• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.584-594
• /
• 2014

To increase of surface hydrophilicity of polymeric thin films is an important approaching technique for introduction of self-cleaning and/or antifogging properties on the surfaces of those films. In general, hydrophilic surface can be produced by coating non ionic surfactants or by increasing surface energy. Various non-ionic surfactants, such as Tween, Span, and PEG-PPG block copolymers were selected for our experiments, because they are cheap and well soluble in toluene system as well as they contain several reactive hydroxy fuctional groups with coupling agents. Blending conditions influence the PET film surface hydrophilicities. However, the introduction of only these surfactants on the surface of PET films did not show the high durability of hydrophilic properties after washing with water. To improve the durability two types of coupling agents such as epoxide and diisocyanate were adopted. Contact angle of water on hydrophilically coated PET film surface with 6 wt% of isophrone diisocyanate(IPDI) containing coating solution was reached to $8.7^{\circ}$, which was an indirect evidence for very high surface hydrophilicity. A light(500 nm of wavelength) transmittance value of coated PET film was changed only from 87% to 85% with keeping a good transparent property. This film can be usable for self-cleaning film industries.

• Toxicological Research
• /
• v.17
• /
• pp.305-307
• /
• 2001

Toluene diisocyanate (TDI) is widely used in the manufacture of polyurethanes and is a recognized cause of occupational asthma. Although extensive investigations have been undertaken, the molecular mechanism(s) of the disease is still unclear. We hypothesized that inflammatory cytokines are required during both the sensitization and elicitation phases of the disease and have utilized TNF-R knock-out (KO) mice to address the hypothesis. Black C57 TNFR knock-out mice were exposed to TDI by sc injection and challenged by inhalation of 100 ppb TDI vapor. Control animals included: wild type C57 animals, sham-exposed animals that were challenged with TDI, and animals that were injected with anti-TNF antibodies prior to sensitization and again prior to challenge. Total IgE was increased in the knock-out animals compared with the wild type sensitized and challenged animals whereas TDI-specific IgG antibodies did not differ significantly in KO and wild type animals. There was less inflammation in the nares and trachea in KO animals compared with the wild type animals exposed to TD1 as well as less goblet cell hyperplasia and epithelial damage. Airway reactivity was assessed in animals treated with anti-TNF$\alpha$ antibody and found to be substantially reduced compared with that in sensitized and challenged animals. These results indicate that TNF$\alpha$ plays a role in the immunologic and physiologic responses and in airways inflammation in this animal model and suggests a role for TNF in occupational asthma due to TDI.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.442-449
• /
• 2010

Polyurethane(PU) prepolymer was synthesized from ethylene oxide/propylene oxide(EO/PO) random polyether polyol, toluene diisocyanate and chain extender such as ethylene glycol and 1,4-butanediol. PU foams having various compositions were fabricated from PU prepolymers with different hard segment contents(%) and mixed foaming solution of different compositions. PU foam from chain extender-introduced PU prepolymer and mixed foaming solution containing glycerin showed better mechanical property than other groups. Various PU foams were tested on their mechanical property, moisture vapor transmission rate, absorption speed, absorptivity, morphology and cell culture test. According to the test, the PU foam fabricated from chain extender-introduced PU prepolymer and mixed foaming solution containing optimum composition of F-68, glycerin and CMC was found to have the best property for wound dressing materials. From in vivo animal study, it was confirmed that above PU foam showed rapid wound recovery.

• Journal of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.58-65
• /
• 1983

The mechanical properties (tensile strength, 100% modulus and hardness) of the urethane elastomers prepared from hydroxyl terminated polybutadiene (HTPB), several low molecular weight diols (ethylene glycol, 1, 3-propane diol, 1,4-butane diol, 1,5-pentane diol and 1,6-hexane diol) and two kinds of diisocyanates(TDI: toluene diisocyanate, IPDI: isophorone diisomechanical properties were enhanced for the increases of the concentrations of the urethane group, as predicted. In case of TDI, when the mechanical properties of the elastomers were plotted patterns were observed, which can be explained by hydrogen bondings depending on the number of the methylene carbons. But the mechanical properties of the elastomers derived from IPDI had decreasing curves against the number of methylene carbons in low molecular weight diols, without the characteristic zigzag patterns.

• Fibers and Polymers
• /
• v.7 no.1
• /
• pp.12-19
• /
• 2006

For thermal adaptable fabrics, the polyurethane-urea microcapsules containing phase-change materials (PCMs: hexadecane, octadecane and eicosane) were successfully synthesized by interfacial polycondensation using 2,4-toluene diisocyanate (TDI)/poly(ethylene glycol) (PEG400)/ethylene diamine (EDA) as shell monomers and nonionic surfactant NP-12 in an emulsion system under stirring rates of $3,000{\sim}13,000$ rpm. The mean particle size of microcapsule decreased significantly with increasing the stirring rate up to 11,000 rpm, and then leveled off. The mean particle size increased with increasing the content and molecular weight (eicosane > octadecane > hexadecane) of PCMs at the same stirring rate. The mean particle sizes of microcapsules were found to decrease with increasing the NP-12 content up to 1.5 wt%, and thereafter increased a little. It was found that the melting temperature ($T_m$) and crystallization temperature ($T_c$) of three kinds of encapsulated PCMs and their enthalpy changes (${\Delta}H_m,{\Delta}H_c$) increased with increasing PCM contents. The encapsulation efficiencies (Ee) of hexadecane microcapsule linearly increased with increasing the content of hexadecane. It was found that the stable microcapsule containing 50 wt% of hexadecane could be obtained in this study. However, Ee of octadecane and eicosane microcapsules increased with increasing PCM's contents up to 40 wt%, and then decreased a little. By considering the encapsulation efficiency, it was found that the maximum/optimum contents of octadecane and eicosane microcapsules were about 40 wt%. By the dynamic thermal performance test, it was found that the maximum buffering levels of Nylon fabrics coated with hexadecane, octadecane, and eicosane microcapsules were about $-2.4/+2.9^{\circ}C,\;-3.6/+3.6^{\circ}C\;and\;-4.0/+4.7^{\circ}C$, respectively.

• Toxicological Research
• /
• v.18 no.2
• /
• pp.175-181
• /
• 2002

Allergic contact dermatitis (skin sensitization) may be caused by a wide variety of chemicals. A murine local lymph node assay (LLNA) has been developed as an alternative to guinea pig models for assessing the contact sensitization potential of chemical. This study was carried out to evaluate the skin sensitization potential for chemicals in Balb/c mice by LLNA. Contact allergen, dinitrochlorobenzene (DNCB), respiratory allergen, toluene diisocyanate (TDI) and a weak allergen, $\alpha$-hexlycinnamaldehyde (HCA) were wed as positive chemicals and irritant, sodium lauryl sulfate(SLS) also wed as a reference chemical in this study. The weights of lymph node in the mice treated with DNCB, TDI, and HCA were increased compared to vehicle control. There was a significant increase in lymph node weight of mice treated with high concentration of SLS compared to vehicle control. The stimulation index (SI) of Lymph node cell in the mice treated with DNCB, TDI, and HCA revealed over three-fold increase compared to vehicle control by $3^H$-thymidine uptake. All allergens correctly identified in this LLNA study wing Balb/c mice. These results suggest that LLNA wing Balb/c mice could be a useful method for screening the allergenic potential of chemicals. The expression of IL-2 mRNA was slightly increased in draining auricular lymph node cell of the mice treated with TDI and HCA by RT-PCR. However the IL-2 levels in DNCB and SLS of treated animals were not significantly changed.

• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.39-48
• /
• 2002

Linear and crosslinked polyurethane dispersions were synthesized with 2,4-toluene diisocyanate, dimethylol propionic acid, polyoxypropylene glycol and polyoxypropylene glycerin. The structures of these polyurethanes were characterized by $^1H-NMR$ and FT-IR and the properties were measured with DSC, TGA, Instron and AFM etc. In case of linear polyurethane dispersion, the particle size, viscosity and glass transition temperature of polyurethanes increased with higher molecular weight of polyol and the degree of crosslinking. The crosslinked polyurethanes which contains more than 15% of polyoxypropyleneglycerin didn't from dispersion, when mixtures by polyoxypropyleneglycol and polyoxypropyleneglycerin were used as polyols. Thus, we synthesized crosslinked polyurethanes with 5%, 8%, 13% and 15% weight percents of polyoxypropylene glycerin as polyol mixtures.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.2
• /
• pp.140-148
• /
• 2012

Objectives: This study was performed to provide harmonized guidelines on health and environmental classification criteria and its results of chemicals in Korea. Methods: Firstly, The history of GHS implementation in UN and Korea was reviewed. Secondly, the differences in classification criteria on health and environmental hazards among UN GHS and two Korean government agencies, Korea Ministry of Employment and Labour (KMoEL) and Korea Ministry of Environmental (KMoE). The classification results were compared between classifications of Korea Occupational Safety and Health Agency (KOSHA) based on KMoEL and classifications of Korea National Institute of Environmental Research (KNIER) based on KMoE. Finally, an inter-agency harmonization on the classification criteria and the results was suggested by comparing the classification results of 5 chemicals; Benzene, carbon disulfide, formaldehyde, toluene-2,4-diisocyanate, and trichloroethylene. Results: KMoEL and KMoE revised regulations on chemical management and published a Notices on GHS classification criteria according to UN GHS document. However, the hazard to the ozone layer contained in the latest edition of UN GHS document published in 2011 was not included yet. The differences in classifications of 5 chemicals between KOSHA and KNIER were 36.2% in health hazards and 23.4% in environmental hazards, respectively. In conclusion, we suggested that a new revision be needed to include newly contained hazard and inter-agency working party be organized to harmonize classification results.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.2
• /
• pp.139-152
• /
• 2009

According to the third study on the distribution of chemical substances carried out by the Department of Environment in 2006, there were a total of 900 chemical substances whose respective annual usage amount exceeded 1,000 tons and, among them, 90 substances belonged to the 168 hazardous substances requiring management(53.6%). The work-related illnesses caused by hazardous substances requiring management in Korea between $1992{\sim}2005$ can be classified into four groups depending on the type of the chemical substances. These four groups are 23 organic substances including benzene, 12 metals including lead, 3 acids and bases including hydrogen chloride, and 6 gaseous substances including carbon monoxide. These hazardous substances requiring management were again classified depending on the threshold limit values. The chemicals whose TLV was lower than or equal to 0.005 ppm included 4 organic substances including methylene bisphenyl isocyanate and toluene-2,4-diisocyanate (TDI). The chemicals whose TLV was larger than 51 ppm included 22 organic substances including diethyl ether and 1,2-dichloroethylene. When we classified these hazardous substances requiring management according to the categories of GHS health hazards, we found that isobutyl acetate and magnesium oxide didn't belong to the 13 health hazard categories. Among the substances whose TLV is set and whose annual usage amount is more than 0.1 million ton, we recommended 12 chemical species including 4,4'-Methylenedianiline as new hazardous substances requiring management. All the recommended substances were found to be hazardous when we classified their health hazards.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.5
• /
• pp.580-587
• /
• 2017

Woodfiber insulation board can be considered as a one of the key material for low energy consumption, comfortable and safety construction of residential space because of its eco-friendly and high thermal insulation performance. This study was carried out to investigate the formaldehyde (HCHO) total volatile organic compounds (TVOC) emission properties and combustion shapes by flame test of low density fiberboards (LDFs) prepared with different adhesives. HCHO TVOC emission and combustion properties of LDFs prepared by melamine urea formaldehyde (MUF), phenol formaldehyde (PF), emulsified methylene diphenyl diisocyanate (eMDI) and latex resin adhesives were measured by desiccator method, 20 L chamber method, and flame test, respectively. As results, LDFs manufactured by MUF, eMDI and latex resin adhesives satisfied the Super $E_0$ grade of HCHO emission performance except PF resin. Furthermore, TVOC emission of all LDFs were satisfied the Korean indoor air quality standard (below $400{\mu}g/m^2{\cdot}h$). Especially, LDF with eMDI resin adhesive showed the lowest HCHO and TVOC emissivity, that $0.14mg/{\ell}$, $12{\mu}g/m^2{\cdot}h$, respectively. However, eMDI emitted the small amount ($3{\mu}g/m^2{\cdot}h$) of toluene in VOC components. In the flame test, LDF with MUF resin adhesives showed the most favorable shape after flame test compare to LDFs prepared other adhesives. Based on HCHO and TVOC emission, and combustion shapes, MUF resin adhesive may be recommended to prepare LDF for insulation purpose.