• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권2호
• /
• pp.215-221
• /
• 2014

To satisfy the high voltage direct current (HVDC) grid connection demand for wind power generation system, a novel topology and control strategy of HVDC grid connection for open-winding permanent magnet synchronous generator (PMSG) based wind power generation system is proposed, in which two generator-side converter and two isolated DC/DC converters are used to transmit the wind energy captured by open winding PMSG to HVDC grid. By deducing the mathematic model of open winding PMSG, the vector control technique, position sensorless operation, and space vector modulation strategy is applied to implement the stable generation operation of PMSG. Finally, the simulation model based on MATLAB is built to validate the availability of the proposed control strategy.

• International journal of advanced smart convergence
• /
• 제7권2호
• /
• pp.22-32
• /
• 2018

In VANET, frequent movement of nodes causes dynamic changes of the network topology. Therefore the routing protocol, which is stable to effectively respond the changes of the network topology, is required. Moreover, the existing cluster-based routing protocol, that is the hybrid approach, has routing delay due to the frequent re-electing of the cluster header. In addition, the routing table of CBRP has only one hop distant neighbor nodes. PCBRP (Paired CBRP), proposed in this paper, ties two clusters in one pair of clusters to make longer radius. Then the pair of the cluster headers manages and operates corresponding member nodes. In the current CBRP, when the cluster header leaves the cluster the delay, due to the re-electing a header, should be occurred. However, in PCBRP, another cluster header of the paired cluster takes the role instead of the left cluster header. This means that this method reduces the routing delay. Concurrently, PCBRP reduces the delay when routing nodes in the paired cluster internally. Therefore PCBRP shows improved total delay of the network and improved performance due to the reduced routing overhead.

• Advances in Computational Design
• /
• 제2권3호
• /
• pp.195-210
• /
• 2017

Simultaneous optimization of trusses which concurrently takes into account design variables related to the size, shape and topology of the structure is recognized as highly complex optimization problems. In this class of optimization problems, it is possible to encounter several unstable mechanisms throughout the solution process. However, to obtain a feasible solution, these unstable mechanisms somehow should be rejected from the set of candidate solutions. This study proposes triangular unit based method (TUBM) instead of ground structure method, which is conventionally used in the topology optimization, to decrease the complexity of search space of simultaneous optimization of the planar truss structures. TUBM considers stability of the triangular units for 2 dimensional truss systems. In addition, integrated particle swarm optimizer (iPSO) strengthened with robust technique so called improved fly-back mechanism is employed as the optimizer tool to obtain the solution for these class of problems. The results obtained in this study show the applicability and efficiency of the TUBM combined with iPSO for the simultaneous optimization of planar truss structures.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1029-1034
• /
• 2004

Recent engineering process requires fast development and manufacturing of the products. This paper mainly discusses the process of rapid product development (RPD) from the reverse engineering to the optimal design. A laser scanning system scans a product and the efficient data processing method reduces the scanned point data. The reduced (scanned) points model is transformed to a finite element model without the construction of a CAD model. Since CAD modeling is a time-consuming work, skipping this step can save much time. This FE model is updated from the result based on the structural characteristics from modal test of the real model. For FE model updating, Response Surface Method is adopted. Finally, the updated FE model is optimized using the reliability-based topology optimization, which is developed recently. All these processes are applied to the design of an upper part model of a cellular phone.

• Structural Engineering and Mechanics
• /
• 제73권4호
• /
• pp.463-479
• /
• 2020

This paper is aimed to address a simultaneous optimization of the size, shape, and topology of steel lattice towers through a combination of the radial basis function (RBF) neural networks and the artificial bee colony (ABC) metaheuristic algorithm to reduce the computational time because mere metaheuristic optimization algorithms require much time for calculations. To verify the results, use has been made of the CIGRE Tower and a 132 kV transmission towers as numerical examples both based on the design requirements of the ASCE10-97, and the size, shape, and topology have been optimized (in both cases) once by the RBF neural network and once by the MSTOWER analyzer. A comparison of the results shows that the neural network-based method has been able to yield acceptable results through much less computational time.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.676-690
• /
• 2019

This paper presents a switched capacitor (SC) based bidirectional dc-dc converter topology for high voltage gain applications. The proposed converter is able to operate with multiple integral voltage conversion ratios based on user input. The architecture of a user-friendly, inductor-less multi-voltage-gain bidirectional dc-dc converter is proposed in this study. The inductor-less or magnetic-less design of the proposed converter makes it effective in higher temperature applications. Furthermore, the proposed converter has a reduced component count and lower voltage stress across its switches and capacitors when compared to existing SC converters. An output impedance analysis of the proposed converter is presented and compared with popular existing SC converters. The proposed converter is simulated in the OrCAD PSpice environment and the obtained results are presented. A 200 W hardware prototype of the proposed SC converter has been developed. Experimental results are presented to validate the efficacy of the proposed converter.

• 대한기계학회논문집B
• /
• 제37권4호
• /
• pp.323-329
• /
• 2013

본 연구에서는 나뭇잎 그물맥 구조를 시뮬레이션하기 위해 잎 그물맥을 상 하 보강 박막판과 비압축성 유체가 흐르는 중간층 구조로 모델링하여 다중물리 현상으로 간주하고, 위상 최적화법을 다중물리 설계영역에 적용하였다. Mindlin-Reissner 판 모델에 기인한 횡방향 전단잠금 문제를 해결하기 위해 P1 비적합 요소와 선택 감소 적분법을 이용하였다. 다시-스토크스 유체 유동 채널에 대해 최적설계법을 적용하여 유동 시스템의 다중물리 모델을 해석하였으며, 잎의 그물맥 시뮬레이션을 수행하였다. 계산된 최적형상을 잎의 자연 그물 맥 패턴과 비교하였으며 비슷한 형상을 얻었다. 이와 같은 학제간 연구를 통해 나무 잎 그물맥 시스템을 이해할 수 있는 계기가 될 것으로 사료된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권5호
• /
• pp.1303-1315
• /
• 2012

In the draft of the IEEE 802.11s standard, a tree topology is established by the proactive tree-building mode of the Hybrid Wireless Mesh Protocol (HWMP). It is used for cases in which the root station (e.g., gateway) is an end point of the majority of the data connections. In the tree topology, the root or central stations (e.g., parent stations) are connected to the other stations (e.g., leaves) that are one level lower than the central station. Such mesh stations are likely to suffer heavily from contention in bottleneck links when the network has a high traffic load. Moreover, the dependence of the network on such stations is a point of vulnerability. A failure of the central station (e.g., a crash or simply going into sleep mode to save energy) can cripple the whole network in the tree topology. This causes performance degradation for end-to-end transmissions. In a connected mesh topology where the stations having two or more radio links between them are connected in such a way that if a failure subsists in any of the links, the other link could provide the redundancy to the network. We propose a scheme to utilize this characteristic by organizing the network into concentric tiers around the root mesh station. The tier structure facilitates path recovery and congestion control. The resulting mode is referred to as Tier-based Proactive Path Selection Mode (TPPSM). The performance of TPPSM is compared with the proactive tree mode of HWMP. Simulation results show that TPPSM has better performance.

• 전자공학회논문지
• /
• 제51권11호
• /
• pp.83-93
• /
• 2014

최근 수년간 전기적 상호 연결 (electrical interconnect, EI) 기반 네트워크-온-칩 (Network-on-Chip, NoC) 에 대한 연구가 활발히 진행되고 있는 가운데, 궁극적으로 금속 배선은 대역폭, 응답 시간(latency), 전력 소모 등에서 물리적 한계에 직면할 것으로 예상된다. 실리콘 포토닉스(silicon photonics) 기술 발전으로 광학적 상호 연결(optical interconnect, OI)을 결합한 하이브리드 광학 네트워크-온-칩(Hybrid Optical NoC, HONoC)이 이러한 문제를 극복하기 위한 유망한 해결책으로 부각되고 있다. 한편 시스템-온-칩(System-on-Chip, SoC)은 높은 에너지 효율을 위하여 이기종 멀티 코어(Heterogeneous multi-core)로 구성되고 있어서 정형화된 토폴로지 기반 NoC 아키텍처의 확장이 필요하다. 본 논문에서는 타깃 애플리케이션 트래픽 특성을 고려한 에너지 및 응답 시간 최적화 하이브리드 광학 네트워크-온-칩의 토폴로지 설계 기법을 제안한다. 유전자 알고리즘을 이용하여 구현하였고, 실험 결과 평균 전력손실은 13.84%, 평균 응답 시간은 28.14% 각각 감소하였다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제13권7호
• /
• pp.488-498
• /
• 2007

본 논문은 유비쿼터스 스마트 공간에서 중첩 FOV와 비중첩 FOV에 대한 카메라 네트워크의 시공간 위상을 표현하는 새로운 방법을 제안한다. 제안된 방법을 이용하여 다중 카메라들간의 움직이는 객체들을 인식 및 추적하였으며 이를 통해 카메라 네트워크의 위상을 결정하였다. 다중 카메라의 영상으로부터 여러 객체들을 추적하기 위해 여러 가지 방법들을 사용하였다. 우선, 단일 카메라에서 객체들의 겹침 문제를 해결하기 위해서 병합-분리(Merge-Split) 방법을 사용하였으며, 보다 정확한 객체 특성을 추출하기 위해 그리드 기반의 부분 추출 방법을 사용하였다. 또한, 비중첩 FOV를 포함하는 다중 카메라의 보이지 않는 지역에 대한 객체 추적을 위해 등장과 퇴장 영역간의 전이시간과 사람들의 외형 정보를 고려하였다. 본 논문에서는 다양한 등장과 퇴장 영역간의 전이시간을 추정하고 전이확률을 이용하여 무방향 가중치 그래프로써 카메라 위상을 가시적으로 표현하였다.