• Journal of Surface Science and Engineering
• /
• v.28 no.6
• /
• pp.343-351
• /
• 1995

Titanium nitride films have been prepared on various substrates (silicon wafer, HSS) by cathode arc ion plating process to measure microhardness, adhesion and wear-resistant behaviors by changing the substrate bias voltages (0∼-300V), thickness and roughness. Microhardnesses were measured by micro vickers hardness tester, the adhesion strengths were evaluated by acoustic signals through the scratch test with incremental applied load. As the substrate bias voltages were increased, the ｛111｝ orientation was predominant, the microhardnesses and adhesion strengths of tool steel were observed to be stronger than those of without subatrate bias voltage. Adhesion strengths of the substrate bias were 4-7 times higher than those of without the substrate bias, confirmed by SEM with EDX. Wear resistances were used pin-on-disk tribotester and TiN costing reduced the abrasive wear. As the substrate bias was increased, the weight loss and the friction coefficient was decreased.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.78-89
• /
• 1992

The most important criteria of quality of meshing and contact of gears are the low level of noise and the sufficient dimensions and location of the contact. A new approach for determination of machine-tool settings for spiral bevel gears is proposed. The proposed settings provide a function of transmission errors, the desired location and orientation of contact. The function is able to absorb piece-wise linear functions of transmission errors that are caused by the gear misalignment and to reduce the gear noise. The determination of pinion machine-tool settings is based on the local synthesis of gears. A computer program for simulation of meshing bearing contact and determination of transmission errors for misaligned has been developed.

• Journal of Korean Academy of Nursing Administration
• /
• v.13 no.4
• /
• pp.421-430
• /
• 2007

Purpose: The objective of this research is to explore the degree of conflict of nurses, and the relationships among conflict, job satisfaction, and organizational commitment for providing effective management of nurses. Methods: The research was conducted from July 1 to 31, 2006, with a survey of 280 nurses at seven general hospitals in Seoul. The survey tools were used Rizzo et al(1970)' tool for role conflict and role ambiguity Park(1988)'s tool for vertical conflict, and horizontal conflict, Park-Yoon's tool for job satisfaction(1992) and Mowday et al(1979) for organizational commitment. The acquired data were analyzed with SPSS using descriptive methods, t-test, ANOVA, LSD, Pearson correlation coefficient. Results: Overall conflict of nurses showed 3.00 .Job satisfaction of nurses revealed 3.12, and organizational commitment showed 3.34. The relationships between conflict and job satisfaction showed -65.6%. The relationships between conflict and organizational commitment revealed -56.2%. Conclusion: Conflict management is important factor of management for increasing job satisfaction and organizational commitment. It is needed that orientation and education program of detailed job description for nurses.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.2
• /
• pp.161-167
• /
• 1983

In this study the phenomenon of cutting stress which arises on cutting tools and work pieces in cutting process is investigated by rake angle of cutting tools and feed for this measurement, P$_{s}$-1 (high modulus, photolastic Inc.) was used as a cutting tool, P$_{s}$-3 (medium modulus, photolastic Inc.) was used as work piece and reduction apparatus was attached to the head stock, and orthogonal cutting was adapted as a cutting method and transparent glass was used to block the strain in the orientation of thickness. The followings are the results of this study. (1) Photoelastic experimental equipments have made it possible to make dynamic measurement and analyze stress distribution in cutting tool and work piece surface which has hitherto been conducted only in static measurement and analyzing method. (2) The maximum stress arising at tools and work pieces in cutting process is on the tool edge tip, and the maximum stress arising on the tip of cutting tools is equal to that on the contacting area of work pieces in values. (3) The distributions of maximum shear stress on certain parts of the cutting tools and work pieces are as follows; for cutting tools, .alpha.=12.deg., .alpha.=0.deg., .alpha.=-12.deg. in order, and for work pieces, .alpha.=-12.deg., .alpha.=0.deg., .alpha.=12.deg. in opposite order.der.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.856-859
• /
• 2005

The OPMT(Orientation-adjustable Patch-type Magnetostrictive Transducer) was proposed as a tool for generating and measuring the ultrasonic Lamb wave in plate type structures. This sensor has a lot of new features compared to the traditional piezo-type ultrasonic transducers. As an example, it does not need any kind of wiring for lunching or measuring ultrasonic waves. But it has also definite limitation for practical usage as a nondestructive testing tool in that it cannot help rotating the direction of ultrasonic wave manually. The idea for 'scanning OPMT' is proposed in this respect. Two kinds of basic ideas for rotating the wave direction not manually but electrically are proposed. The fabrication of the transducer and the testing for Identifying the primary characteristics are done for one of the proposed transducers. The results says that there are the possibilities as a new tool for NDE in that the proposed transducer follows well the characteristics of the traditional OPMT. But there are also the 1imitations to overcome.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.123-130
• /
• 2002

A general formulation for shape design sensitivity analysis over three dimensional beam structure is developed based on a variational formulation of the beam in linear elasticity. Sensitivity formula is derived based on variational equations in cartesian coordinates using the material derivative concept and adjoint variable method for the displacement and Von-Mises stress functionals. Shape variation is considered for the beam shape in general 3-dimensional direction as well as for the orientation angle of the beam cross section. In the sensitivity expression, the end points evaluation at each beam segment is added to the integral formula, which are summed over the entire structure. The sensitivity formula can be evaluated with generality and ease even by employing piecewise linear design velocity field despite the bending model is fourth order differential equation. For the numerical implementation, commercial software ANSYS is used as analysis tool for the primal and adjoint analysis. Once the design variable set is defined using ANSYS language, shape and orientation variation vector at each node is generated by making finite difference to the shape with respect to each design parameter, and is used for the computation of sensitivity formula. Several numerical examples are taken to show the advantage of the method, in which the accuracy of the sensitivity is evaluated. The results are found excellent even by employing a simple linear function for the design velocity evaluation. Shape optimization is carried out for the geometric design of an archgrid and tilted bridge, which is to minimize maximum stress over the structure while maintaining constant weight. In conclusion, the proposed formulation is a useful and easy tool in finding optimum shape in a variety of the spatial frame structures.

• Korean Medical Education Review
• /
• v.25 no.2
• /
• pp.159-173
• /
• 2023

The purpose of this study was to develop and validate a competency tool for new nurses and to pilot-test it with new nurses. A Delphi survey was conducted to develop a competency tool, and a self-evaluation was conducted among new nurses who pilot-tested the finally derived competencies. The Delphi survey panel consisted of 18 people, including adjunct professors at the College of Nursing, nursing managers, and nurses with master's degrees. The Delphi survey asked about the validity of the competencies constructed in two rounds. After analyzing the Delphi results with mean, standard deviation, content validity ratio, degrees of convergence, and degrees of consensus, 12 core competencies and 36 enabling competencies were finally derived. The competencies consisted of clinical judgment and management (nine items), task competence (four items), patient orientation (five items), moral value orientation (three items), cooperation (two items), supply management (two items), professional development (three items), confidence (one item), self-control (two items), flexibility (two items), influence (one item), and nurturing others (two items). The finally derived competencies were pilot-tested with 229 new nurses who had worked for 2-12 months. The self-evaluation scores of new nurses were distributed differently according to their working period. In this study, the competencies required for new nurses were identified and the corresponding enabling competencies were identified. In the future, it is expected that a competency-based education program will be prepared based on these findings, and furthermore, it will be possible to provide high-quality medical and nursing services that meet patients' needs by improving the competency of new nurses and lowering the turnover rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.329-329
• /
• 2012

Mobile 기기로 둘러싸여있는 현대의 환경에서 Flash memory에 대한 중요성은 날로 더해가고 있다. Flash memory의 가격 경쟁력 강화와 사용되는 기기의 소형화를 위해 flash memory의 비례축소가 중요한 문제로 부각되고 있다. 그러나 다결정 실리콘을 플로팅 게이트로 이용하는planar flash memory 소자의 경우 비례 축소 시 short channel effect 와 leakage current, subthreshold swing의 증가로 인한 성능저하와 같은 문제들로 인해 한계에 다다르고 있다. 이를 해결하기 위해 CTF 메모리 소자, nanowire FET, FinFET과 같은 새로운 구조를 가지는 메모리소자에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 22 nm 게이트 크기의 FinFET 구조를 가지는 플래시 메모리소자에서 fin의 두께와 높이의 변화에 따른 메모리 소자의 전기적 특성을 3-dimensional 구조에서 technology computer aided design ( TCAD ) tool을 이용하여 시뮬레이션 하였다. 본 연구에서는 3D FinFET 구조를 가진 플래시 메모리에 대한 시뮬레이션 하였다. FinFET 구조에서 채널영역은 planar 구조와 다르게 표면층이 multi-orientation을 가지므로 본 계산에서는 multi-orientation Lombardi mobility model을 이용하여 계산하였다. 계산에 사용된 FinFET flash memory 구조는 substrate의 도핑농도는 $1{\times}10^{18}$로 하였으며 source, drain, gate의 도핑농도는 $1{\times}10^{20}$으로 설정하여 계산하였다. Fin 높이는 28 nm로 고정한 상태에서 fin의 두께는 12 nm부터 28nm까지 6단계로 나누어서 각 구조에 대한 프로그램 특성과 전기적 특성을 관찰 하였다. 계산결과 FinFET 구조의 fin 두께가 두꺼워 질수록 채널형성이 늦어져 threshold voltage 값이 커지게 되고 subthreshold swing 값 또한 증가하여 전기적 특성이 나빠짐을 확인하였다. 각 구조에서의 전기장과 전기적 위치에너지의 분포가 fin의 두께에 따라 달라지므로써 이로 인해 프로그램 특성과 전기적 특성이 변화함을 확인하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.155-160
• /
• 2002

Recently, the development of aerospace and automobile industries has brought new technological challenges, rebated to the growing complexity of products and the new geometry of the models. High speed milling with a 5-Axis milling machine has been widely used fur 3D sculptured surface parts. When turbine blades are machined by a 5-axis milling, their thin and cantilever shape causes vibrations, deflections and twists. Therefore, the surface roughness and the waviness of the workpiece are not good. In this paper, the effects of cutter orientation and the lead/tilt angle used to machine turbine blades with a 5-axis high speed ball end-milling were investigated to improve geometric accuracy and surface integrity. The experiments were performed using a lead/tilt angle of 15$^{\circ}$ to the workpiece with four cutter directions such as horizontal outward, horizontal inward, vertical outward, and vortical inward directions. Workpiece deflection, surface roughness and the machined surface were all measured with various cutter orientations such as cutting directions, and lead/tilt angle. The results show that the best cutting strategy for machining turbine blades with a 5-axis milling is horizontal inward direction with a tilt angle.

• The Mathematical Education
• /
• v.52 no.4
• /
• pp.531-547
• /
• 2013

The purpose of the study is to examine how effects of activities using Google SketchUp on students' spatial ability and 3D geometric thinking in measuring the volume of solid figures. By comparing the results from pre- and post-tests between the experimental group and control group, we found that activities using Google SketchUp help students improve their spatial ability in the spatial orientation and visualization. In addition, more than half students in the experimental group moved from level 4 up to level 7 in thinking process of measuring the volume in terms of Battista(2004)'s levels. This study suggests that the instruction with Google SketchUp can help to improve students' spatial ability and 3D geometric thinking in the regular class in middle school. In addition, SketchUp can be an advanced technological tool to support students' self-directed learning, which create an efficient educational environment and a great opportunity to learn geometry in an effective manner.