• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.395-403
• /
• 2006

This paper has proposed a new dead time compensation method for a voltage-fed PMW inverter. In the voltage-fed PMW inverter, a voltage distortion is generated by the dead time effect and the nonlinear characteristics of the switching devices. Especially, the distorted voltage causes 5th and 7th harmonics in the stationary phase currents, and 6th harmonic in the synchronous phase currents. As a result, the integrator output of the synchronous PI current regulator has the ripple corresponding to six times of the inverter output frequency. In this paper, the signal of the integrator output of the d-axis current regulator is used as the control signal for the dead time compensation. The experimental and simulation results are presented to verify the validity of the proposed method.

• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.371-376
• /
• 2001

Since continuous media such as video and audio data are displayed within a certain time constraint, their computation and manipulation should be handled under limited condition. Traditional real-time scheduling algorithms cold be directly applicable, because they are not suitable for multimedia scheduling applications which support many clients at the same time. Rate Regulating Proportional Share Scheduling Algorithm based on the stride scheduler is a scheduling algorithm considered the time constraint of the continuous media. The stride schedulers, which are designed to general tasks, guarantee the fairness of resource allocation and predictability. The key concept of RRPSSA is a rate regulator which prevents tasks from receiving more resource than its share in a given period. But this algorithm loses fairness which is a strong point of the stride schedulers, and does not show graceful degradation of performance under overloaded situation. This paper proposes a new modified algorithm, namely Modified Proportional Share Scheduling Algorithm considering the characteristics of multimedia data such as its continuity and time dependency. Proposed scheduling algorithm shows graceful degradation of performance in overloaded situation and it reduces the scheduling violations up to 70% by maintaining the fair resource allocation. The number of context switching is 8% less than RRPSSA and the overall performance is increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.5C
• /
• pp.445-453
• /
• 2002

We propose a cell-multiplexing scheme for the real-time communication service in ATM network and a new service discipline guarantee end-to-end delay based on pseudo-isochronous cell switching. The proposed scheme consists of two level frame hierarchy, upper and lower frame, which is used to assign the bandwidth and to guarantee the requested delay bound, respectively. Since the proposed algorithm employs two level frame hierarchy, it can overcome the coupling problem which is inherent to the framing strategy. The proposed scheme consists of two components, traffic controller and scheduller, as the imput traffic description model and regulates the input traffic specification. The function of the traffic controller is to shape real-time traffic to have the same input pattern at every switch along the path. The end-to-end delay is bounded by the scheduller which can limit the delay variation without using per-session jitter controllers, and therefore it can decrease the required buffer size. The proposed algorithm can support the QoS's of non-real time traffic as well as those of real time traffic

• Journal of Internet Computing and Services
• /
• v.3 no.2
• /
• pp.15-26
• /
• 2002

Since multimedia data such as video and audio data are displayed within a certain time constraint, their computation and manipulation should be handled under limited condition. Traditional real-time scheduling algorithms could net be directly applicable, because they are not suitable for multimedia scheduling applications which support many clients at the same time. Rate Regulating Proportional Share Scheduling Algorithm is a scheduling algorithm considered the time constraint of the multimedia data. This scheduling algorithm uses a rate regulator which prevents tasks from receiving more resource than its share in a given period. But this algorithm loses fairness, and does not show graceful degradation of performance under overloaded situation, This paper proposes a new modified algorithm. namely Modified Proportional Share Scheduling Algorithm considering the characteristics of multimedia data such as its continuity and time dependency, Proposed scheduling algorithm shows graceful degradation of performance in overloaded situation and the reduction in the number of context switching, Furthermore, a new evaluation method is proposed which can evaluate the flexibility of scheduling algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.1-7
• /
• 2002

Since multimedia data such as video and audio data are displayed within a certain time constraint, their computation and manipulation should be handled under limited condition. Traditional real-time scheduling algorithms could not be directly applicable, because they are not suitable for multimedia scheduling applications which support many clients at the same time. Rate Regulating Proportional Share Scheduling Algorithm is a scheduling algorithm considered the time constraint of the multimedia data. This scheduling algorithm uses a rate regulator which prevents tasks from receiving more resource than its share in a given period. But this algorithm loses fairness, and does not show graceful degradation of performance under overloaded situation. This paper proposes a new modified algorithm, namely Modified Proportional Share Scheduling Algorithm considering the characteristics of multimedia data such as its continuity and time dependency. Proposed scheduling algorithm shows graceful degradation of performance in overloaded situation and the reduction in the number of context switching. Furthermore, a new evaluation method is proposed which can evaluate the flexibility of scheduling algorithm.

• Korean Journal of Materials Research
• /
• v.12 no.3
• /
• pp.200-204
• /
• 2002

We fabricated TMR devices which have double oxidized tunnel barrier using plasma oxidation method to form homogeneously oxidized AlO tunnel barrier. We sputtered 10 $\AA$-bottom Al layer and oxidized it by varying oxidation time for 5, 10, 20 sec. Subsequent sputtering of 13 $\AA$ - Al was performed and the matallic layer was oxidized for 120 sec. The electrical resistance changed from 700$\Omega$ to 2700$\Omega$ with increase of oxidation time, while variation of MR ratio was little spreading 27~31% which is larger than that of TMR device of ordinary single tunnel barrier. We calculated effective barrier height and width by measuring I-V curves, from which we found the barrier height was 1.3~1.5 eV, sufficient for tunnel barrier, and the barrier width(<16.2 $\AA$) was smaller than that of directly measured value by the tunneling electron microscopy. Our results may be caused by insufficient oxidation of Al precursor into $Al_2O_3$. However, double oxidized tunnel barriers were superior to conventional single tunnel barrier in uniformity and density. We found that the external magnetic field to switch spin direction of ferromagnetic layer of pinned layer breaking ferro-antiferro exchange coupling was increased as bottom layer oxidation time increased. Our results imply that we were able to improve MR ratio and tune switching field by employing double oxidized tunnel barrier process.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.3
• /
• pp.175-184
• /
• 2016

Objective: In this study, two types of foot-controlled mouse devices are compared with a hand mouse in the input tasks requiring repetitively switching between a keyboard and a mouse. Background: Foot-controlled mouse devices have been developed for persons with impairments in the mobility of their hands. However, some researchers insisted that the foot-controlled mouse devices could be effectively used by the persons with no limits to their hand mobility. There are needs to investigate the efficiency of the foot-controlled mouse devices, when they are used by the nondisabled people. Method: Participants conducted the input tasks, requiring repetitive switches between a keyboard and a computer mouse. The used computer mouse devices were two types of foot-controlled mouse and a typical hand mouse. Participants performed three types of input task for five days and three types of task performance were measured; the number of completed input tasks within a given practice time, subjective satisfaction level and the time wasted for the mouse control. Results: For five days, the performance of input tasks sharply increased in input tasks by foot-controlled mouse devices rather than a hand mouse. After five days, the level of satisfaction on the foot-controlled mouse devices approached to about 76% of a hand mouse satisfaction level. The control time of the foot-controlled mouse devices also approached to about 109% of a hand mouse control time. Conclusion: After only five-day practice, the input task performance by foot-controlled mouse devices approached to that of a hand mouse. This result may suggest that the foot-controlled mouse devices can be effectively used as an alternative input device for the nondisabled people, if input tasks are easy and enough practice time is provided. Application: The results of this study might help to design foot-controlled mouse devices and to expend the usage of them.

• Korean Journal of Optics and Photonics
• /
• v.21 no.2
• /
• pp.69-73
• /
• 2010

We propose a method to enhance the response time of a twisted nematic liquid crystal (TN-LC) cell using an anisotropic polymer. Polymer networks are formed by the phase separation between a LC and a UV-curable polymer. A TN-LC cell is exposed to UV light after the mixture of LC and anisotropic polymer is injected into the TN-LC cell. As a result, turn-off time of a TN-LC cell can be decreased remarkably without any loss of the transmittance. The turn-off time of a TN-LC cell with pure LC was 16 ms, but those of polymer networked TN-LC cells were 12, 11, and 9 ms when the concentration of the polymer was 3, 5, and 10 wt%, respectively. Moreover, by virtue of the polymer network, the backflow effect and the delay time generated during the turn-off process disappeared.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.90-97
• /
• 2001

A high frequency resonant inverter consisting of iliree unit Half-Bridge serial resommt inverter used as power source of induction heatmg at high frequency is presented in this paper. As a output [Dwer control strategy, sequencial time-sharing gate contml methcd is applied. This methcd is TDM(Time Division Multiplexing), which is broadly used with digital and analog signals transmission in communication system 1be analysis of the proposed circuit is generally described by using the normalized pararmenters. Also, the principle of basic operating and the its characteristics are estimated by the parameters such as switching frequency, load resistance. Also, according to the calculated characteristics value, a method of the circuit design and operating characteristics of the inverter is proposed. This paper proves the validity of theoretical analysis through the Pspice. This proposed inverter show that it can be practically used in future as power source system for induction heating application, DC-DC converter etc. r etc.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.3
• /
• pp.172-177
• /
• 2016

Miller feedback compensation is introduced in a low dropout regulator (LDO) in order to obtain a capacitor-free regulator and improve the fast transient response. The conventional LDO has a limited bandwidth because of the large-size output capacitor and parasitic gate capacitance in the power MOSFET. In order to obtain a stable frequency response without the output capacitor, LDO is designed with resistor-capacitor (R-C) compensation and this is achieved with a connection between the gain-stage and the power MOS. An R-C compensator is suggested to provide a pole and zero to improve the stability. The proposed LDO is designed with the 0.35 μm CMOS process. Simulation testing shows that the phase margin in the Bode plot indicates a stable response, which is over 100^o. In the load regulation, the transient time is within 55 μs when the load current changes from 0.1 to 1 mA.