• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.6
• /
• pp.53-63
• /
• 2012

The objectives of this study were to develop a linked watershed-waterbody modeling system and to assess the impacts of indirect wastewater reuse on irrigation water quality. The Osan stream watershed within Gyeonggi-do of South Korea was selected for this study. The linked modeling system was composed of the SWAT (Soil and water assessment tool) and QUALKO2 models. The SWAT model was calibrated and validated using the stream discharge and water quality data from 2010 to 2011. Runoff and non-point source pollutants from each subbasin and stream discharge from 1980 to 2009 were simulated by the SWAT model and applied to the QUALKO2 model. The QUALKO2 model was calibrated and validated under the conditions of low water and normal discharges, respectively. Finally, The 10-day irrigation water quality from April to September was simulated. The statistical measures of coefficient of determination ($R^2$), reliability index (RI), and efficiency index (EI) were used to evaluate the system performance. The $R^2$, RI and EI values ranged from 0.5 to 1.0, 1.03 to 1.92, and -35.03 to 0.95, respectively. The 10-day irrigation water quality showed the concentrations of BOD and coliform exceeded the water quality guidelines for wastewater reuse. The linked modeling system can be a useful tool to estimate non-point source pollutant loads in watershed and to control the water quality of effluent from a wastewater treatment plant and irrigation water in the downstream waterbody.

• Safety and Health at Work
• /
• v.5 no.2
• /
• pp.80-85
• /
• 2014

Background: Currently available questionnaires for evaluating the quality of worklife do not fully examine every factor related to worklife in all cultures. A tool in Thai is therefore needed for the direct evaluation of the quality of worklife. Our aim was to translate the Work-related Quality of Life Scale-2 (WRQLS-2) into Thai, to assess the validity and reliability of the Thai-translated version, and to examine the tool's accuracy vis-$\grave{a}$-vis nursing in Thailand. Methods: This was a descriptive correlation study. Forward and backward translations were performed to develop a Thai version of the WRQLS. Six nursing experts participated in assessing content validity and 374 registered nurses (RNs) participated in its testing. After a 2-week interval, 67 RNs were retested. Structural validity was examined using principal components analysis. The Cronbach's alpha values were calculated. The respective independent sample t test and intraclass correlation coefficient were used to analyze known-group validity and test-retest reliability. Multistate sampling was used to select 374 RNs from the In- and Outpatient Department of Srinagarind Hospital of the Khon Kaen University (Khon Kaen, Thailand). Results: The content validity index of the scale was 0.97. Principal components analysis resulted in a seven-factor model, which explains 59% of the total variance. The overall Cronbach's alpha value was 0.925, whereas the subscales ranged between 0.67 and 0.82. In the assessment results, the known-group validity was established for the difference between civil servants and university employees [F (7.982, 0.005) and t (3.351; p < 0.05)]. Civil servants apparently had a better quality worklife, compared to university employees. Good test-retest reliability was observed (r = 0.892, p < 0.05). Conclusion: The Thai version of a WRQLS appears to be well validated and practicable for determining the quality of the work-life among nurses in Thailand.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.34 no.2
• /
• pp.108-123
• /
• 2021

Objectives: The purpose of this study is to assess the methodological and reporting quality of the systematic reviews in the Journal of Korean obstetrics and gynecology. Methods: Systematic reviews in the Journal of Korean obstetrics and gynecology were selected from January 1987 to February 2021, by searching Koreanstudies Information Service System (KISS) and the search system of the Society of Korean medicine obstetrics and gynecology. The methodological and reporting quality was assessed using A MeaSurement Tool to Assess systematic Reviews 2 (AMSTAR 2) tool and Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist. Results: Total of 19 systematic reviews were finally included for this study. The levels of methodological quality were low in 63.2% and very low in 36.8%. As a result of evaluating the reporting quality, 22 to 15 (average 18.6) items out of 27 items (81.5 to 55.6%) were reported. Conclusions: The results of a systematic review are helpful in giving a high level of evidence. In order to improve the quality of systematic reviews published in the Journal of Korean Obstetrics and Gynecology, it is necessary to perform and report according to the the PRISMA checklist and AMSTAR 2.

• Nutrition Research and Practice
• /
• v.18 no.5
• /
• pp.746-759
• /
• 2024

BACKGROUND/OBJECTIVES: To encourage schools to transform school meal programs to be more educational, it is necessary to evaluate the related environment using a whole school approach. We developed a school food culture evaluation tool to quantitatively evaluate school food culture in Gyeonggi Province, Korea. SUBJECTS/METHODS: Based on a literature review, a school food culture evaluation system consisting of areas, subareas, indicators, and questions (scored on a 5-point scale) was constructed. The validity of the tool was reviewed using focus group interviews, the Delphi technique, and a preliminary survey. Subsequently, evaluation tool was applied to elementary, middle, and high schools in Gyeonggi Province. Data from 115 schools were used for the final analysis. This included 64 elementary schools, 29 middle schools, and 22 high schools. At least one respondent from each group-school administrators, teachers, and nutrition teachers (or dietitians)-participated. The results were compared at the school level. RESULTS: The evaluation tool consisted of 66 questions in 5 areas (institutional environment, physical environment, educational environment, educational governance, and school meal quality). The total average score for school food culture was 3.83 points (elementary school 3.89 points, middle school 3.76 points, and high school 3.76 points) and did not differ significantly among school levels. Among the 5 evaluation areas, scores were highest for institutional environment (4.43 points) and lowest for physical environment (3.07 points). Scores for educational environment, educational governance, and school meal quality were 3.86, 3.85, and 3.97 points, respectively. CONCLUSION: It is necessary to improve the physical environment to create a desirable school food culture in Gyeonggi Province. To effectively promote healthy eating, ongoing investment and interventions by local authorities at improving school food culture are needed, with an emphasis on particular factors, such as the eating environment and staff training.

• Journal of Korean Society for Quality Management
• /
• v.25 no.4
• /
• pp.115-130
• /
• 1997

SQM (Software Quality Metrics) is a methodology whose primary objective is the measurement of compliances to requirements using a set of software life cycle properties called quality factors, which is based on the hierachical relationshiips between factors, criteria and elements. For this study, two factors (Correctness, Maintainability) and five criteria were selected. In addition, several tens of quality elements were developed to su, pp.rt them. Qualities of three computer programs which are being used for engineering purpose were measured. As a result, it is concluded that SQM is a valuable method for continuously monitoring the pulse of software quality development and that it can be used as a tool for software quality assurance.

• Tribology and Lubricants
• /
• v.6 no.1
• /
• pp.82-88
• /
• 1990

In order to investigate tribological effects of coatings on different places on tool wear, commercial quality coated inserts were tested in production speed machining after the coatings on clearance or rake face of coated tools were selectively removed. The experimental results demonstrated that the primary role of coatings in tool wear was the reduction of the thermochemical adhesion between the tool material and workpiece. And the coating on rake face was observed to retard the progress of flank wear. In case of machining carbon steel, multicoated tools showed the most favorable results for considering the notch wear.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.159-166
• /
• 2005

This study deals with the correction of gear tooth profile error by finish roll forming. First, we experimentally confirmed that the tooth profile error is a synthesis of the concave error and the pressure angle error. Since various types of tooth profile errors appear in the experiments, we introduced evaluation parameters for rolling gears to objectively evaluate profile quality. Using these evaluation parameters, we clarified the relationship among the tooth profile error, the addendum modification factor (A. M. factor), and the tool loading force. We verified the character of concave error, pressure angle error, tool loading force and number of cycles of finish roll forming by using a forced displacement method. This study makes clear that tool loading force and number of cycles of finish roll forming are very important factors that affect involute tooth profile error. The results of the experiment and analysis show that the proposed method reduces concave and pressure angle errors.

• Transactions of Materials Processing
• /
• v.18 no.2
• /
• pp.144-149
• /
• 2009

Recently, the monitoring technology of machining process is very important to improve productivity and quality in manufacturing filed. Such monitoring technology has been performed to measurement using vibration signal, acoustic emission signal and tool dynamometer. However, micro machining is limited small-scale parts machining because micro tool is very small and weakness to generate signal in micro machining process. Therefore, this study has efficient sensing technology for real monitoring system in micro machine that is proposed to supplement a disadvantage of single-sensor by multi sensor. From experimental result, it was evaluated tool wear and cutting situation according to repetitive slot cutting condition and changing cutting condition, and it was performed monitoring spindle rpm and condition according to compare acceleration signal with current signal.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.04a
• /
• pp.365-369
• /
• 2004

The Advantages of hot machining are the reduction of cutting forces, tool wear, and the increase of material removal rates. In this study, a hot-machining using gas flame heating characteristics of milling by CBN tip was analyzed, and the influence of the surface temperature and the depth of cut on the tool life were investigated. The results show that hot machining of tungsten carbide-alloyed is more effective than conventional machining. In addition, some advantages obtained from hot machining, such as decrease of tool wear and cutting force, high surface quality.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.416-428
• /
• 1999

A user-interactive pixel design tool for high-quality TFT-LCDs is realized and used to explore the sensitivity of the various array and device parameters for optimizing pixel design. In this tool, the Thompson cable equation and gradual-channel approximation were used for the gate time delay and TFT current modeling respectively. With this tool, each capacitance element, and TFT and array dimensions can be optimized under given design specifications. The electrical characteristics such ascharging ratio, gate time delay, pixel voltage level-shift, and holding ratio can be analyzed. The sensitivity analysis of those design parameters were executed and presented.