• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1675-1677
• /
• 1998

It is currently increasing to use surge protection devices in the protection of various electronic circuits from the transient overvoltages such as lightning strikes and switching surges. For this reason, the simulation methods, which can easily predict the protection performance of the devices, are strongly required in order to design the adequate surge protection circuits in lightning surge cut-off performance and economic aspects. This paper deals with ZnO varistor modeling method for designing a surge protection circuit and suggests the Pspice simulation model which takes the characteristic of varying clamping voltage into consideration during the time-to-crest, in range of $8{\sim}30{\mu}s$, of surge current applied to a ZnO varistor. The ZnO varistor Pspice simulation data introduced in this paper has produced almost same values as the measured results experimentally.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.101-112
• /
• 1999

In this paper variable bit rate VBR Moving Picture Experts Group (MPEG) coded full-motion video traffic is modeled by a nonlinear time-series process. The threshold autoregressive (TAR) process is of particular interest. The TAR model is comprised of a set of autoregressive (AR) processes that are switched between amplitude sub-regions. To model the dynamics of the switching between the sub-regions a selection of amplitude dependent thresholds and a delay value is required. To this end, an efficient and accurate TAR model construction algorithm is developed to model VBR MPEG-coded video traffic. The TAR model is shown to accurately represent statistical characteristics of the actual full-motion video trace. Furthermore. in simulations for the bit-loss rate actual and TAR traces show good agreement.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3163-3172
• /
• 2010

In this work, a novel method to synthesis of an acrylic superabsorbent hydrogel was reported. In the two stage hydrogel synthesis, first copolymerization reaction of acrylonitrile (AN) and acrylamide (AM) monomers using ammonium persulfate (APS) as a free radical initiator was performed. In the second stage, the resulted copolymer was hydrolyzed to produce carboxamide and carboxylate groups followed by in situ crosslinking of the polyacrylonitrile chains. The results from FTIR spectroscopy and the dark red-yellow color change show that the copolymerization, alkaline hydrolysis and crosslinking reactions have been do take place. Scanning electron microscopy (SEM) verifies that the synthesized hydrogels have a porous structure. The results of Brunauer-Emmett-Teller (BET) analysis showed that the average pore diameter of the synthesized hydrogel was 13.9 nm. The synthetic parameters affecting on swelling capacity of the hydrogel, such as AM/AN weight ratio and hydrolysis time and temperature, were systematically optimized to achieve maximum swelling capacity (330 g/g). The swollen gel strength of the synthesized hydrogels was evaluated via viscoelastic measurements. The results indicated that superabsorbent polymers with high water absorbency were accompanied by low gel strength. The swelling of superabsorbent hydrogels was also measured in various solutions with pH values ranging from 1 to 13. Also, the pH reversibility and on-off switching behavior makes the hydrogel as a good candidate for controlled delivery of bioactive agents. Finally, the swelling of synthesized hydrogels with various particle sizes obey second order kinetics.

• Molecules and Cells
• /
• v.19 no.3
• /
• pp.445-451
• /
• 2005

Activation-induced cytidine deaminase (AID) is needed for Ig class switch recombination (CSR). We explored the effect of LPS on the expression of AID during B cell differentiation, and the role of AID in IgA isotype expression. In normal spleen B cells, LPS increased AID transcription up to 48 h post-stimulation, i.e. around the time of Ig CSR. TGF-${\beta}1$ and AID were required for IgA expression, and LPS contributed to $TGF{\beta}1$-induced IgA production largely by inducing AID. Interestingly, LPS repressed AID transcription in $sIgA^+$ B cells but still stimulated IgA production mainly by increasing the rate of IgA secretion. Our data indicate that LPS contributes to $TGF{\beta}1$-induced IgA isotype expression in at least two ways: by stimulating AID transcription before CSR and by enhancing the IgA secretion rate after CSR.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.98-104
• /
• 2003

Smoke control in il space 10 m${\times}$3 m floor and 5.4 m high around the stairway of a subway station platform was simulated by using FDS to investigate problems of smoke control in Daegue subway stations. Distributions of temperature and smoke particles, and variation of the number of particles with time for a 200 ㎾ polyurethane fire were compared. It was shown that the purge system fails to remove smoke efficiently and that the extraction system has the highest perfor-mance among the three smoke control systems for the given situations. Simply switching the purge system into extraction mode might improve much the smoke removal performance.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.14 no.4
• /
• pp.256-267
• /
• 2014

An automatic switch among ensembles of clustering algorithms is proposed as a part of the bibliographic big data retrieval system by utilizing a fuzzy inference engine as a decision support tool to select the fastest performing clustering algorithm between fuzzy C-means (FCM) clustering, Newman-Girvan clustering, and the combination of both. It aims to realize the best clustering performance with the reduction of computational complexity from O($n^3$) to O(n). The automatic switch is developed by using fuzzy logic controller written in Java and accepts 3 inputs from each clustering result, i.e., number of clusters, number of vertices, and time taken to complete the clustering process. The experimental results on PC (Intel Core i5-3210M at 2.50 GHz) demonstrates that the combination of both clustering algorithms is selected as the best performing algorithm in 20 out of 27 cases with the highest percentage of 83.99%, completed in 161 seconds. The self-adapted FCM is selected as the best performing algorithm in 4 cases and the Newman-Girvan is selected in 3 cases.The automatic switch is to be incorporated into the bibliographic big data retrieval system that focuses on visualization of fuzzy relationship using hybrid approach combining FCM and Newman-Girvan algorithm, and is planning to be released to the public through the Internet.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.10
• /
• pp.1014-1022
• /
• 2014

In mechatronic systems using electric signals to drive control systems, driving signals including the frequency band of the unwanted signals, such as resonant frequencies and noise frequencies, can affect the accuracy of the controlled system and can cause serious damage to the system due to the resonance phenomenon of the mechatronic system. An LOS (Line of Sight) control unit is used to automatically rotate the gimbal system with a video imaging system generally mounted on modern aerial vehicles. However, it still suffers from natural frequency variation problems due to variations of operational temperature. To prevent degradation in performance, this paper proposes an adaptive filtering technique based on real-time noise analysis and adaptive notch-filtering for LOS control systems, and verifies how our proposed method maintains the LOS stabilization performance. Additionally, this filtering technique can be applied to the image noise filtering of the video imaging system. It is designed to reduce image noises generated by switching circuits or power sources. The details of design procedures of the proposed filtering technique and the experiments for the performance verification are described in this paper.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.31-40
• /
• 2004

Diff-Serv(DS) is a mechanism by which network service providers can offer differing levels of network service to different traffic, in so providing quality of service(QoS) to their customers. Because this mechanism has been deployed just for fixed hosts with the Token Bucket mechanism according to AggF(Aggregate Flow) instead of each flow, DS can not suggest effective usability of traffic resources. In this paper, we use WFQ mechanism for traffic conditioner and scheduling method monitoring the AggF and the results will be used to control the next flows coming in TC. So it will control traffic rate dynamically and suggest efficient usability of bandwidth.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.4
• /
• pp.255-261
• /
• 2005

With the advent of sub-90nm technologies, the system-on-chip (SoC) and system-in-package (SiP) are becoming the trend in delivering low-cost, low-power, and small-form-factor consumer electronic systems running at multiple GHz. The shortened transistor channel length reduces the transistor switching cycles to the range of several picoseconds, yet the time-of-flights of the critical on-chip and off-chip interconnects are in the range of 10 picoseconds for 1.5mm-long wires and 100 picoseconds for 15mm-long wires. Designers realize the bottleneck today often lies at chip-to-chip interconnects and the industry needs a good model to compute the inductance in these parts of circuits. In this paper we propose a new method for extracting accurate equivalent inductance circuit models for SPICE-level circuit simulations of system-on-chip (SoC) and system-in-package (SiP) designs. In our method, geometrical meshes are created and numerical methods are used to find the solutions for the electromagnetic fields over the fine meshes. In this way, multiple-GHz SoC and SiP designers can use accurate inductance modeling and interconnect optimization to achieve high yields.

• Journal of Industrial Technology
• /
• v.14
• /
• pp.127-140
• /
• 1994

This study is concerned with the accuracy and the patterns when different methods was used in interpolation task. Although 3 methods employed the same modality for input (visual) and for output (manual responding), they differed in central processing, which method 1 is relatively more tendency of verbal processing, method 2 is realtively more tendency of spatial processing and method 3 needed a number of switching code (verbal/spatial) performing task. Split-plot design was adopted, which whole plot consisted of methods (3), orientations (horizon, vertical), base-line sizes (300, 500, 700 pixels) and split plot consisted of target locations (1-99). The results showed the anchor effect and the range effect. Method 2, method 3 and method 1 that order was better accuracy. ANOVA showed that the accuracy was significantly influenced by the method, the location of target, and its interactions ($method{\times}location$, $size{\times}location$). Analysis of error data, response time and frequency of under, just, over estimate indicated that a systematic error pattern was made in task and methods changed not only the performance but also the pattern. The results provided support for the importance of the multiple resources theory in accounting for S-C-R compatibility and task performance. They are discussed in terms of multiple resources theory and guidelines for system design is suggested by the S-C-R compatibility.