1-11
• /
• 2021

Objectives: This research aimed to identify the level of perception, knowledge, preventive behavior, and factors affecting preventive behavior of patients with asthma and chronic obstructive pulmonary disease against particulate matter. Methods: This research was a descriptive survey research, and the subjects were chronic pulmonary disease patients over the age of 19 and under 80 who visited a university hospital in Daegu City. Data was collected by convenience sampling through structured self-administered questionnaire survey from December 2019 to January 2020, and a total of 212 copies were used for analysis. Results: Out of 212 total subjects, 112 were asthma patients (52.8%) and 100 were chronic obstructive pulmonary disease patients (47.2%). The average score (out of 10) of perception, knowledge and preventive behavior of patients with asthma for particulate matter was 7.92, 6.99, and 7.10, respectively, while those with chronic obstructive pulmonary disease scored 7.72, 6.24, and 6.80, respectively. The knowledge score was significantly higher in patients with asthma than those with chronic obstructive pulmonary disease (p=0.007). Factors affecting particulate matter preventive behavior were perception score, knowledge score, and age for asthma patients, and perception score for chronic obstructive pulmonary disease patients. Conclusions: As a result of the above, the factors relate to the preventive behavior of patients with asthma and chronic obstructive pulmonary disease were perception score, knowledge score, and age for asthma, and perception score for chronic obstructive pulmonary disease. Raising the level of particulate matter preventive behavior can prevent the deterioration of chronic pulmonary diseases caused by particulate matter, so the development of arbitration programs considering the characteristics of the patients according to the disease and continuous and repetitive education are required.

• Journal of the korean society of oceanography
• /
• v.31 no.2
• /
• pp.55-63
• /
• 1996

Distribution of suspended particulate matter, dissolved oxygen and major inorganic nutrients along a meridional section ($126^{\circ}$ 33' E) in the Cheju Strait is described along with the hydrographic and current data obtained during April 25-27, 1995. The current measurements was conducted using a vessel-mounted Acoustic Doppler Current Profiler (ADCP). Repeated coverage along an ADCP transect during 25 hours allows to calculate the daily mean along- and cross-strait currents. Measured material concentrations and the mean current speed were used to estimate the flux density (cencentration times current speed) of materials. Two types of depth distibution of flux densities were observed. for nitrate and suspended particulate matter, the depth distribution pattern of materials determines those of flux densities. However, flow patterns determine those of flux densities for dissolved oxygen, phosphate and silicic acid. The total along-strait water volume transport is about 0.3 Sv (1Sv $10^{6}$ $m^{3}/s^{-1}$). The total along-strait material transports are estimated to be 3.1 $${\times} $10^{5}$ $g/s^{-1},$ 2.4 ${\times}$ $10^{6}\;g/s^{-1},$ 7.I ${\times}$ $10^{2}\;mol/s^{-1},$ 3.I ${\times}$ $10\;mol/s^{-1},$ 1.7 ${\times}$ $10^{3}\;mol/s^{-1}$ for suspended particulate matter, dissolved oxygen, nitrate ion, silicic acid and phosphate ion, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1252-1258
• /
• 2022

The exhaust gas from the marine engines include a quantity of water vapor and particulate matter. The total particulate matter includes filterable particulate matter (FPM) and condensable particulate matter (CPM) that condense after releasing into the atmosphere. The portion of CPM is higher than that of FPM that is removable through the filter before discharging. An experimental setup for waste heat and water recovery and removal of CPM in the exhaust gas was tested using an industrial gas boiler in the laboratory. The water and CPM in the exhaust gas were removed through the first stage of cooling method and further removed through the second stage of absorption method. The efficiencies of water recovery were 73% after the first stage of cooling method and 90% after the second stage of absorption method. At the same time, the CPM was removed by 80-90% through the processes. The waste heat recovered could be used to process heat, and the water recovered could be used to process water in the ship. Furthermore, the CPM, which is a major source of the particulate matter but not subject to administrative regulation, could be removed effectively.

• Journal of Environmental Health Sciences
• /
• v.47 no.3
• /
• pp.259-266
• /
• 2021

Objectives: This study was conducted to identify the emissions characteristics of total particulate matter (TPM), fine dust (PM₁₀, PM_2.5), and gaseous pollutants (SOx, NOx) in iron and steel manufacturing facilities in order to investigate emissions factors suitable for domestic conditions. Methods: Total particulate matter (TPM), fine dust (PM₁₀, PM_2.5), and gas phase materials were investigated at the outlet of electric arc furnace facilities using a cyclone sampling machine and a gas analyzer. Results: The concentrations of TPM ranged from 1.64 to 3.14 mg/Sm³ and the average was 2.47 mg/Sm³. Particulate matter 10 (PM₁₀) averaged 1.49 mg/Sm³ with a range of 0.92 to 1.99 mg/Sm³, and the resulting ratio of PM₁₀ to TPM was around 60 percent. PM_2.5/PM₁₀ ranged from 33.7 to 47.9% and averaged 41.6%. Sulfur oxides (SOx) were not detected, and nitrogen oxides (NOx) averaged 6.8 ppm in the range of 5.50 to 8.67 ppm. TPM emission coefficients per product output were in the range of 0.60 to 1.26 g/kg, 0.13 to 0.79 g/kg for PM₁₀ and 0.12 to 0.36 g/kg for PM_2.5, and showed many differences from the emissions coefficients previously announced. An emissions coefficient for NOx is not currently included in the domestic notices, but the results were calculated to be 0.42 g/kg per product output. Conclusions: Investigation and research on emissions coefficients that can reflect the characteristics of various facilities in Korea should be conducted continuously, and the determination and application of unique emissions coefficients that are more suitable for domestic conditions are needed.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.99-105
• /
• 2022

Public attention to the indoor environment of underground subway stations, which is a representative multi-use facility, has been increasing along with the increase in indoor activities. In underground stations, fine iron oxide, which affects the health of users, is generated because of the friction between wheels and rails. Among particulate pollutant reduction technologies, plants have been considered as a non-chemical air purification method, and their effects in reducing certain chemical species have been identified in previous studies. The present study aimed to derive the total quantitative and qualitative reduction effects of a bio-filter system comprising air purifying plants, installed in an underground subway station. The experiment proceeded in two ways. First, PM(particulate matter) reduction effect by vegetation biofilter was monitored with the IAQ(indoor air quality) station. In addition, chemical speciation analysis conducted on the samples collected from the experimental and control areas where plants and irrigation using SEM-EDS(scanning electron microscopy-energy dispersive X-ray spectroscopy). This study confirmed the effect of the vegetation bio-filter system in reducing the accumulation of particulate pollutants and transition and other metals that are harmful to the human body.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.581-586
• /
• 2010

Generally, electrokinetic potential has been considered as an intensive property. In other words, electrokinetic potential is not affected by the amount of particulate matter. Montmorillonite, one of essential inorganic matter, was chosen to measure electrokinetic potential. The result of electrokinetic potential measuring experiment showed that the value observed to decrease as the amount of montmorillonite clay increased. This is due to the fact that total ions that adsorbed per unit mass were decreased as the amount of montmorillonite was increased. As a result, electrokinetic potential is considered as an extensive property. By using these results, total interaction energy of suspension was also checked, and revealed that total interaction energy was decreased as the amount of montmorillonite increased.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.194-201
• /
• 2015

Objectives: The purpose of this study is to assess the exposure level to dust and airborne microorganisms among employed workers in a clothing shopping center. Materials and Methods: On-site investigation of a clothing shopping center was performed between October and November 2012. The hazardous substances measured in this study are particulate matter(Total dust, respirable dust) and airborne microorganisms (Total airborne bacteria, total airborne fungi). Results: The highest geometric mean levels of particulate matter(total dust, respirable dust) for personal sampling were $1.735(SD:0.883)mg/m^3$ for total dust and $0.0711(SD:0.008)mg/m^3$ for respirable dust, respectively. Those for area sampling were $0.625(SD:0.091)mg/m^3$ for total dust and $0.0718(SD:0.012)mg/m^3$ for respirable dust, respectively. The highest geometric averaged concentrations of airborne microorganisms(Total airborne bacteria, total airborne fungi) were detected at $1,181(SD:105)cfu/m^3$ for total airborne bacteria and $683(SD:114)cfu/m^3$ for total airborne fungi, respectively. Concentrations of particulate matters and airborne microorganism in clothes shopping center did not correlate significantly with environmental factors such as temperature or relative humidity. Conclusions: Exposure levelshave not been established for service workers. Thus, health risk assessment for this group is very difficult. Health guidelines for service workers should be established as soon as possible.

• Environmental Engineering Research
• /
• v.23 no.2
• /
• pp.143-149
• /
• 2018

Air quality conditions and pollution status have been evaluated in the industrial area between Sharjah and Ajman border in UAE. Daily concentrations of $O_3$, CO, $NO_2$, $SO_2$, $PM_{2.5}$, $PM_{10}$, Total Volatile Organic Compounds (TVOC) and Total Suspended Particulate (TSP) have been monitored from Sept. 2015 to April 2016. The monthly average concentrations of $O_3$, CO, $NO_2$, $SO_2$, TVOC were within the UAE ambient air quality standards during the survey period. However, $PM_{10}$ and TSP levels exceeded the recommended limits in Sept. 2015, Oct. 2015 and March 2016. Temporal variations in air quality parameters showed highest levels in March 2016 for $PM_{2.5}$, $PM_{10}$, $NO_2$, TVOC and TSP, whereas $O_3$, $SO_2$ and CO showed relatively low values in this month. $PM_{2.5}$ levels in ambient air were above the EPA guideline of $35{\mu}g/m^3$ in all months. $PM_{2.5}$ was the critical ambient air pollutant with Index for Pollutant ($I_p$) values varying from 103-209, indicating Air Quality Index categories of unhealthy for sensitive groups (62.5%) to unhealthy (25%) to very unhealthy (12.5%). The $I_p$ average values of $PM_{2.5}$ decreased from Sept. 2015 to reach lowest value in Dec. 2015 before increasing gradually, peaking in March 2016. These results suggest the potential health risks associated with $PM_{2.5}$ is low in winter, where the prevailing meteorological conditions of lower temperatures, higher humidity, higher wind speed reduced particulate matter. The results revealed the industrial area is impacted by anthropogenic and natural sources of particulate matter.

• Tuberculosis and Respiratory Diseases
• /
• v.83 no.2
• /
• pp.116-121
• /
• 2020

Particulate matter (PM) is suspended dust that has a diameter of <10 ㎛ and can be inhaled by humans and deposited in the lungs, particularly the alveoli. Recent studies have shown that PM has an adverse effect on respiratory diseases. The aim of this article is to review respiratory diseases associated with PM. According to existing studies, PM is associated with chronic obstructive pulmonary disease, bronchial asthma, and several other respiratory diseases and increases the mortality rates of these diseases. Moreover, increased exposure in the high concentration of atmospheric PM is associated with the development of lung cancer. The most simple and common way to protect an individual from airborne PM is to wear a face mask that filters out PM. In areas of high concentration PM, it is recommended to wear a face mask to minimize the exposure to PM. However, the use of N95 or KF94 masks can interfere with respiration in patients with chronic respiratory diseases who exhibit low pulmonary function, leading to an increased risk of respiratory failure. Conclusionally, reduction of the total amount of PM is considered to be important factor and strengthening the national warning notification system to vulnerable patients and proper early management of exacerbated patients will be needed in the future.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.5
• /
• pp.474-481
• /
• 2023

This paper is an experimental study on the optimal operating conditions of direct charging type electrospray for particulate matter collection. To perform the research, a direct charging type electrospray visualization system was configured to photograph the spray shape of microdroplets, and experiments were performed with varying electrode distance, flow rate, and applied voltage, which are the main factors affecting the particulate matter collection efficacy. Through image processing, the total number of microdroplets according to each condition was analyzed, and the number of microdroplets with a diameter of 1.5 mm or less was confirmed. In addition, by calculating the number of microdroplets per power consumption according to the applied voltage, the optimal operating conditions were derived in terms of energy consumption efficacy, and the microdroplet size distribution was analyzed under the optimal operating conditions. As a result of the experiment, it was confirmed that the optimal operating condition was at a flow rate of 10 mL/min and a voltage of -20 kV in case of 5 mm electrode distance, and at a flow rate of 15 mL/min and a voltage of -30 kV in case of 100 mm electrode distance.