• 한국전산구조공학회논문집
• /
• 제17권4호
• /
• pp.375-387
• /
• 2004

팻취 보강된 철근콘크리트 구조물 해석을 위한 p-version 비선형 유한요소 모델이 제시되었다. 이방성 적층평판이론에 기초를 둔 제안된 모델은 Total Lagrangian기법에 기초한 von Karman의 대변형-소변형률 이론과 증분소성이론(incremental theory of plasticity)을 적용하였다. 콘크리트의 경화법칙(hardening rule)과 그에 따른 파괴기준을 고려하고, 단부 계면 층분리 모델(plate-end interfacial debonding model) 즉, 보강판 끝 부분에서의 콘크리트 탈락에 대한 기준으로서 Oehlers Model과 Raoof and Zhang Model을 사용하였다. 콘크리트는 두께 방향으로 층상화기법(layered model)이 이용되며, 철근과 보강판은 환산층(smeared reinforcing layer)으로 계산되도록 하였다 적분형 르장드르 다항식이 형상함수로 사용되며, 절점에서의 응력값 산출을 위해 Gauss Lobatto 수치적분법을 사용하였다. 본 연구의 목적은 p-version 유한요소법을 사용하여 RC구조물에 대한 수피해의 정확도 및 모델의 단순성을 높인 수 있도록 하였다. 따라서, 철근과 콘크리트모델에 대한 이론적 근거는 기존의 연구문헌에 근거를 두었으며, 수치해석의 적정성은 팻취 보강된 RC보와 슬래브에 대한 문헌의 실험치 및 해석치와 비교 분석되었다.

• 대한조선학회논문집
• /
• 제28권2호
• /
• pp.307-317
• /
• 1991

선체구조 및 해양구조물의 기본 구조요소로 사용되는 편심으로 보강된 평판이나 쉘 수조물의 기하하적 비선형 해석에 관한 논문으로서 사용된 유한요소는 격하 쉘요소와 편심된 격하보요소이며 total Lagrange(T.L.)수식과 updated Lagrange(U.L.)수식으로 정식화 하였다. 편심된 보강평판의 비선형 해석에서 사용된 모델은 보강재의 이상화 방법에 따라 평판과 보강재를 격하 쉘요소로 이상화한 모델과 평판은 격하 쉘요소로하고 보강재는 편심된 격하 보요소로 이상화한 모델로 각각 구분하여 비선형 해석을 수행하였으며 해석과정에서 편심 보강평판의 임계하중을 구하고 좌굴 후 비선형 거동을 조사하였다. 해석된 임계 좌굴하중은 선급에서 규정하고 있는 방식의 오일러의 좌굴하중값 보다는 낮게 조사되었다.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.111-120
• /
• 1998

This paper is the first one of two-parted research efforts focusing on the modeling of rubber pad forming process. The rubber pad, driven by the pressurized fluid during the forming process, pushes the sheet metal to solid tool half and forms a part to final shape. In this part of the paper, a numerical procedure for the FE analysis of the rubber pad deformation is presented. The developed three-dimensional FE model is based on the total Lagrangian description of rubber maerial characterized by nearly incompressible hyper-elastic behavior under a large deformation assumption. Validity of the model as well as effects of different algorithms corresponding to incompresibility constraints and time integration methods on numerical solution responses are also demonstrated.

• Steel and Composite Structures
• /
• 제27권5호
• /
• pp.567-576
• /
• 2018

The objective of this work is to analyze large deflections of a fiber reinforced composite cantilever beam under point loads. In the solution of the problem, finite element method is used in conjunction with two dimensional (2-D) continuum model. It is known that large deflection problems are geometrically nonlinear problems. The considered non-linear problem is solved considering the total Lagrangian approach with Newton-Raphson iteration method. In the numerical results, the effects of the volume fraction and orientation angles of the fibre on the large deflections of the composite beam are examined and discussed. Also, the difference between the geometrically linear and nonlinear analysis of fiber reinforced composite beam is investigated in detail.

• Structural Engineering and Mechanics
• /
• 제67권4호
• /
• pp.337-346
• /
• 2018

The purpose of this study is to investigate thermal post-buckling analysis of a laminated composite beam subjected under uniform temperature rising with temperature dependent physical properties. The beam is pinned at both ends and immovable ends. Under temperature rising, thermal buckling and post-buckling phenomena occurs with immovable ends of the beam. In the nonlinear kinematic model of the post-buckling problem, total Lagrangian approach is used in conjunction with the Timoshenko beam theory. Also, material properties of the laminated composite beam are temperature dependent: that is the coefficients of the governing equations are not constant. In the solution of the nonlinear problem, incremental displacement-based finite element method is used with Newton-Raphson iteration method. The effects of the fibber orientation angles, the stacking sequence of laminates and temperature rising on the post-buckling deflections, configurations and critical buckling temperatures of the composite laminated beam are illustrated and discussed in the numerical results. Also, the differences between temperature dependent and independent physical properties are investigated for post-buckling responses of laminated composite beams.

• Wind and Structures
• /
• 제27권1호
• /
• pp.59-70
• /
• 2018

In this paper, geometrically non-linear analysis of a functionally graded simple supported beam is investigated with porosity effect. The material properties of the beam are assumed to vary though height direction according to a prescribed power-law distributions with different porosity models. In the nonlinear kinematic model of the beam, the total Lagrangian approach is used within Timoshenko beam theory. In the solution of the nonlinear problem, the finite element method is used in conjunction with the Newton-Raphson method. In the study, the effects of material distribution such as power-law exponents, porosity coefficients, nonlinear effects on the static behavior of functionally graded beams are examined and discussed with porosity effects. The difference between the geometrically linear and nonlinear analysis of functionally graded porous beam is investigated in detail. Also, the effects of the different porosity models on the functionally graded beams are investigated both linear and nonlinear cases.

• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.433-441
• /
• 2019

In this paper, geometrically nonlinear static analysis of laminated composite beams is investigated under hygrothermal effect. In the solution of problem, the finite element method is used within the first shear beam theory. Total Lagrangian approach is used nonlinear kinematic model. The geometrically nonlinear formulations are developed for the laminated beams with hygro-thermal effects. In the nonlinear solution of the problem, the Newton-Raphson method is used with incremental displacement. In order to verify of obtained formulations, a comparison study is performed. The effects of the fiber orientation angles, the stacking sequence of laminates, temperature rising and moisture changes on the nonlinear static displacements and configurations of the composite laminated beam are investigated in the numerical results.

• Computers and Concrete
• /
• 제15권3호
• /
• pp.373-389
• /
• 2015

The development of a finite element model for the geometric and material nonlinear analysis of bonded prestressed concrete continuous beams is presented. The nonlinear geometric effect is introduced by the coupling of axial and flexural fields. A layered approach is applied so as to consider different material properties across the depth of a cross section. The proposed method of analysis is formulated based on the Euler-Bernoulli beam theory. According to the total Lagrangian description, the constructed stiffness matrix consists of three components, namely, the material stiffness matrix reflecting the nonlinear material effect, the geometric stiffness matrix reflecting the nonlinear geometric effect and the large displacement stiffness matrix reflecting the large displacement effect. The analysis is capable of predicting the nonlinear behaviour of bonded prestressed concrete continuous beams over the entire loading stage up to failure. Some numerical examples are presented to demonstrate the validity and applicability of the proposed model.

• 유변학
• /
• 제11권1호
• /
• pp.18-27
• /
• 1999

본 연구에서는 3차원 열성형 공정 알고리듬과 이에 membrane approximation을 도입한 근사적인 알고리듬을 개발하였고, 이 알고리듬을 이용하여 몇몇 열성형계에 대한 수치모사를 수행하여 그 결과를 비교 분석하였다. 3차원 알고리듬의 경우에는 구성한 유한요소 평형 방정식에 벌칙함수를 도입하여 비압축성 조건을 만족시켜 해를 얻었으며, membrane approximation을 도입한 알고리듬의 경우에는 두께 방향의 응력을 무시하여 구성한 방정식으로부터 해를 얻었다. 구성방정식은 2nd Piola-Kirchhoff 응력 텐서와 Cauchy-Green 변형 텐서를 사용하여 표현하였고 수지의 물질 모델식으로는 2항의 Mooney-Rivlin 모델을 사용하였으며, total Lagrangian coordinate를 도입하여 지배방정식을 유한요소화함으로써 알고리듬을 구성하였다. 대상계로 선정한 사각평판 수지의 자유 부풀림 거동과 금형이 있는 경우에서의 수지의 부풀림 거동을 3차원 알고리듬과 membrane approximation 알고리듬을 각각 이용하여 분석하였으며 3차원 알고리듬의 경우 clamping 부분의 경계조건을 달리하여 결과를 비교하였다. 금형이 있는 계에 대해서는 slip 경계조건과 no-slip 경계조건을 각각 부여하여 수치모사를 수행, 수지의 변형거동과 응력분포를 비교 분석하였으며, 두께를 달리 한 수지에 대해 두께 방향의 응력을 비교 분석함으로써 membrane approximation 알고리듬의 한계에 대하여 논하였다. 한편 수지 온도 변화에 따른 성형품의 두께 분포의 변화를 살펴보기 위하여 ABS 수지를 대상으로 하여 $137.8^{\circ}C$에서 $171.1^{\circ}C$사이의 온도에서 수행한 인장실험 데이터를 수치모사에 사용하였다. 그 결과 수지의 온도가 높을수록 두께의 표준편차가감소하여 균일한 두께 분포를 얻을 수 있음을 확인하였고 이는 수지의 흐름성이 증가함으로써 나타나는 현상으로 해석할 수 있다.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.117-126
• /
• 1998

For investigating rubber pad sheet metal forming process, the rubber pad deformation characteristics as well as the contact problem of rubber pad-sheet metal has been analyzed. In this paper, the behavior of the rubber deformation is represented by hyper-elastic constitutive relations based on a generalized Mooney-Rivlin model. Finite element procedures for the two-dimensional responses, employing total Lagrangian formulations are implemented in an implicit form. The volumetric incompressibility condition of the rubber deformation is included in the formulation by using penalty method. The sheet metal is characterized by elasto-plastic material with strain hardening effect and analyzed by a commercial code. The contact procedure and interface program between rubber pad and sheet metal are implemented. Inflation experiment of circular rubber pad identifies the behaviour of the rubber pad deformation during the process. The various form dies and scaled down apparatus of the rubber-pad forming process are fabricated for simulating realistic forming process. The obtaining experimental data and FEM solutions were compared. The numerical solutions illustrate fair agreement with experimental results. The forming pressure distribution according to the dimensions of sheet metal and rubber pads, various rubber models and rubber material are also compared and discussed.