• Journal of Astronomy and Space Sciences
• /
• 제8권1호
• /
• pp.1-10
• /
• 1991

The dust formation processes in novae are investigated with close attention to recent infrared observations. Using mainly the classical nucleation theory, we have calculated the time scales of dust formation and growth in the environments of novas. Those time scales roughly the typical observations. We have classified the dust-forming novae into three classes according to their explosion properties and the thermodynamic properties of dust grains. Oxygen grains form much later than carbon grains because of their thermodynamic properties. The effect of grain formation to the efficiency of stellar winds to drive the material outward is tested with newly obtained Planck mean values of dust grains.

• Journal of Information Display
• /
• 제10권2호
• /
• pp.62-67
• /
• 2009

To understand panel driving more accurately, the optical properties and their distributions in the LCD panel itself, excluding the backlight, were investigated by measuring the transmittance of a one-dot pixel as a function of time. First, the behavior of time-dependent transmittance was analyzed, and it was found that the off-state TFT was not in a steady state but in a transient state during the holding period. Second, the time average, max, min, and range values of the transmittance curves were examined by varying the common voltage level and gray scale. Third, the analysis of such properties was expanded to cover those of the entire panel in all the gray scales. Lastly, the relationship between their properties and distributions was also investigated along with the contour plots.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.60-64
• /
• 2003

In this study, the inorganic thin-film passivation layer was newly adopted to protect the organic layer from moisture and oxygen. Using the electron beam evaporation system, the various kinds of inorganic thin-films were deposited onto the organic layer and their interface properties between organic and inorganic layer were investigated. In this investigation, the MgO layer showed the most suitable properties, and based on this result, the time dependent emission properties were estimated for the OLED with and without passivation layer. In this experiment, we can see that the time-dependent emission properties of MgO passivated OLED had longer life-time compared to non-passivated OLED. Therefore, we can consider that the MgO thin film is one of the most suitable candidates for the thin-film passivation layer of OLED.

• 충청수학회지
• /
• 제25권3호
• /
• pp.531-541
• /
• 2012

Feynman's operational calculus for noncommuting operators was studied by means of measures on the time inteval. And various stability theorems for Feynman's operational calculus were investigated. In this paper we see the time-dependent stability properties when the operator-valued functions take their values in a separable Hilbert space.

• 대한수학회논문집
• /
• 제23권1호
• /
• pp.67-80
• /
• 2008

Feynman's operational calculus for noncommuting operators was studied via measures on the time interval. We investigate some properties of Feynman's operational calculi which include a variety of blends of discrete and continuous measures in the time dependent setting.

• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.405-429
• /
• 2014

In this paper, it is aimed to determine the structural behavior of suspension bridges considering construction stages and different soil conditions. Bosporus Suspension Bridge connecting the Europe and Asia in Istanbul is selected as an example. Finite element model of the bridge is constituted using SAP2000 program considering existing drawings. Geometric nonlinearities are taken into consideration in the analysis using P-Delta large displacement criterion. The time dependent material strength of steel and concrete and geometric variations is included in the analysis. Time dependent material properties are considered as compressive strength, aging, shrinkage and creep for concrete, and relaxation for steel. To emphases the soil condition effect on the structural behavior of suspension bridges, each of hard, medium and soft soils are considered in the analysis. The structural behavior of the bridge at different construction stages and different soil conditions has been examined. Two different finite element analyses with and without construction stages are carried out and results are compared with each other. At the end of the analyses, variation of the displacement and internal forces such as bending moment, axial forces and shear forces for bridge deck and towers are given in detail. Also, displacement and stresses for bridge foundation are given with detail. It can be seen from the analyses that there are some differences between both analyses (with and without construction stages) and the results obtained from the construction stages are bigger. It can be stated that the analysis without construction stages cannot give the reliable solutions. In addition, soil condition have effect on the structural behavior of the bridge. So, it is thought that construction stage analysis using time dependent material properties, geometric nonlinearity and soil conditions effects should be considered in order to obtain more realistic structural behavior of suspension bridges.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.62-70
• /
• 2005

The nanoindenter and AFM have been used for nanofabrication, such as nanolithography, nanowriting, and nanopatterning, as well as measurement of mechanical properties and surface topology. Nanoscale indents can be used as cells for molecular electronics and drug delivery, slots for integration into nanodevices, and defects for tailoring the structure and properties. Therefore, it is very important to make indents of desired morphology (shape, size and depth). Indents of different shapes can be obtained by using indenters of different geometries such as a cube comer and conical and spherical tips. The depth and size of indents can be controlled by making indentations at different indentation loads. However, in case of viscoplastic viscoelastic materials such as polymethylmethacrylate (PMMA) the time dependent deformation (TDD) should also be considered. In this study, the effect of process parameters such as loading rate and hold-time at peak load on the indent morphology (maximum penetration depth, elastic recovery, transient creep recovery, residual depth pile-up height) of PMMA were studied for hyperfine pattern fabrication.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제25권4호
• /
• pp.345-355
• /
• 2018

This paper looks into phase plane behavior of the solution near the positive steady-state for the system with prey density dependent response functions. The positive invariance and boundedness property of the solution to the objective model are proved. The existence result of a positive steady-state and asymptotic analysis near the positive constant equilibrium for the objective system are of interest. The results of phase plane analysis for the system are proved by observing the asymptotic properties of the solutions. Also some numerical analysis results for the behaviors of the solutions in time are provided.

• 마이크로전자및패키징학회지
• /
• 제31권2호
• /
• pp.23-27
• /
• 2024

본 연구에서는 인쇄 회로 기판(printed circuit board; PCB) 내 prepreg의 점탄성 특성에 따라 발생하는 time-dependent warpage 거동 양상을 유한요소해석 시뮬레이션을 통해 분석하였다. 응력 완화 시험(stress relaxation test)을 통해 prepreg의 정확한 점탄성 물성을 측정하였으며, 이를 시뮬레이션에 반영하여 warpage 분석을 진행하였다. PCB에 반복적인 열 사이클이 가해지는 상황에서 prepreg의 탄성 특성만을 반영한 경우에는 PCB의 warpage가 초기 상태로 원복되었지만, prepreg의 점탄성 특성까지 반영하였을 때는 그 warpage가 원복되지 못하고 영구적인 warpage 변화가 발생함을 확인하였다. 각기 다른 3개 종류의 prepreg 원자재에 대한 warpage 해석을 진행하여 그 기계적 신뢰성을 비교 분석하였으며, 그 결과 탄성 특성이 점탄성 특성보다 우세한 재료일수록 warpage가 더욱 적게 발생하여 기계적 신뢰성이 우수하였다.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.169-180
• /
• 2015

Recently, scheduling problems with position-dependent processing times have received considerable attention in the literature, where the processing times of jobs are dependent on the processing sequences. However, they did not consider cases in which each processed job has different learning or aging ratios. This means that the actual processing time for a job can be determined not only by the processing sequence, but also by the learning/aging ratio, which can reflect the degree of processing difficulties in subsequent jobs. Motivated by these remarks, in this paper, we consider a two-agent single-machine scheduling problem with linear job-dependent position-based learning effects, where two agents compete to use a common single machine and each job has a different learning ratio. Specifically, we take into account two different objective functions for two agents: one agent minimizes the total weighted completion time, and the other restricts the makespan to less than an upper bound. After formally defining the problem by developing a mixed integer non-linear programming formulation, we devise a branch-and-bound (B&B) algorithm to give optimal solutions by developing four dominance properties based on a pairwise interchange comparison and four properties regarding the feasibility of a considered sequence. We suggest a lower bound to speed up the search procedure in the B&B algorithm by fathoming any non-prominent nodes. As this problem is at least NP-hard, we suggest efficient genetic algorithms using different methods to generate the initial population and two crossover operations. Computational results show that the proposed algorithms are efficient to obtain near-optimal solutions.