• Archives of Plastic Surgery
• /
• v.32 no.1
• /
• pp.60-66
• /
• 2005

Total auricular reconstruction with autogenous tissue remains one of the greatest technical challenges for reconstructive plastic surgeons because of the ear's complex morphology with delicately convoluted cartilages and very thin skin. In a successfully created ear, a natural three-dimensional illusion visualized from the patient's profile, frontal, and posterior views is crucial. Accordingly ear framework should have adequate lateral aspect as well as suitable frontal aspect even before being lifted to this purpose. For this goal, rib cartilage should be harvested from three-dimensionally adequate area. It is the most essential point in framework fabrication that the baseblock should have semi-cup curvature via multiple parallel cuts made on its medial surface. Between January 1999 and May 2003, we performed 29 cases of total ear reconstruction with autogenous rib cartilage graft using this scoring technique and obtained satisfactory results, which showed more natural appearance visualized from the patient's profile, frontal, and posterior views.

• Structural Engineering and Mechanics
• /
• v.55 no.2
• /
• pp.435-459
• /
• 2015

Parametric resonance of shear deformable composite skew plates subjected to non-uniform (parabolic) and linearly varying periodic edge loading is studied for different boundary conditions. The skew plate structural model is based on higher order shear deformation theory (HSDT), which accurately predicts the numerical results for thick skew plate. The total energy functional is derived for the skew plates from total potential energy and kinetic energy of the plate. The strain energy which is the part of total potential energy contains membrane energy, bending energy, additional bending energy due to additional change in curvature and shear energy due to shear deformation, respectively. The total energy functional is solved using Rayleigh-Ritz method in conjunction with boundary characteristics orthonormal polynomials (BCOPs) functions. The orthonormal polynomials are generated for unit square domain using Gram-Schmidt orthogonalization process. Bolotin method is followed to obtain the boundaries of parametric resonance region with higher order approximation. These boundaries are traced by the periodic solution of Mathieu-Hill equations with period T and 2T. Effect of various parameters like skew angle, span-to-thickness ratio, aspect ratio, boundary conditions, static load factor on parametric resonance of skew plate have been investigated. The investigation also includes influence of different types of linearly varying loading and parabolically varying bi-axial loading.

• Journal of Acupuncture Research
• /
• v.27 no.2
• /
• pp.97-104
• /
• 2010

Objectives : The authors aimed to determine the presence of relationships between cervical pain and cervical curvature, lumbar curvature, sacral slope and sagittal spinal balance. Methods : Medical records of outpatients who made their first visits to the Department of Acupuncture and Moxibustion in the Spine center at Kyung Hee East-West Neo Medical Center between September 1, 2008 and October 31, 2009 were evaluated. A total of 50 patients visiting within the time period had visited with a chief complaint of cervical pain, and had lateral entire spine X-rays taken. After excluding patients with previous spine operations, 46 patients were selected for the final analysis. The cervical lordotic angle(CLA), lumbar lordotic angle(LLA), Ferguson's angle(FA), and sagittal vertical axis(SVA) were measured on the lateral entire spine X-ray cuts, and the relationships between these values and patient gender, age, chief complaint, and duration of symptoms were assessed. Results : No significant difference was found in relationships between gender and measured values. SVA showed statistically significant correlation between age, but CLA, LLA, and FA was not. There was a significant difference in SVA between patients with only cervical pain and those with both cervical pain and low back pain. Patients with a duration of symptoms longer than 6 months showed a statistically significant difference in SVA with those who had shorter symptoms. Correlation analysis between measured values was statistically significant only between LLA and FA. Conclusions : Evaluation and treatment of sagittal imbalance should be considered in patients presenting with cervical pain if symptoms have persisted for over 6 months or have accompanying low back pain.

• Restorative Dentistry and Endodontics
• /
• v.30 no.4
• /
• pp.294-302
• /
• 2005

The purpose of this study was to evaluate the canal configuration after shaping by ProFile. ProTaper and K-Flexofile in simulated resin canals with different angles of curvature. Three types of instruments were used: ProFile. ProTaper. K-Flexofile. Simulated root canals. which were made of epoxy resin. were prepared by ProFile. ProTaper with rotary instrument using a crown-down pressureless technique. and hand instrumentation was performed by K-Flexofile using a step-back technique. All simulated. canals were prepared up to size 25 file at end-point of preparation. Pre and post instrumentation images were recorded with Scanner. Assessment of canal shape was completed with Image Analysis program. Measurements were made at 1. 2. 3. 4. 5. 6. 7. 8. 9 and 10mm from the apex. At each level. outer canal width. inner canal width. total canal width. and amount of transportation from original axis were recorded. Instrument deformation and fracture were recorded. Data were analyzed by means of one-way ANOVA analysis of variance and the Sheffe's test. The result was that ProFile and ProTaper maintain original canal shape regardless of the increase of angle of curvature than K-Flexofile. ProFile show significantly less canal transportation and maintained original canal shape better than ProTaper.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1791-1796
• /
• 2005

Semi-shield tunneling is one of the propulsion construction methods used to lay pipes underground between two pits named 'entrance' and 'destination', respectively. Usually a simple composition, such as 'a fiducial target at the entrance+a total station (TS)+a target on the machine', is used to confirm the planned course. However, unavoidable curved sections are present in small-sized pipe lines, which are laid after implementation of a road system, for public works such as waterworks, sewer, electrical power, and gas and communication networks. Therefore, if the planned course has a curved section, it is difficult to survey the course with the abovementioned simple composition. This difficulty could be solved by using the multiple total stations (MTS), which attaches the cross type linear LED target to oneself. The MTS are disposed to where each TS can detect the LED target at the other TS or the base point or the machine. And the accurate relative positions between each MTS and target are calculated from measured data. This research proposes the relative and absolute coordinate calculation algorithm by using three MTS to measure a curved course with 20m curvature at 30m maximum distance, and verifies the algorithm experimentally.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.3
• /
• pp.231-236
• /
• 2015

Investigations into cavity flows have been conducted for decades now, most of them being about zero-pressure-gradient flows entering a cavity on a straight wall. However, the flow over curved walls in real-life situations has not been fully investigated. As cavity flows on curved walls exert centrifugal force, these walls are likely to possess different features from straight walls. To verify this possibility, this study investigated cavity flows on curved walls. Using numerical method, the effect of two variables, namely, radius of curvature on a curved wall and inlet Mach number, were investigated for subsonic and supersonic cavity flows. The result demonstrates that the value of the peak pressure generated inside the cavity increases with the decrease in the radius of curvature on a curved wall or an increase in the inlet Mach number. The total pressure loss in the cavity also results in an increase in the cavity drag.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.633-638
• /
• 2010

Purpose: Orbital bone is one of the most complex bones in the human body. When the patient has a fracture of the orbital bone, it is difficult for the surgeon to restore the fractured orbital bone to normal anatomic curvature because the orbital bone has complex curvature. We developed a rapid prototyping model based on a mirror image of the patient's 3D-CT (3 dimensional computed tomography) for accurate reduction of the fractured orbital wall. Methods: A total of 7 cases of large orbital wall fracture recieved absorbable plate prefabrication using rapid prototyping model during surgery and had the manufactured plate inserted in the fracture site. Results: There was no significant postoperative complication. One patient had persistent diplopia, but it was resolved completely after 5 weeks. Enophthalmos was improved in all patients. Conclusion: With long term follow-up, this new method of orbital wall reduction proved to be accurate, efficient and cost-effective, and we recommend this method for difficult large orbital wall fracture operations.

• Journal of Korean Neurosurgical Society
• /
• v.44 no.2
• /
• pp.78-83
• /
• 2008

Objective : To understand the anatomic characteristics of the aortic arch (AA) and its major branches to build a foundation toward performing endovascular surgery safely. Methods : A total of 25 formalin fixed Korean adult cadavers were used. The authors investigated : anatomical variations of the AA and its major branches; curvature of the AA; distance from the mid-vertebrae line to the origin of the major branches; distances from the origin of the major branches of AA to the origin of its distal branches; and the angle of the three major branches, the brachiocephalic trunk (BCT), the left common carotid artery (LCCA) and the left subclavian artery (LSCA) arising from AA. Results : The three major branches directly originated from AA in 21 (84%) of the cadavers. In two (8%) of remaining four cadavers. orifice of LCCA was slightly above the stem of BCT. In remaining two (8%) cadavers, the left vertebral artery (LVA) was directly originated from AA. Average angle of AA curvature to the coronal plane was 62.2 degrees. BCT originated 0.92 mm on the right of the mid-vertebrae line. LCCA and LSCA originated from 12.3 mm and 22.8 mm on the left of the mid-vertebrae line. Mean distance from the origin of the BCT to the origin of the RCCA was 32.5 mm. Mean distance from the origin of the LSCA to the origin of the LVA was 33.8 mm. Average angles at which the major branches arise from the AA were 65.3, 46.9 and 63.8 degrees. Conclusion : This study may provides a basic anatomical information to catheterize AA and its branches for safely performing endovascular surgery.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.6
• /
• pp.901-910
• /
• 2002

This study is to classify somatotypes of the upper class boys in elementary school. The study is conducted through anthoropometric measurements and photometric measurements. The subjects are 320 boys in the age group of 10 to 11 years old. The following conclusions are drawn from this study. 1. The height items are increased along with age increase. The increases in the factors, which specify vertical sizes such as height and length, are a little larger than those of breadth, depth, and girth, which specify ; horizontal sizes. 2. The factor analysis on anthropometric measurements and photometric measurements reveals five somatic composition factors and those factors comprised 79.60% of total variance. 3. The torso shapes of the upper class boys in elementary school are classified into three categories. The first type is taller and heavier than the average elementary school upper class boys and has the highest rising shoulders. The shape of the back is about average and the chest is developed above average. The curvature of the lower back is gentle and lower abdomen protrudes the most of the three types. The second type is tall and slightly heavier than average and shoulders are raised a little. The shoulder blades protrude about average and the curvature of lower back is the most developed of all. The cheat is developed about average and the abdomen is a little protruding. The third type is the most common with the smallest height of the three and skinny with dropped shoulders. The chest is somewhat flat and the shoulder blades protrude about average.

• The korean journal of orthodontics
• /
• v.47 no.2
• /
• pp.87-99
• /
• 2017

Objective: The aims of this study were to measure and compare the facial dimensions of the Miss Korea pageant contestants and a selected group of women from the general population by using three-dimensional (3D) image analysis, as well as to compare various facial ratios to the golden ratio within each group. Methods: Three-dimensional images of 52 Miss Korea pageant contestants (MK group) and 41 young female adults selected from the general population (GP group) were acquired. Fifty-four variables and ratios were measured and calculated. Intergroup comparisons were performed using multivariate analysis of variance. Results: Compared to the GP group, the MK group showed greater total facial height and eye width, lesser lower-facial height, and lesser facial, lower-facial, and nasal widths. Moreover, compared to the GP group, the MK group had more protruded noses with greater nasolabial angle, greater vertical curvature of the foreheads, lesser horizontal curvature of the cheek, and lesser lower-lip-and-chin volume. Conclusions: The MK group had longer faces but smaller lower lips and chins than did the GP group. The golden ratio was not matching the current facial esthetic standards. These data might be beneficial for treatment planning of patients undergoing orthognathic and plastic surgeries.