• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.60-66
• /
• 2021

The core is extracted through drilling and used to evaluate the feasibility of developing mineral resources. To extract the core, a bit is installed in the forefront of the drilling device for drilling. Here, the drill bit receives stress due to direct friction against the ground. In addition, a bit appropriate for the given ground condition should be used due to the possibility of damaging a bit as a result of friction. This paper used a current bit model based on an impregnated bit and analyzed a new bit model that uses a stiffener of similar/disparate materials. The hardness and deflective strength were then evaluated by modeling the shape of impregnated bit through a calculation based on a theoretical formula. Through FEM analysis of the existing model and the new model, the stress and strain calculation results were optimized to minimize the stress and strain with a stress of 1.92 × 107 Pa and a strain of 9.6× 10-5 m/m.

• ETRI Journal
• /
• v.24 no.4
• /
• pp.280-289
• /
• 2002

In this work, we present a novel approach to the bit allocation problem that aims to minimize overall distortion subject to a bit rate constraint. The optimal solution can be found by the Lagrangian method with dynamic programming. However, the optimal bit allocation for block-based interframe coding is practically unattainable because of the interframe dependency of macroblocks caused by motion compensation. To reduce the computational burden while maintaining a result close to the optimum, i.e., near optimum, we propose an alternative method. First, we present a partitioned form of the bit allocation problem: a "frame-level problem" and "one-frame macroblock-level problems." We show that the solution to this new form is also the solution to the conventional bit allocation problem. Further, we propose a bit allocation algorithm using a "two-phase optimization technique" with an interframe dependency model and a rate-distortion model.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.3
• /
• pp.277-292
• /
• 2012

This paper presents the fundamental study on drag force of shield TBM cutter bit by scaled model test. Several theoretical analyses of the drag force of cutter bit have been studied. However, there are still some difference between the theoretical approaches and actual drag bit capacity. In order to study the drag forces of shield TBM cutter bit, the scaled model tests are carried out and analyzed. The results obtained from scaled model tests are compared with the existing theoretical equations. It is highly expected that the results of this study will be very essentially useful to design and develope the TBM cutterhead.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.243-251
• /
• 2012

Under the power-based capture model, a transmission is successfully received at the destination, even in the presence of other transmissions and background noise, if the received signal-to-interference-plus-noise ratio exceeds a capture threshold. We evaluate the spectral efficiency of simple multi-user channels by combining the basic capture model with a communication-theoretic model. The result is a more refined capture model that incorporates key system design parameters (such as achievable bit rate, target bit error rate, channel bandwidth, and modulation signal constellations) that are absent from the basic capture model. The relationships among these parameters can serve as a tool for optimizing the network performance.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1314-1320
• /
• 2019

In this paper, we propose a new method for optimizing bit operations and applying them to DNN(Deep Neural Network) in software environment. As a method for this, we propose a packing function for bitwise optimization and a masking matrix multiplication operation for application to DNN. The packing function converts 32-bit real value to 2-bit quantization value through threshold comparison operation. When this sequence is over, four 32-bit real values are changed to one 8-bit value. The masking matrix multiplication operation consists of a special operation for multiplying the packed weight value with the normal input value. And each operation was then processed in parallel using a GPU accelerator. As a result of this experiment, memory saved about 16 times than 32-bit DNN Model. Nevertheless, the accuracy was within 1%, similar to the 32-bit model.

• The Journal of the Korea Contents Association
• /
• v.11 no.8
• /
• pp.459-467
• /
• 2011

BIS(Bus Information Systems) supplies the bus arrived time information for users in using BIT(Bus Information Terminal) installed on the bus stop. BIT is the device using peoples directly. So, BIT need a quick response when it flew. These are an important factor in the strategy of the BIS maintenance. BIT need a maintenance cost to operate smoothly. So, Suppose that commercial advertisement can be displayed on BIT screen in this study. And we researched an advertisement rates of the optimum level in using Contingent Valuation Method. In addition, we analyzed a characteristic of user's depending on each time using multinomial Logit Modeling method, and studied for BIT operation and ad. displaying strategy considered user's sex, ages and using times.

• Journal of Internet Computing and Services
• /
• v.8 no.5
• /
• pp.141-150
• /
• 2007

This paper proposes new Steganographic model for VoIP that has very effective method using low bit encoding. Most of Steganographic models using Low bit Encoding have two disadvantages; one is that the existence of hidden secret message can be easily detected by auditory, the other is that the capacity of stego data is low. To solve these problems, this method embed more than one bit in inaudible range, so this method can improve the capacity of the hidden message in cover data. The embedding bit position is determined by using a pseudo random number generator which has seed with remaining message length, so it is hard to detect the stego data produced by the proposed method. This proposed model is able to use not only to communicate wave file with hidden message in VoIP environment but also to hide vary information which is user basic information, authentication system, etc.

• ETRI Journal
• /
• v.38 no.1
• /
• pp.185-194
• /
• 2016

In this paper, a novel rate control scheme for low delay video coding of High Efficiency Video Coding (HEVC) is proposed. The proposed scheme is developed by considering a new temporal prediction structure of HEVC. In the proposed scheme, the relationship between bit rate and quantization step is exploited firstly to formulate an accurate quadratic rate-quantization (R-Q) model. Secondly, a method of determining the quantization parameters (QPs) for the first frames within a group of pictures is proposed. Thirdly, an accurate frame-level bit allocation method is proposed for HEVC. Finally, based on the proposed R-Q model and the target bit allocated for the frame, the QPs are predicted for coding tree units by using rate-distortion (R-D) optimization. We compare our scheme against that of three other state-of-the-art rate control schemes. Experimental results show that the proposed rate control scheme can increase the Bjøntegaard delta peak signal-to-noise ratio by 0.65 dB and 0.09 dB on average compared with the JCTVC-I0094 and JCTVC-M0036 schemes, respectively, both of which have been implemented in an HEVC test model encoder; furthermore, the proposed scheme achieves a similar R-D performance to Wang's scheme, as well as obtaining the smallest bit rate mismatch error of all the schemes.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.9
• /
• pp.84-90
• /
• 1997

We proposed a new bit-rate control algorithm to improve MPEG-2 video software encoder. Bit-rate Control plays an improtant role in picture quality of MPEG-2 encoder. To achieve better encoding performance such as controlling picture quality and using bity properly, we proposed a MPEG-2 bit-rate control algorithm using linear average Step-Size. Using a benchmark Program, we compared our algorithm with MPEG-2 Test Model 5. Our proposed algorithm showed better Bit-Rate Control with respect to used bits, picture quality.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1078-1085
• /
• 2011

In this paper, we analyze the relationship between energy per bit and the data rate with the variation of the system bandwidth. A existing power model is mathematical model to express power consumption of each device. In this paper, we have to investigate the system level energy model for the RF front-end of a wireless transceiver. Also, the effects of the signal bandwidth, PAR, date rate, modulation level, transmission distance, specific attenuation of frequency band, and the signal center frequency on the RF front-end energy consumption and system capacity are considered. Eventually, we analyze the relationship between energy per bit and the data rate with the variation of the system bandwidth so that we simulate the minimum energy per bit in the several Gbps data rate using Shannon capacity theory.