• Title/Summary/Keyword: top round

Search Result 147, Processing Time 0.022 seconds

Implementation of RTP/RTCP for Teleconferencing System and Analysis of Quality-of-Service using Audio Data Transmission (영상회의 시스템을 위한 RTP/RTCP 구현 및 오디오 데이터 전송을 위용한 QoS 분석)

  • Kang, Min-Gyu;Hwang, Seung-Koo;Kim, Dong-Kyoo
    • The Transactions of the Korea Information Processing Society
    • /
    • v.5 no.12
    • /
    • pp.3047-3062
    • /
    • 1998
  • This paper deseribes the desihn and the implementation of the Realtime Transport Protocol(RTP)/ Rdaltime Control Protocol(RTCP) (RFC 1889,1890) that is used to transmit the audio/video data to any destination and to feedback the Quality of Service (QoS) information of the received media data to the sender, in the teleconferencing systems proposed by ITU-T. These protocols are implemented with multi thead technique and run on top of UDP/IP-Multicast through the socket interface as the underlying protocol. The upper layer is impelmented such that in can be accessed by the H245 comference control protocol. The RTP packetizes the digitized audio/video data from the encoder info a fixed format, and multieast to the participants. The RTCP monitors RTP packets and extracts the QoS values from it such as round-trip delay, jiter and packet loss to form RTCP packets and non periokically sends them to the sender site. In this Paper, we also descritx the study of measurement and analysis for QoS factors that observed on performing teleconferencing system over Internet. The results from this experiment is indicate that RTT and Jitter value are acceptable even entwork load is high. However, it appears that packet loss rate is high in daytime and most losses periods have length one or two.

  • PDF

Study on Quantitative Growth Analysis in Yam(Dioscorea spp.) (마의 생장해석(生長解析)에 관(關)한 연구(硏究))

  • Cho, Ji-Hyoung;Lee, Seong-Phil;Oh, Sei-Myoung
    • Korean Journal of Medicinal Crop Science
    • /
    • v.8 no.4
    • /
    • pp.362-372
    • /
    • 2000
  • This study was conducted to obtain the basic information on the production of high yield and qualitied yam in Andong, major yam-producing district, in Kyongbuk province, using three major Yam cultivars, such as Danma, Jangma and Alata (round type). Alata showed the longest tuber width while Jangma showed the longest tube length. Danma showed the highest tube yield at 2,123 kg/10a. Tubes of Alata had higher dry ratio than those of other cultivars, suggesting that Alata could be used as good processing materials. Characteristics of top parts, such as vine length, leaf number, and lateral vine number showed typical sigmoid curves. Tuber characteristics such as length, width and fresh weight of tuber were linearly increased as the growth period was progressed. Relative growth rate (RGR) for new tuber and stem reached the highest value at 86 DAT (days after transplanting). There were similar tendencies among the cultivars in net assimilation rate (NAR). The highest crop growth rate (CGR) was appeared at 156 DAT regardless of cultivars. In the changes of leaf area ratio (LAR), there were significant differences among three cultivars. LAR were decreased at 86, 106 and 136 DAT for Alata, Danma and Jangma, respectively. However, specific leaf weight (SLW) was greatly increased at 176 DAT, and leaf area index (LAI) was decreased at 156 DAT in all cultivars.

  • PDF

A Study on the Position and Meaning of the Back Garden in Wanggung-ri Site, Iksan (익산 왕궁리유적에서 후원의 위상과 의미에 대한 연구)

  • Jeon, Yong-Ho
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.34 no.4
    • /
    • pp.1-13
    • /
    • 2016
  • The Back garden in Wanggung-ri Site, Iksan clearly presents an aspect of the landscape gardening techniques of the Baekje, which are significantly unique in the landscape gardening history of East Asia as the structure connected to the main garden through a complex waterway system on a hill. The rear garden has a complex waterway system comprising a large inverted U-shape waterway and its branch waterways, sinuous waterway and water catchment system to enhance the landscape effect with a minimum amount of water on a hill, reducing damage by floods in the case of heavy rain and securing the amount of water required by the main space in the palace. A landscape element using various kinds and sizes of oddly shaped rocks decorated the water catchment area inside or around the large inverted U-shape waterway. On the top of the hill, the center in the Back garden, a building site in the size of 4 Kans each on the front and side was made on a square base surrounded by a round base stone. The building was identified on a space partially surrounded by the rectangular stonework on the left and right slope of the hill. While the functions and roles of the rectangular stonework are not accurately identified due to the poor conditions of the present site, the stonework may be related to the building inside it. The back garden in Wanggung-ri Site, Iksan has a winding pond-shaped waterway to pull or push water into or out of the garden in a rectangular pond shape, which was a conventional landscape gardening technique during the Baekje period. Since the main garden and the back garden in Wanggung-ri Site, Iksan form a systematic connection system, this paper tried to newly establish the main garden inside Iksan Wanggungseong as the 'royal garden'.

Spawning Behavior and Development of Eggs and Larvae of the Korea Freshwater Goby, Rhinogobius brunneus (Gobiidae: Perciformes) (한국산 밀어 (Rhinogobius brunneus)의 산란습성, 난발생 및 자어의 형태발달)

  • HAN Kyeong-Ho;KIM Yong Uk;CHOE Kyu-Jung
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.31 no.1
    • /
    • pp.114-120
    • /
    • 1998
  • The spawning behavior, development of eggs and larvae of the Korea freshwater goby, Rhinogobius brunneus (Temminck et Schlegel) were studied. The eggs were spawned as a one-layer mass, hanging from the underside of a small pebble, and guarded by one male. The eggs were elliptic, about 1.48 mm in length and 0.65 mm in breadth, with a round top and a somewhat flat base with glutinous fibers. Hatching in the indoor tank with $17.0^{\circ}C$ in mean water temperature started from the 146 hours after fertilization. In the late developing stages, the embryo moved and freely changed its head to face the free tip of the chorion (normal egg) or to the basal end with a boundle of adhesive filaments (agrippa egg). Newly-hatched larvae were $3.10\~3.30$ mm in total length (mean: 3.22 mm), and mouth and anus were not yet open. Melanophores were present on the air- bladder, around the anus, and on the ventral part of the caudal region. The larva $3\~4$ days old transformed to postlarval stage, and they were $3.30\~3.85$ mm in total length (mean: 3.60 mm). As yolk sac and oil globules werw nearly absorbed, mouth and anus were open, and they fed rotifers actively. In $20\~22$ days after hatching the larvae grew to 5.85 mm in 71, and the caudal notochord flex at $45^{\circ}$.

  • PDF

A study on enclosure in Daesoeng-dong Site, Kimhae (김해(金海) 대성동(大成洞) 환호유적(環濠遺蹟) 연구(硏究))

  • Jung, Eui-Do
    • Korean Journal of Heritage: History & Science
    • /
    • v.35
    • /
    • pp.28-56
    • /
    • 2002
  • There is no definite theory, which archeologists have believed to be built either for the protection or ceremonial purpose, of enclosure historical site exhibited from Bronze Age to Samhan era in Korea. The main conditions of choosing right enclosure were natural levee-backswamp-plateau, which all found in village on a hill. For this reasons Kimhae Daesoeng-dong enclosure discovered in 2001 is not an exception, and therefore this enclosure has been believed to be a beginning point of the farming society. In Korea there have been 2 types of enclosure. One is that enclosure entirely surrounds whole historic site itself and the other is that enclosure partially does. Although Kimhae Daesoeng-dong historic site has been discovered only part of it, it's not believed to have the first type-which surrounds the whole enclosure historic site In this research, 3 developing steps of enclosure historic site were defined. Enclosure surrounds only a part of the historic site is 1st step. Enclosure surrounds all around the site is 2nd step. The site discovered with big round clay pottery and developed into multiple enclosure is 3rd step. Since some researches have not been accomplished, the hypothesis above was suggested to have a better understanding of the development of enclosure historic site. The purpose of enclosure has been separately explained for the protection or for the ceremony. It is difficult to assert that excavation sites could be applied to only one of two purposes. But it is possible that both purposes of enclosure such as protection and as division from ceremonial area could be applied together. Kimhae Daesoeng-dong enclosure was shown for the purpose of division from ceremonial area. But we can not ignore that since Kimhae Daesoeng-dong enclosure exposed to the Sea and dwelling area was not shown from village hill, it would be probably for the protection. However enclosure of Gujibong village area in Daesoeng-dong had used for ceremonial purpose since the Bronze Age, even this enclosure would be possible to play an important role of being a center of legend of Gaya foundation. Many unsolved questions are still lying ahead. The enclosure was used for a short time, even if dwelling area was found in and out of enclosure, there were no differences between them, and although duplicate and triplicate enclosure were found, we could not sure which were before and after. Also we could not confirm the type of enclosure with location condition which was the flat land or the top of hill on floodplain. We should not divide the types of enclosure historic site due to differences from cross section of stratum. And I expect that we will have much data such as distribution of enclosure historic site in Yeongnam area where is concerned with origin and diffusion of Japan and China.

Changes in Public Bicycle Usage Patterns before and after COVID-19 in Seoul (코로나19 전후 서울시 공공 자전거 이용 패턴의 변화)

  • Il-Jung Seo;Jaehee Cho
    • The Journal of Bigdata
    • /
    • v.6 no.2
    • /
    • pp.139-149
    • /
    • 2021
  • Ddareungi, a public bicycle service in Seoul, establishes itself as a means of daily transportation for citizens in Seoul. We speculated that the pattern of using Ddareungi may have changed since COVID-19. This study explores changes in using Ddareungi after COVID-19 with descriptive statistical analysis and network analysis. The analysis results are summarized as follows. The average traveling distance and average traveling speed have decreased over the entire time in a day since COVID-19. The round trip rate has increased at dawn and morning and has decreased in the evening and night. The average weighted degree and average clustering coefficient have decreased, and the modularity has increased. The clusters, located north of the Han River in Seoul, had a similar geographic distribution before and after COVID-19. However, the clusters, located south of the Han River, had different geographic distributions after COVID-19. Traveling routes added to the top 5 traffic rankings after COVID-19 had an average traveling distance of fewer than 1,000 meters. We expect that the results of this study will help improve the public bicycle service in Seoul.

Development and Prospective of Day-neutral Strawberry Cultivars for Year-round Production (딸기 연중생산을 위한 중일성(Day-neutral) 품종 개발과 전망)

  • Jong Nam Lee;Do Yeon Kim
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2023.04a
    • /
    • pp.3-3
    • /
    • 2023
  • 우리나라 딸기는 시설재배 발전과 품종개발로 겨울을 대표하는 과일로 변신하였다. 이는 저온단일에서 꽃이 만들어져 착과되는 생태적(일계성)특성 때문이다. 우리나라의 딸기 정식기는 95%이상이 촉성작형으로 9월 중순 정식한 후 11월 하순부터 이듬해 5월 하순까지 약 6개월간 수확한다. 반대로 여름작형은 고온장일에서 꽃이 만들어져 착과되는 사계성 품종을 이용하는데 우리나라 500m 이상의 산간 고랭지에서 3-4월에 정식한 후 6월부터 11월까지 수확하지만 생산량은 전체의 0.3% 미만이다. 또한 여름딸기는 제과용으로만 사용되고 있어 6월부터 11월 사이에 신선딸기의 단경기가 발생된다. 이러한 문제를 재배적으로 해결하기 위해 일계성 품종을 이용하여 겨울부터 봄까지 포기냉장한 후 여름과 가을에 꺼내어 정식하면 45일 내외에 수확하는 주냉장 억제작형을 시도하였으나 우리나라에선 실용성이 떨어져 사라져간 기술이다. 그러나 네덜란드는 우리나라와 같은 주냉장기술을 활용(Waiting bed system, Table top system)하여 여름과 가을철에도 딸기를 생산하고 있다. 이 작형은 냉장기간이 길고 재배기술도 까다로울 뿐만아니라 1화방만 수확하여 수량성이 낮은 단점이 있다. 한편 미국에서는 일계성 품종이 품질은 좋으나 고온기에 꽃대발생이 어렵고 사계성은 품질이 떨어지는 단점을 극복하기 위해 일장의 길이와 관계없이 꽃대가 형성되는 중일성 딸기 품종을 보급하여 세계적으로 가장 많은 재배면적을 점유하고 있다. 연중생산이 가능한 중일성 품종을 개발하기 위해 먼저 유전자원을 수집하였고 품질이 좋은 일계성 품종을 중일성 품종과 교배하여 채종하였다. 교배종자를 파종하여 묘를 만든 후 정식하여 실생개체를 선발한 결과 고온장일 조건에서 개화되는 사계성(중일성)율은 약 10-20% 범위로 매우 낮았다. 선발된 우량계통은 영양번식을 통해 증식하여 생산력, 특성, 지역적응성 검정과정을 통해 품종을 개발하였다. 이렇게 단교잡에 의한 중일성 품종 선발육종은 선발율이 0.05%으로 매우 낮았다. 이렇게 우리나라 최초의 중일성딸기 '고슬' 품종이 개발되었다. 이 '고슬'은 9월부터 수확이 가능한데 이 때의 딸기 가격이 kg당 20,000원 이상으로 높으며, 수확기간은 '설향'보다 4개월 더 길게 재배가 가능하다. 연중재배를 위해서는 항상 8-25℃의 범위을 유지해야 품질이 높아지므로 재배관리가 중요하다. 흰가루병에는 저항성이 있으나 시들음병과 탄저병에는 약하고 당도와 경도가 높고, 향이 매우 진하다. 식물공장에서 매우 인기가 있는데 안정된 꽃대발생과 대과, 고당도와 함께 수술의 화분량이 많아 수정이 잘되는 특성으로 식물공장 사업이 확장되고 있는 중동나라에서도 로열티 계약(UAE 등)이 예정되어 있다. 1년 연중 개화되고 착과되는 특성으로 가정에서 기르는 반려식물로도 인기가 있다. 또한 아열대 고랭지대는 항상 서늘한 날씨이기 때문에 한번 정식후 1년 연중생산이 가능하여 2023년 베트남과 로열티 계약(1.6억원)을 하였다. 또한 '고슬'은 우리나라 신선딸기 수출 단경기에 생산되어 주년생산 수출체계에도 기여할 것으로 본다.

  • PDF

Analyzing the Effects of the Initiation Sequences of the MDS Blasting Method on Rock Fracturing Using SPH-FEM Coupling Technique (SPH-FEM 연계기법을 이용한 MDS 발파법의 기폭패턴별 암석파괴 효과 분석)

  • Byung-Hee Choi;Young-Geun Kim;Ki-Chan Jeon;Se-Wook Oh
    • Explosives and Blasting
    • /
    • v.41 no.3
    • /
    • pp.13-25
    • /
    • 2023
  • The conventional bench blasting method uses the bottom initiation in all blast holes in a round, whereas the MDS (mixture detonation system) method applies the bottom and top initiations alternately according to the spatial position or temporal sequence of each blast hole. The former and latter are respectively called the SMDS (spatial MDS) and TMDS (temporal MDS) methods. Another variant called MMDS (modified MDS) is designed for the specific use in the site having a fly-rock problem. This study compares the MDS method to the conventional method in the aspect of rock fracturing effect. The comparison is made by numerical simulations for a two-row bench blasting model in the LS-DYNA. The SPH-FEM coupling method is utilized for constructing the blasting model. The SPH elements are used for the rock in the near-field region of the blast holes, and the FEM elements for that in the far-field region. The RHT material model is used for the rock. As a result of the simulations, it was found that up to 0.4 m deeper damaged zone was appeared in the SMDS method than in the conventional method for the case of the burden 1.6 m and bench height 3.0 m. In addition, the fly-rock velocity to the normal direction of the bench slope was appeared about 2.0 m/s lower in the MMDS method compared to the other methods.

Edge to Edge Model and Delay Performance Evaluation for Autonomous Driving (자율 주행을 위한 Edge to Edge 모델 및 지연 성능 평가)

  • Cho, Moon Ki;Bae, Kyoung Yul
    • Journal of Intelligence and Information Systems
    • /
    • v.27 no.1
    • /
    • pp.191-207
    • /
    • 2021
  • Up to this day, mobile communications have evolved rapidly over the decades, mainly focusing on speed-up to meet the growing data demands of 2G to 5G. And with the start of the 5G era, efforts are being made to provide such various services to customers, as IoT, V2X, robots, artificial intelligence, augmented virtual reality, and smart cities, which are expected to change the environment of our lives and industries as a whole. In a bid to provide those services, on top of high speed data, reduced latency and reliability are critical for real-time services. Thus, 5G has paved the way for service delivery through maximum speed of 20Gbps, a delay of 1ms, and a connecting device of 106/㎢ In particular, in intelligent traffic control systems and services using various vehicle-based Vehicle to X (V2X), such as traffic control, in addition to high-speed data speed, reduction of delay and reliability for real-time services are very important. 5G communication uses high frequencies of 3.5Ghz and 28Ghz. These high-frequency waves can go with high-speed thanks to their straightness while their short wavelength and small diffraction angle limit their reach to distance and prevent them from penetrating walls, causing restrictions on their use indoors. Therefore, under existing networks it's difficult to overcome these constraints. The underlying centralized SDN also has a limited capability in offering delay-sensitive services because communication with many nodes creates overload in its processing. Basically, SDN, which means a structure that separates signals from the control plane from packets in the data plane, requires control of the delay-related tree structure available in the event of an emergency during autonomous driving. In these scenarios, the network architecture that handles in-vehicle information is a major variable of delay. Since SDNs in general centralized structures are difficult to meet the desired delay level, studies on the optimal size of SDNs for information processing should be conducted. Thus, SDNs need to be separated on a certain scale and construct a new type of network, which can efficiently respond to dynamically changing traffic and provide high-quality, flexible services. Moreover, the structure of these networks is closely related to ultra-low latency, high confidence, and hyper-connectivity and should be based on a new form of split SDN rather than an existing centralized SDN structure, even in the case of the worst condition. And in these SDN structural networks, where automobiles pass through small 5G cells very quickly, the information change cycle, round trip delay (RTD), and the data processing time of SDN are highly correlated with the delay. Of these, RDT is not a significant factor because it has sufficient speed and less than 1 ms of delay, but the information change cycle and data processing time of SDN are factors that greatly affect the delay. Especially, in an emergency of self-driving environment linked to an ITS(Intelligent Traffic System) that requires low latency and high reliability, information should be transmitted and processed very quickly. That is a case in point where delay plays a very sensitive role. In this paper, we study the SDN architecture in emergencies during autonomous driving and conduct analysis through simulation of the correlation with the cell layer in which the vehicle should request relevant information according to the information flow. For simulation: As the Data Rate of 5G is high enough, we can assume the information for neighbor vehicle support to the car without errors. Furthermore, we assumed 5G small cells within 50 ~ 250 m in cell radius, and the maximum speed of the vehicle was considered as a 30km ~ 200 km/hour in order to examine the network architecture to minimize the delay.

Mushroom growth and cultivation environment at cultivation house of vinyl bag cultivation Shiitake mushroom on high-temperature period (고온기 표고 톱밥재배용 재배사 내의 환경 제어시스템과 버섯생육 온도)

  • Jhune, Chang-Sung;Kong, Won Sik;Park, Hye-Sung;Cho, Jae-Han;Lee, Kang-Hyo
    • Journal of Mushroom
    • /
    • v.12 no.4
    • /
    • pp.263-269
    • /
    • 2014
  • Although sawdust cultivation of shiitake (Lentinula edodes) is becoming more common, it is insufficiently competitive in spring and autumn, the best time to breed shiitake. Thus, it is urgently needed to develop a technique for all year round cultivation of shiitake using mushroom growing beds. In the present study, the temperature changes according to the location of shiitake cultivation facilities were investigated. We confirmed that a refrigerator, an air conditioner, triple membranes, shiitake cultivation beds, fog nozzles which were installed in the shiitake cultivation facilities play an important role in keeping the low temperature. Bag cultivation of shiitake was tested in temperature variation from $14^{\circ}C$ to $29^{\circ}C$ with a $3^{\circ}C$ interval to know its cultivating temperature range in hot summer season. In summary, the sawdust cultivation of shiitake is possible when the temperature difference between top and bottom is maintained below $1^{\circ}C$. And the temperature of the shiitake cultivation facilities should be maintained below $23^{\circ}C$ in the induction period for fruitbody formation.