• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1387-1395
• /
• 1994

Re-hydration properties of heated and ground CaO-SiO2-H2O system were studied under hydrothermal condition in order to examine the possibility of recycling ALC waste as raw materials of ALC. Powder of calcium silicate hydrates and ALC waste without heat treatment did not show further hydration while those of heat-treated at proper temperature showed re-hydration properties under hydrothermal condition. The lath-like shape of initially synthesized tobermorite was gradually turned into small debris during heating and plate-like tobermorite was crystallized during re-hydration of the heated powders. Heated and ground ALC waste could be added to natural raw mix for ALC at the ammount up to 20% with increased compressive strength and up to 30% with slightly decreased compressive strength. The optimum heating temperature of ALC for recycling was about 50$0^{\circ}C$.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.375-376
• /
• 2010

본 연구는 WCP 대체율 및 오토클레이브 양생시간 변화에 따른 경량기포콘크리트의 미세구조 및 광물분석을 통한 화학적 특성을 검토하였다. 경화체의 미세구조 분석으로부터 수열 반응 후 WCP 대체율 및 양생시간에 관계없이 반응하여 판상형, 섬유형의 결정 구조물의 수화물을 형성한 것을 확인하였다. 또한 Tobermorite(C5S6H5)는 WCP의 구성성분인 결정질 Quartz의 반응에 의한 것으로 추정된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.461-464
• /
• 2005

As the research on the development of the lightweight concrete block by the hydro-thermal synthetic reaction mixed with the calcareous material and bottom ash that is used less among siliceous material, we studied on the physical and chemical characteristics in the changes of hydro-thermal synthetic reaction of lightweight concrete block compounded with the PP fiber to increase flexural toughness and to prevent fragility failure. The results of the experiment are as follow. According to the increase of hydro-thermal synthetic reaction and the fiber content, compressive and flexural strength increased. Despite the changes of the hydro-thermal synthetic reaction time, tobermorite was produced on each of the specimens similarly. However, the phase of tobermorite was changed in accordance with the changes of time. Also, $CaCo_{3}$ appeared on the surface of the 9 hour hardened specimen.

• 한국세라믹학회지
• /
• 제18권3호
• /
• pp.147-151
• /
• 1981

On the calcium silicate hydrothermal reaction, the effect of NaOH and KOH Studied. Forincreasing the yield of fibers and to promote crystal growth, Rotary autoclae has been used. By addition NaOH solution, approximately 150${\mu}{\textrm}{m}$ of pectolite was grown. By addition KOH solution, approximately 30${\mu}{\textrm}{m}$ of 11$\AA$-Tobermorite was grown under the conditon of 21$0^{\circ}C$ 10 days reaction. These results indicate that 11$\AA$-Tobermorite was stabilized by KOH over a wide Temperature and composition range.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.117-118
• /
• 2011

The acid stained agents are able to make remarkably thin colored layers on concrete surfaces and have simple processes for applying them comparably. This study has examined properties of the reaction to acid stained agent and cement hydrate. We've observed that the C-S-W autoclave cured specimens contain less Calcium Hydroxide than the others and create tobermorite of C-S-H system crystalline and concluded that the reactions of acid stained agent become slowdown under C-S-W and cause light colors of specimens.

• Advances in concrete construction
• /
• 제4권4호
• /
• pp.305-317
• /
• 2016

Porous materials such as concrete could be subjected to aggressive ions transport. Durability of cement paste is extremely depended on water and ions penetration into its interior sections. These ions transport could lead different damages depending on reactivity of ions, their concentrations and diffusion coefficients. In this paper, chloride diffusion process in cement hydrates is simulated at atomistic scale using molecular dynamics. Most important phase of cement hydrates is calcium silicate hydrate (C-S-H). Tobermorite, one of the most famous crystal analogues of C-S-H, is used as substrate in the simulation model. To conduct simulation, a nanopore is considered in the middle of simulation cell to place water molecules and aggressive ions. Different chloride salts are considered in models to find out which one is better for calculation of the transport properties. Diffusion coefficients of water molecules and chloride ions are calculated and validated with existing analytical and experimental works. There are relatively good agreements among simulation outputs and experimental results.

• 대한화학회지
• /
• 제48권2호
• /
• pp.129-136
• /
• 2004

타이테늄과 [타이테늄 + 나트륨 (칼륨)]으로 치환된 11${\AA}$의 토버모라이트 고체가 180 $^{\circ}C$의 수열반응 조건하에서 합성되었고, 이 화합물은 Fe$^{2+},\;Zn^{2+},\;Cd^{2+},\;Pb^{2+}$과 같은 중금속 양이온에 대해서 양이온 교환 성질을 보였다. 이 고체에 흡착된 중금속 양이온은 Fe$^{2+}>Zn^{2+}>Cd^{2+}>Pb^{2+}$의 순서로 그 양이 감소하였고, 10% [타이테늄 + 칼륨]으로 치환된 토버모라이트가 최대값을 보였다. 총 양이온 교환능은 10% [타이테늄 + 칼륨]으로 치환된 토버모라이트와 타이테늄으로만 치환된 토버모라이트에 대해서 각각 71에서 89 meq/100 g와 50에서 56 meq/100 g로 측정되었다. 이 결과는 10% [타이테늄 + 칼륨]치환이 비치환 토버모라이이트 보다 2.4배 이상의 양이온 교환능이 있음을 보여준다. 이는 교환체의 활성자리 수의 증가에 의한 것이다. 합성된 토버모라이트의 격자구조로의 타이테늄과 [타이테늄 + 나트륨 (칼륨)]의 포함은 각각 Ti$^{4+}\;{\Leftrightarrow}\;2Ca^{2+}$와 Ti$^{4+}+2Na^+(K^+)\;{\Leftrightarrow}\;3Ca^{2+}$의 치환에 의한 것이다. 합성과정 중 고체의 결정 격자로의 타이테늄과 [타이테늄 + 나트륨 (칼륨)]의 포함에 관한 메커니즘과 이들 고체에 의한 중금속 양이온 흡수가 연구되었다.

• 한국결정성장학회지
• /
• 제14권5호
• /
• pp.204-210
• /
• 2004

국내 화력발전소에서 배출되는 석탄회 중에서 비산재의 재활용률은 점점 증가하고 있으나, 바닥재는 현재 전량 매립되고 있는 실정이다. 이에 본 연구에서는 바닥재로부터 제올라이트를 합성함으로써 바닥재의 고부가가치 물질로의 전환 가능성을 알아보았다. 실험을 위해 분쇄한 바닥재를 반응온도$(80,{\;}120,{\;}150^{\circ}C)$ 및 NaOH농도(1~5M)를 변화시키면서 알칼리 수열합성법으로 반응시킨 결과, NaPl, hydrxoy-sodalite, tobermorite 등이 생성되었다. 특히, $120^{\circ}C$ 이하의 온도 및 2M이하의 NaOH농도에서 양이온교환능력이 우수한 것으로 알려진 NaPl이 높은 결정성을 갖는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.75-78
• /
• 2007

The recycling program about waste concrete is being progressed to national research. But research on waste concrete powder which is occurred in control process of concrete powder is not enough. Waste concrete powder includes in $SiO_2,\;Al_2O_3$, and CaO so that the create of tobermorite is possibile through Hydrothermal Syntesis Reaction. Tobermorite have an advantage of high strength, sulphuric acid resistance and the lower drying shrinkage. Accordingly, this study investigate in properties of light-weight foamed concrete made with waste concrete powder. As a results, light-weight foamed concrete made with waste concrete powder is the higher than stone powder sludge of density and porosity, and the tower compressive strength. Therefore, it is thought that light-weight foamed concrete using waste concrete powder is possible.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.121-125
• /
• 2009

The recycling of waste concrete is increasing for the environment protection and the shortage of aggregate according to the large scale construction project in Korea. The more manufacturing high quality recycled aggregate is produced, the more waste concrete powder generated from the manufacture process of recycled aggregate, and the consideration about the recycling of waste concrete powder is need. Waste concrete powder was used for the partial replacement of silica powder, which is a main raw material for the manufacture of autoclave foamed concrete. According to the results of research, the slurry density, flow, compressive strength mainly depend on the replacement ratio of particle size and waste concrete powder. At the SEM analysis, the more high-waste concrete powder was the less there are generated tobermorite. But we conclude that it is possible to replace WCP as silica source in the manufacture of the lightweight foamed concrete.