• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.326-332
• /
• 2011

The growth and bolting characteristics of spring Chinese cabbage cultivars at two night-time temperature treatments such as $5^{\circ}C$ and $10^{\circ}C$ during seedling stage were investigated to establish a safe environmental management strategy for raising seedlings. The low night-time temperature treatments were applied at 5, 10, and 15 days after sawing and the treatment durations were 5, 10, and 15 days in each of treatment beginning. The growth of seedlings in all the tested cultivars were linearly reduced as the treatment duration was extended and no symptoms of bolting were found. The reduction rate in seedling growth of 'Chunkwang' reached to 59.3% at most by 15 days of $5^{\circ}C$ treatment when it be compared to that of control. However, no symptoms of bolting were shown in the treatments of two night-time temperatures until the harvest at 90 days after sawing, indicating that the vernalization effect by low night-time temperature could be mitigated by subsequent day-time optimal temperature management. This study showed that the major spring Chinese cabbage cultivars require more ultimate level of low night-time temperature treatment for the vernalization than this study. It is also supposed that the optimal day-time temperature management can reduce or delay the rate of bolting, even if the seedlings were exposed to short-term low temperature below $5^{\circ}C$ during night-time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.147-150
• /
• 2002

To investigate the effects of Harvesting time and additives on the quality of peanut silage, the silage was mixed in combination with peanut leaf and stem, rice and barley straw, inoculant etc. Harvesting time at peanut growth stage was the best at 90 days after flowering with 30 branches,81 g of 100-seed weight, and 77% of shelling rate with low diseases in leaf and stem. By delay of harvest, diseases and lodging were increased. The yield of forage was the highest at 90 days after flowering as 52 t/ha, and seed yield was at 110 days as 3.72 t/ha. The yields between forage yield and seed yield ($r^2$=0.62$^{**}$) were correlated positively. The value of silage as a forage came over 90 days after flowering in combination with peanut leaf+stem+vice straw+inoculant treatment. The treatment was increased dry matter (DM) yield and neutral detergent fiber (NDF), the coarse protein (CP), and total digestible nutrient (TDN) content of silage in comparing with control (peanut leaf+stem). The pH at the organic matter contents of silage in combination of peanut leaf+stem+rice straw+lactic acid treatment was 5.04 to 5.10, the content of butyric and lactic acid were 3.12 to 4.64%, 2.07 to 7.34%, respectively.y.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.77-84
• /
• 2012

It is known that some components of wood obstruct the hydration of cement when wood is mixed with cement. In order to examine the effect of pretreatment of wood chips in hot water, this study conducted the experiments for the setting and compressive strength of mortar by sieving pine wood chips with a 2.4mm sieve, dipping them in waters of different temperatures, and then using them as a part of the fine aggregate. For the experiments, water-cement ratio of the mortar was 0.50 and the amount of the fine aggregate substituted by wood chips was set at 0%, 2%, 4%, 6%, 8%, and 10% of the mass of the fine aggregate. As a result of the test, it was found out that when wood chips were used to substitute fine aggregate for the production of mortar, more usage of wood chips postponed setting more, and the treatment of wood chips with water improved the problem of the delay in setting time. Especially, the final setting time of the mortar which used 2~6% of wood chips treated in $100^{\circ}C$ water for 30 minutes was almost the same as the final setting time of the mortar which used no wood chips. Also, the compressive strength of the mortar which used the wood chips treated with water was compared to that of the mortar which used the wood chips not treated with water. The result showed that the strength improved for age of 7 days and 28 days, while there was little change in strength for age of 3 days.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1039-1047
• /
• 2017

This paper presents a test development of a Fly-By-Wireless flight control system for a fixed-wing unmanned aerial vehicle (UAV). Fly-By-Wireless system (FBWLS) refers to a system that uses a wireless network instead of a wired network to connect sensors and actuators with a flight control computer (FCC), reducing considerable amount of wires. FBWLS enables to design a much lighter aircraft along with decreased maintenance time and cost. In this research we developed a Zigbee-based FWBLS UAV in which sensors (GPS and AHRS) are wirelessly connected via a FCC to aileron and elevator servo motors. In order to see the effect of time delay due to wireless signal on the flight stability of the UAV, several flight tests were conducted. From the tests, it was confirmed that the effect is minor by comparing the flight response of the FBWLS with the corresponding Fly-By-Wire system.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.472-483
• /
• 2013

Actual maritime exercise for improving the capability of submarine sonar operator leads to a lot of cost and constraints. Sonar simulator maximizes the capability of sonar operator and training effect by solving these problems and simulating a realistic battlefield environment. In this study, a passive sonar simulator algorithm is suggested, where the simulator is divided into three modules: maneuvering module, noise source module, and sound propagation module. Maneuvering module is implemented in three-dimensional coordinate system and time interval is set as the rate of vessel changing course. Noise source module consists of target noise, ocean ambient noise, and self noise. Target noise is divided into modulated/unmodulated and narrowband/broadband signals as their frequency characteristics, and they are applied to ship radiated noise level depending on the vessel tonnage and velocity. Ocean ambient noise is simulated depending on the wind noise considering the waveguide effect and other ambient noise. Self noise is also simulated for flow noise and insertion loss of sonar-dome. The sound propagation module is based on ray propagation, where summation of amplitude, phase, and time delay for each eigen-ray is multiplied by target noise in the frequency domain. Finally, simulated results based on various scenarios are in good agreement with generated noise in the real ocean.

• Journal of the Korean Chemical Society
• /
• v.52 no.3
• /
• pp.303-314
• /
• 2008

The purpose of this study was to understand the experiment for measuring chemical reaction rate by precipitate formation and to develop experiments applying small-scale chemistry. For this study, the experimental method for measuring the effect of concentration and temperature on chemical reaction rates presented in the 10 high school science textbooks were classified by their experimental methods of confirming production. Subsequently, problems observed in carrying out the experiments for measuring chemical reaction rates by precipitate formation frequently presented in the 10 high school science textbooks were analyzed. Experiments applying small-scale chemistry were developed measuring chemical reaction rate by precipitate formation. According to the result of this study, there were some problems in the experimental method of precipitate formation for measuring chemical reaction rates presented in the high school science textbooks. Those problems in the science textbook experiments were insufficient specification of mixing methods of reaction solutions, obscurity of knowing when the character letter X disappeared, time delay in collecting the experimental data, formation of hazardous sulfur dioxide, uneasiness of fixing water bath container, controlling the reaction temperature, and low reproducibility. Those problems were solved by developing experiments applying smallscale chemistry. Presenting the procedure of mixing reaction solutions on the A4 reaction paper sheet made the experimental procedure clearly, using well plates and stem pipette shortened the reaction time and made it possible to continuously collect the experimental data. Furthermore, the quantity of hazardous sulfur dioxide was reduced 1/7 times and the time when the character letter X disappeared could be observed clearly. Since experiments for measuring the effect of concentration and temperature on chemical reaction rates could be performed in 30 minutes, the developing experiments applying SSC would help students understand the scientific concepts on the effect of concentration and temperature on chemical reaction rates with enough time for experimental data analysis and discussion.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.641-648
• /
• 2011

Frequency domain equalization is the most promising technology that has relatively low complexity in multipath channel. A frame of single carrier system with frequency domain equalization (SC-FDE) has cyclic prefix to mitigate effect of delay spread. After synchronization and equalization procedure on the SC-FDE system, common phase offset (CPO) that can introduce performance degradation caused by phase mismatch between transmitter and receiver oscillators is remained. In this paper, common phase offset tracking in frequency domain is proposed. To track CPO, constant amplitude zero autocorrelation code sequence as training sequence is adopted. By using numerical results, performance of mean square error is evaluated. The results show that MSE of CPO has similar performance compare to the time-domain estimation and there is no need of domain conversion.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.515-519
• /
• 1999

With the purpose of determining the influence of sexual partners on the oestrous behaviour and to evaluate the accuracy of predicting the time from implant withdrawal to sexual receptivity following a treatment with Synchromate B (SMB), 15 adult Brahman cows were used in each of three phases. During phase I and n, random pairs of animals were induced to display oestrus one pair after the other at daily intervals, while in phase III, cows were induced alternately, every other day, one cow on the 1st day, two on the 3rd, one on the 5th, two on the 7th until all cows were treated. Sixty six percent of the cows in phases I and II, and 80% in phase III came into oestrous after treatment. The interval between implant withdrawal and, expected and observed oestrous was statistically different in all phases. Clustering of oestrous was evident. Cows displayed sexual receptivity within a. range of -24 to +96; -24 to +72 and -216 to +192 hours after implant withdrawal for the three phases, respectively, with a tendency for cows treated first (within treatments), to delay their oestrus signs and vice versa. In phase III, four cows showed oestrous behaviour with the implant in place. These in spite of not observing pre-ovulatory follicles. Correlation values of 0.99, 0.93 and 0.90 (P<0.05) were found respectively among treatments, between the number of cows coming into oestrus and the number of mounts observed. These findings suggest that there are social and behavioural factors in a herd that may override exogenous synchronisation treatments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4977-4983
• /
• 2015

The full depth excavation induces couple of technical and social problems like increase of construction cost and time for excavation and backfill, increase of public complains and delay of traffic, and so force. In order to overcome these problems, lots of laboratory tests were carried out for sewer pipeline of maintenance materials with trenchless methods. The testing materials are PVC strip and then the lab tests were followed by Korean Standard. We will treat the structure safety and pipe integrity of PVC profile more excellent than the profile have application to SPR. There is no side-effect to process and to satisfy the criteria of tensile strength, impact strength and softening temperature. The profile with resin adhesive showed no leakage of water at specific pressure.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.11
• /
• pp.503-510
• /
• 2014

With the development of electronic communication technology, the ship's navigational equipment is being digitized, and it has being studied touch-screen-based navigation user interface. However, due to the influence of environmental factors such as waves, it has a potential problem hazardous marine accident occurs due to incorrect operation, the systematic research in consideration of this be done do not. In this paper, we provide a user interface experimental model to verify the stability that takes into account the external environment of the touch-screen input on. Further, we simulated to verify that the interface of the touch screen, the effect of applying the input delay time and the size of the button is obtained through the experimental model proposed. It will be able to greatly contribute to studies of the interface robust touch screen user errors that can be analyzed by the experimental model is proposed to improve the ship, the overall system stability.