• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.15-22
• /
• 2023

This research introduces an innovative approach for fabricating microstructure surfaces using spray-coating deposition. The resulting surface, referred to as Magnetically Responsive Microstructures (MRM), exhibits hierarchically structured micro-pillar arrays with remarkably high aspect ratios. The fabrication process involves precisely mixing PDMS and hexane with Carbonyl iron powders, followed by ultrasonication and spray-coating on the top of a PDMS substrate placed on the neodymium magnet. The MRM surface shows hydrophobic properties, characterized by a contact angle surpassing 150° and an aspect ratio exceeding 10. Through a comprehensive exploration of critical parameters, including spray amount, magnet-substrate distance, and solution ratio enhanced dynamic tunability and exceptional hydrophobic characteristics are attained. This novel approach holds significant potential for diverse applications in the realm of dynamically tunable microstructures and magnetically responsive surfaces.

• 대한기계학회논문집B
• /
• 제34권1호
• /
• pp.77-82
• /
• 2010

소형분석시스템에서 미세채널의 상판이 제거되면 상판에 의한 빛 에너지 손실이 대폭 감소되어 광학측정법으로 대상을 분석할 때 장점을 갖는다. 본 연구에서는 상판이 없는 사각단면 미세채널 내 액체유동을 이해하려는 목적으로 실험과 전산유체역학 해석을 수행하였다. 개방형 사각단면 미세채널에서 입자추적기법으로 유속을 측정하였고, 채널의 단면적 변화에 따른 모세관 유동현상을 이론적으로 해석하였다. 단면의 너비와 높이가 각각 20 ${\mu}m$로 제작된 미세채널의 주입부에 물을 떨어뜨렸을 때 물은 오직 모세관 힘에 의해 미세채널을 따라 이동하였다. 액체의 젖음현상에 영향을 미치는 중요한 유동 파라미터는 채널의 크기와 표면장력, 점성 등으로 볼 수 있으며, 미세채널에서 액체 유동을 조절하는데 이용될 수 있다.

• 한국포장학회지
• /
• 제23권3호
• /
• pp.173-181
• /
• 2017

본 연구에서는 한국의 가공식품 포장 특징(재질, 형태 등)을 분석하기 위해 다소비 식품에서 가공식품만을 대상으로 하여 품목별 소매점 매출액 순위에 따라 구성하였고, 이를 품목별 포장 형태, 품목별 포장 재질, 포장 형태별 포장 재질로 나누어 분석하였다. 또한, 품목별, 포장 형태별, 포장 재질별 접촉 비율과 두께를 측정하고 분석하였다. 국내 유통 중인 가공식품의 포장 재질별 사용 실태 조사 결과, 폴리에틸렌(PE, 43.61%), 폴리프로필렌(PP, 17.75%), 폴리에틸렌 테레프탈레이트(PET, 12.05%), 알루미늄(9.08%) 순으로 사용 빈도가 높아, 합성수지제를 가장 많이 사용하나 전반적으로 다양한 포장 재질을 사용하고 있는 것으로 조사되었다. 가공식품의 포장 형태별 사용 실태를 조사한 결과, EU 기준에 따른 포장 형태 총 21가지로 분류되었고, 가장 많이 쓰이는 포장 형태는 유연 포장재/봉투/파우치(38.96%)로 조사되었다. 본 연구는 가공식품 포장 재질, 포장 형태, 포장재 두께, 포장재와 식품의 접촉 비율 등의 구체적이고 방대한 양의 정보를 정리하여 국내의 가공식품 포장 현황을 반영한 조사로써, 향후 국내 식품포장 현황 분석 연구에 있어 기초 자료를 제공하는 데에 도움이 될 것으로 기대된다.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.461-468
• /
• 2001

Impact between fruits and other materials is a major cause of product damage in harvesting and handling systems. The oriental pears are more susceptible to bruising than other fruits such as European pears and apples, and are required more careful handling. The interest in the handling of the pears for the processing systems has raised the question of the allowable drop height to which pears can be dropped without causing objectionable damage. Drop tests on pears were conducted using an impact device developed by authors to estimate the allowable drop height without bruising. The impact device was constructed to hold in a selected orientation and to release a fruit by vacuum for dropping on to a force transducer. The drop height was adjustable for zero to 60 cm to achieve the desired distance between the bottom of the fruits and the top of the impact force transducer. The transducer was secured to 150 kg$\sub$f/ concrete block. The transducer signal was sampled every 0.17 ms with a strain gage measurement board in the micro computer where it was digitaly stored for later analysis. The selected sample fruit was Niitaka cultivar of pears which is one of the most promising fruit for export in Korea. The pears were harvested during the 1998 harvest season from an orchard in Daejeon. The sample fruit was selected from two groups which were stored for 3 months and 5 months respectively by the method of current commercial practice. The pears were allowed to stabilize at environmental condition(18$^{\circ}C$, 65% rh) of the experimental room. One hundred fifty six pears were tested from the heights of 5, 7.5. 10 and 12.5 cm while measurement were made of impact peak force, contact time, time to peak force, dwell time, pear diameter and mass. The bioyield strength and modulus of elasticity were measured using UTM immediately after each drop test. The allowable drop height was estimated on the base of bioyield strength of the pears in two ways. One was assumed the peak force during impact test increasing linearly with time, and the other was based on the actual drop test results. The computer program was developed for measuring the impact characteristics of the pears and analyzing the data obtained in the study. The peak force increased while contact times decreased with increasing drop height and contact times of the sample from the hard tissue group. The allowable drop height increased with increasing bioyield strength and contact times, and also varied with Poisson\`s ratio, mass and equilibrium radius of the pears. The allowable drop height calculated by a theoretical method was in the range from 1 to 4 cm, meanwhile, the estimated drop height considering the result of the impact test was in the range from 1 to 6 cm. Since the physical properties of fruits affected significantly the allowable drop height, the physical properties of the fruits should be considered when estimating the allowable drop height.

• 한국운동역학회지
• /
• 제12권2호
• /
• pp.215-227
• /
• 2002

본 연구의 목적은 정상인 휠체어 농구 선수 8명을 대상으로 추진 및 방향전환 동작의 소요시간 측정 및 운동학적 분석을 통하여 포지션별 농구용 휠체어가 추진동작에 미치는 효과를 규명하는데 있다. 포지션별(포드, 센타, 가드) 휠체어의 한 주기(핸드림 접촉에서 다음 핸드림 접촉까지)를 2차원 DLT 방식을 이용하여 구하고자 하는 변인을 산출하였다. 가드용 휠체어는 직선 구간 및 방향전환 구간 모두에서 가장 빠르게 나타났으며, 센타용 휠체어는 방향전환 구간에서 제일 느린 것으로 나타났다. 이동 속도가 가장 빠른 가드용 휠체어는 손이 TDC(Top Dead Center)에 더 가깝게 접촉하며, 더 오랫동안 핸드림에 힘을 가해서 추진하며, 분당 추진빈도는 가장 적은 것으로 나타났다. 반면에 센타용 휠체어는 손이 TDC에서 가장 멀리 접촉하며, 가장 짧은 범위에서 핸드림에 힘을 가해서 추진하는 것으로 나타났다. 가드용 휠체어는 핸드림 접촉시 팔꿈치를 가장 많이 굽히고 몸통을 가장 많이 세우며, 센타용 휠체어는 핸드림 접촉시 팔꿈치를 가장 많이 펴고 몸통을 많이 굽히며 핸드림 이지시 가드용 휠체어에 비해 팔꿈치를 많이 펴는 것으로 나타났다. 휠체어 추진시 좌석의 높이가 가장 낮은 가드용 휠체어는 포드용 및 센타용 휠체어보다 팔꿈치 및 몸통각의 범위가 가장 큰 것으로 나타났다. 몸통 최대 각속도에서 가드용 휠체어는 다른 휠체어와 비교해서 가장 큰 값을 나타냈다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.344-344
• /
• 2014

Transparent amorphous oxide semiconductors such as a In-Ga-Zn-O (a-IGZO) have advantages for large area electronic devices; e.g., uniform deposition at a large area, optical transparency, a smooth surface, and large electron mobility >10 cm2/Vs, which is more than an order of magnitude larger than that of hydrogen amorphous silicon (a-Si;H).1) Thin film transistors (TFTs) that employ amorphous oxide semiconductors such as ZnO, In-Ga-Zn-O, or Hf-In-Zn-O (HIZO) are currently subject of intensive study owing to their high potential for application in flat panel displays. The device fabrication process involves a series of thin film deposition and photolithographic patterning steps. In order to minimize contamination, the substrates usually undergo a cleaning procedure using deionized water, before and after the growth of thin films by sputtering methods. The devices structure were fabricated top-contact gate TFTs using the a-IGZO films on the plastic substrates. The channel width and length were 80 and 20 um, respectively. The source and drain electrode regions were defined by photolithography and wet etching process. The electrodes consisting of Ti(15 nm)/Al(120 nm)/Ti(15nm) trilayers were deposited by direct current sputtering. The 30 nm thickness active IGZO layer deposited by rf magnetron sputtering at room temperature. The deposition condition is as follows: a rf power 200 W, a pressure of 5 mtorr, 10% of oxygen [O2/(O2+Ar)=0.1], and room temperature. A 9-nm-thick Al2O3 layer was formed as a first, third gate insulator by ALD deposition. A 290-nm-thick SS6908 organic dielectrics formed as second gate insulator by spin-coating. The schematic structure of the IGZO TFT is top gate contact geometry device structure for typical TFTs fabricated in this study. Drain current (IDS) versus drain-source voltage (VDS) output characteristics curve of a IGZO TFTs fabricated using the 3-layer gate insulator on a plastic substrate and log(IDS)-gate voltage (VG) characteristics for typical IGZO TFTs. The TFTs device has a channel width (W) of $80{\mu}m$ and a channel length (L) of $20{\mu}m$. The IDS-VDS curves showed well-defined transistor characteristics with saturation effects at VG>-10 V and VDS>-20 V for the inkjet printing IGZO device. The carrier charge mobility was determined to be 15.18 cm^2 V-1s-1 with FET threshold voltage of -3 V and on/off current ratio 10^9.

• Ocean Systems Engineering
• /
• 제2권2호
• /
• pp.99-113
• /
• 2012

Steel Catenary Risers (SCR) are the simplest and often the most economic solution compared to other riser types such as flexible pipe, riser towers, top tensioned risers, etc. The top of a SCR is connected to the host platform riser porch. The other end of the SCR connects to flowlines from subsea wells. The riser touchdown point (TDP), which is the location along the riser where contact with the sea floor first occurs, exhibits complex behaviors and often results in compression and fatigue related issues. Heave dynamic responses of semisubmersibles in extreme and operating sea states are crucial for feasibility of SCR application. Recent full field measurement results of a deep draft semisubmersible in Hurricane Gustav displayed the considerable discrepancies in heave responses characteristics between the measured and the simulated results. The adequacy and accuracy of the simulated results from recognized commercial software should be examined. This finding raised the awareness of shortcomings of current commercial software and potential risk in mega investment loss and environmental pollutions due to SCR failures. One main objective of this paper is to attempt to assess the importance and necessity of accounting for viscous effects during design and analysis by employing indicator of viscous parameter. Since viscous effects increase with nearly third power of significant wave height, thus newly increased metocean criteria per API in central Gulf of Mexico (GoM) and even more severe environmental conditions in Western Australia (WA) call for fundamental enhancements of the existing analysis tools to ensure reliable and robust design. Furthermore, another aim of this paper is to address the impacts of metocean criteria and design philosophy on semisubmersible hull sizing in WA and GoM.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.559-577
• /
• 2016

There are many theoretical analyses and experimental studies of the hydrodynamics for the tension leg platform (TLP) of a floating wind turbine. However, there has been little research on the arrangement of the TLP's internal structure. In this study, a TLP model and a 5-MW wind turbine model as proposed by the Minstitute of Technology and the National Renewable Energy Laboratory have been adopted, respectively, to comprehensively analyze wind effects and wave and current combinations. The external additional coupling loads on the TLP and the effects of the loads on variables of the internal structure have been calculated. The study investigates preliminary layout parameters-namely, the thickness of the tension leg body, the contact mode of the top tower on the tension leg, the internal stiffening arrangement, and the formation of the spoke structure-and conducts sensitivity analyses of the TLP internal structure. Stress is found to be at a maximum at the top of the tension leg structure and the maximum stress has low sensitivity to the load application point. Different methods of reducing maximum stress have been researched and analyzed, and the effectiveness of these methods is analyzed. Filling of the spoke structure with concrete is discussed. Since the TLP structure for offshore wind power is still under early exploration, arrangements and the configuration of the internal structure, exploration and improvements are ongoing. With regard to its research and analysis process, this paper aims to guide future applications of tension leg structures for floating wind turbine.

• 한국환경과학회지
• /
• 제16권6호
• /
• pp.735-743
• /
• 2007

A grouting method is the way to effectively prevent pollutants from spreading into the ground during the digging process of groundwater. This study, based on the comparative study of grouting methods being generally accepted, suggests various construction methods which are suitable for geological structure as follows: In Jeju Island, it is very likely that rocks may fall in shuttered zones such as cracks, joints, scoria layers, and clinker layers. For this reason, it is recommended that materials be injected from the bottom toward the top, not from the top to the bottom. In the case where the amount of injected materials become too large in the areas of cracks or joints because of high level of permeability coefficient, grouting materials which smeared into surrounding areas may cause unwanted cut in the aquifer of the bottom level. To avoid this, the amount of water should be reduced from the typical water-cement ratio of 1:2, and grouting materials with larger grading should be used. If the deep excavation of ground is made in Jeju Island, it is likely to have lots of voids because of geological characteristics. Based on the results of this research, it is found that to construct interior casing, the centralizer should be attached to the casing to prevent the casing from being in contact with the counter fort. The grouting in Jeju Island should be thicker than usual. To avoid over-use of grouting materials, to prevent grouting in more than necessary zone, and to facilitate grouting of void areas, the flexible selection of materials is required. And, to exactly figure out the interior of dug well, an examination through CCTV should necessarily be performed when grouting work is in progress.