• 한국잠사곤충학회지
• /
• 제39권1호
• /
• pp.12-16
• /
• 1997

Effects of calcium on mulberry growth and freezing tolerance were examined by water culture. Calcium was supplied by folar spray with the levels of 0, 5, and 40 ppm. Muberry stems developed by 130 cm at Ca2+ 40ppm, 82 cm at Ca2+ 5 ppm and 23 cm at Ca2+ 0 ppm. Muberry roots also developed vigorously at Ca2+ 40 ppm, but did poorly at Ca2+ 5 ppm and changed to brown in color, and died becoming necrosis at Ca2+ 0 ppm. Content of calcium in leaves and barks were increased at Ca2+ 40 ppm compared with at Ca2+ 5 ppm. Total sugar, RNA, proline and phospholipid at Ca2+ 40 ppm were also more increased than those at Ca2+ 5 ppm. Mulberry stems grown at Ca2+ 40 ppm showed a sufficient tolerance at -10 for 24 hours while stems grown at Ca2+ 5 ppm did a weak tolerance at the same conditions.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권2호
• /
• pp.73-78
• /
• 2005

The management of technological systems will become increasingly complex. Safe and reliable software operation is a significant requirement for many types of system. So, with software fault tolerance, we want to prevent failures by tolerating faults whose occurrences are known when errors are detected. This paper presents a fault location algorithm for single-phase-to-ground faults on the teed circuit of a parallel transmission line using software fault tolerance technique. To find the fault location of transmission line, we have to solve the 3rd order transmission line equation. A significant improvement in the identification of the fault location was accomplished using the N-Version Programming (NVP) design paradigm. The delivered new algorithm has been tested with the simulation data obtained from the versatile EMTP simulator.

• Archives of Pharmacal Research
• /
• 제13권1호
• /
• pp.38-42
• /
• 1990

The present study was undertaken to determine the inhibitory effects of cholane compounds, unsodeoxycholic acid (UDCA) and chenodeoxycholic acid (CDCA) on the development of morphine-induced tolerance and physical dependence, and also to determine the hepatic glutathione contents. UDCA and CDCA inhibited the development of morphine-induced tolerance and physical dependence significantly. UDCA inhibited the hepatic glutathione decrease induced by morphine multiple injections, while this effect was not observed in CDCA treated mice. It was throught that the inhibitory effects of hepatic glutathione decrease in morphine-treated mice by UDCA and CDCA showed a tendency of inhibitory effects of development of morphine tolerance and dependence.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.601-607
• /
• 2010

For commercial success of emerging service robots, the fault tolerant technology for system reliability and human safety is crucial. Traditionally fault tolerance methods have been implemented in application level. However, from our studies on the common design patterns in fault tolerance, we argue that a framework-based approach provides many benefits in providing reliability for system development. To demonstrate the benefits, we build a framework-based fault tolerant engine for OPRoS (Open Platform for Robotic Services) standards. The fault manager in framework provides a set of fault tolerant measures of detection, isolation, and recovery. The system integrators choose the appropriate fault handling tools by declaring XML configuration descriptors, considering the constraints of components and operating environment. By building a fault tolerant navigation application from the non-faulttolerant components, we demonstrate the usability and benefits of the proposed framework-based approach.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.433-440
• /
• 1998

In order to select probiotics with a high survival rate in gut and the growth inhibition of virulent pathogens to human beings or animals, we have examined a variety of microorganisms to assess the acid, bile, and pancreatic tolerance and the growth inhibition of E. colt O8 and Salmonella choleraesuis ATCC 8391. Lactobacillus acidophilus KCTC 3155 was shown to inhibit the growth of E. coli and Salmonella dramatically within 24 h of incubation, although it was vulnerable to the exposure of bile acids. Bacillus polyfermenticus showed a good growth inhibition against E. coli, with a moderate acid and bile tolerance, while Clostridium butyricum KCTC 1786 inhibited the growth of E. coli and Salmonella slightly with a good bile tolerance. However, Saccharomyces cerevisiae KCTC 7928 and Aspergillus oryzae KCTC 6075 did not inhibit the growth of E. coli and Salmonella, suggesting that these microorganisms can be used as the sources of nutritional suppliment rather than as probiotics itself.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.905-913
• /
• 2003

Generally, most of optimization have been performed with fixed sizes and variables. But, the optimum value considering tolerance of design variables and material properties, might be useless owing to exist in infeasible region. It is needed that the tolerance of design variables and material properties is considered for a real design problem. A deterministic optimal solution can be in the feasible region by performing robust optimization considering tolerance. In the paper, robust design is suggested to gain an optimum insensitive to variation of design variables and it is applied for optimization problem of caliper disc brakes for vehicles.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.297-299
• /
• 2006

Many distributed applications is developed in various environment such as operating system, software platform. So, they exhibit different types of system behavior, status, during the course of their operation. Each such behavior may have different functional and non-functional requirements. Therefore, many distributed application need to fault-tolerance solution. Personal robot provide various service or application. Because personal robot has many application or service, it need to fault-tolerance architecture. A flexible architecture is required to provide dependability. In this paper, it is suggested a fault-tolerant architecture for module-based personal robot with module fault-tolerance, service fault-tolerance.

• Fisheries and Aquatic Sciences
• /
• 제3권2호
• /
• pp.88-96
• /
• 2000

The present study estimated the variation of early survival of chum salmon families with respect to temperature and size after transfer to seawater. Heritability for seawater tolerance of half-sib families was also estimated at 45 days after hatching. Gametes were collected from 6 male and 18 female chum salmon to make 18 paternal half-sib families. Seawater tests were carried out at 3, 7 and $12^{\circ}C$ of $32\%$ seawater and compared with freshwater. Survival was significantly affected by seawater temperature. The highest seawater tolerance was obtained in 45-day old chum salmon at $7^{\circ}C$ seawater and the lowest seawater tolerance was obtained at $3^{\circ}C$. Overall survivals in seawater tolerance at $32\%$ varied among families. There were significant variance in fry survival among females (P=0.0001), and among males (P=0.0001). The heritabilities of survival in seawater in chum salmon were estimated to be 0.32-0.34 for the sire components at 45 days after hatching in 1998.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.43-48
• /
• 2014

The flexible pedestrian legform impactor(Flex-PLI) consisting of a flexible femur and tibia will be tested for pedestrian protection by global technical regulation(GTR) within the next couple of years as a replacement for the existing transport research laboratory(TRL) legform impactor. In this study, a computer aided engineering(CAE) model was used to perform the effect analysis of each injury with regard to the changes in tolerance factors with the baseline results without tolerance. The tolerance factors were the height of impactor from ground reference line, initial velocity of impactor and rotation of impactor.

• 한국정밀공학회지
• /
• 제27권12호
• /
• pp.75-83
• /
• 2010

Every mechanical part for mass production has dimensions with tolerances in engineering drawing. Tolerance is given to guarantee assemble parts together satisfying functional requirements and dimensional constraints. Tolerance is essential factor for standardization of parts or assembly and has huge influence on manufacturing cost. It will be desirable to have tolerances as broad as possible for minimizing manufacturing cost. This paper describes tolerance analysis of u-joint assembly that is a part of automobile steering system. Within the range of tolerances of parts, accumulated effect is estimated by arithmetic calculation, probability theory and Monte carlo simulation. Each result is compared to investigate the method for increasing productivity.