• Journal of radiological science and technology
• /
• v.24 no.2
• /
• pp.13-17
• /
• 2001

When most patients are diagnosed with the quiet progressed hepatoma which often would make the operation impossible, the Interventional Radiology hepatic artery embolization is an extremely useful method for such patients. An existence of the malfunction is evaluated by gaining a portal vein image as a delayed phase image after injecting a contrast media into the superior mesenteric artery. However, it is difficult to make a definite judgement due to the extended exposure time with the peristalsis and the intestine gas obstructing the sharpness of the image when the Patient exposure time increases and due to the increased usage of contrast media and its side effect. The portal vein can be evaluated by obtaining the MIP image after reconstructing a 3-dimensional personal computer setting using the 2-dimensional from an enhancement abdomen CT image that is almost a requisite in operation to a hepatoma patient. Such method nay prevent a decrease in the quality of image based upon the time delay and intestine gas; also, because the patient exposure dose and contrast media usage may be reduced, it is a new, valuable way to decide the operational matter of hepatic artery embolization on a pre-angiography.

• Journal of Korea Multimedia Society
• /
• v.17 no.10
• /
• pp.1198-1204
• /
• 2014

Most of vaccine type security solutions detect intrusion of computer virus or malicious code. However, they almost don't have functionalities of the information leakage detection. In particular, information leakage through keylogging attact cannot be detected. In this paper, we design and implement a solution to detect the leakage of information through keylogging attact. Proposed solution detects the user-specified information in real time. To detect the leakage of user-specified information, the solution extracts the payload field from each outbound packet and compares with user-specified information. We design the solution to reduce the effect on the packet transmission delay time due to packet monitoring operation. And we design a simple user interface. By proposed solution, user can response to intrusion or information leakage immediately because he or she can perceives a leakage of information in real time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.2
• /
• pp.262-268
• /
• 2019

Previous dynamic models of hysteresis motor use an extended induction machine equivalent circuit or somewhat different equivalent circuit with conventional one, which makes unsatisfiable results. In this paper, the hysteresis dynamic characteristics of the motor rotor are analyzed using the inverse Preisach model and the hysteresis motor equivalent circuit considering eddy current effect. The hysteresis loop for the rotor ring is analyzed under full-load voltage source static state. The calculated hysteresis loop is then approximated to an ellipse for simplicity of dynamic computation. The permeability and delay angle of the elliptic loop apply to the dynamic analysis model. As a result, it is possible to dynamically analyze the hysteresis motor according to the applied voltage and the rotor material. With this method, the motor speed, generated torque, load angle, rotor current as well as synchronous entry time, hunting effect can be calculated.

• Fire Science and Engineering
• /
• v.29 no.6
• /
• pp.1-5
• /
• 2015

In this study, the combustion characteristics of Hinoki Cypress Louver were measured after performing pressure impregnation with aqueous solution of boric acid, borax, and ammonium phosphate. The characteristics measured include ignition time, critical heat flux, and mass loss rate by incident hear flux (25, 30 and $50kW/m^2$). The samples used for the test were $100{\times}100{\times}10mm$, and the 5 min variation for each incident heat flux was measured 3 times. The results show that the ignition time for incident heat flux of $25kW/m^2$ showed a delay effect of 17.4 to 21.3% except for Type C-H. There was no significant difference at 35 and $50kW/m^2$ in the average mass loss rate in Types A-H and D-H, which had lower rates than Type N-H, which was predicted to be higher than that of Type N-H ($10.7kW/m^2$) by 38.22 to 60.46%. It is thus expected that at the time of initial primary fire, there would be a delay effect against fire spread.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.267-290
• /
• 2018

This paper reviews and criticizes the EU Case of C-452/13, Germanwings GmbH v. Ronny Henning. Under this case, Ronny Henning later sued Lufthansa's budget carrier Germanwings after it refused to pay him 250 euros compensation for a delay he said totalled more than three hours. Germanwings, however, maintained his flight had arrived only two hours and 58 minutes behind schedule. In those circumstances, the following question to the European Court of Justice (ECJ) for a preliminary ruling: What time is relevant for the term time of arrival used in Articles 2, 5 and 7 of Regulation [No 261/2004]: (a) the time that the aircraft lands on the runway (touchdown); (b) the time that the aircraft reaches its parking position and the parking brakes are engaged or the chocks have been applied (in-block time); (c) the time that the aircraft door is opened; (d) a time defined by the parties in the context of party autonomy? ECJ says that the situation of passengers on a flight does not change substantially when their aircraft touches down on the runway at the destination airport, when that aircraft reaches its parking position and the parking brakes are engaged or when the chocks are applied, as the passengers continue to be subject, in the enclosed space in which they are sitting, to various constraints. Therefore, it is only when the passengers are permitted to leave the aircraft and the order is given to that effect to open the doors of the aircraft that the passengers may in principle resume their normal activities without being subject to those constraints. ECJ rules that it is apparent that Articles 2, 5 and 7 of Regulation No 261/2004 must be interpreted as meaning that the concept of 'arrival time', which is used to determine the length of the delay to which passengers on a flight have been subject, corresponds to the time at which at least one of the doors of the aircraft is opened, the assumption being that, at that moment, the passengers are permitted to leave the aircraft.

• Journal of Korea Multimedia Society
• /
• v.8 no.10
• /
• pp.1403-1410
• /
• 2005

The synchronization problem is directly related to the quality of service in multimedia communication and especially in real-time communication. In this study, we found the cause of clock fluctuation between encoder and decoder in MPEG-2 system layer was that the standard decoder design only considered a fixed time delay component. To solve it, we proposed Extended-SRTS algorithm, which uses STC as service clock by synchronizing transport stream. As the result, we can improve the effect of frequency-drift, time-varying-network-jitter and packing-jitter and so on And by virtue of this algorithm, we can make low the dependency of network clock, which makes easy to synchronize and connect transparently at the ends point, we expect the proposed algorithm can be widely applied to the field of real -time multimedia communications.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.29-34
• /
• 1993

Experiments have been carried out with C3H mouse fibrosarcoma (FSa II) to determine the effect of different sequence and time intervals between irradiation and administration of cis-diammihedichloroplatinum (cis-DDP) with gross tumors (6 mm in diameter), microscopic tumors (3 days after transplantation of $10^3$ cells) and cells in culture. The drug was administered either 24, 12, 8, 4, 2, 1, 0.5 hour before irradiation, immediately before irradiation, or 0.5, 1, 2, 4, 8, 12, 24 hours after irradiation. In case of in vivo studies, tumor growth delay was used as an end point. Clonogenic cell surviving fraction was used for in vitro studies. Tumor growth delay for gross tumor after 10 Gy radiation plus 10 mg/kg cis-DDP ranged from 6.3 to 10.66 days and the enhancement ratio ranged from 1.37 to 2.23. The most effective combination was when cis-DDP was given 4 hours before irradiation. Tumor growth delay for microscopic tumor after 5 Gy of radiation and 5 mg/kg of cis-DDP ranged from 3.55 to 11.98 days with enhancement ratio from 2.05 to 6.92. Microscopic tumors showed response significantly greater than additive in every time interval and the most effective treatments were when cis-DDP was given 2 and 1 hour before irradiation. In in vitro experiment, the surviving fraction after 6 Gy of radiation and 1 hour exposure to 4 ${\mu}M$ cis-DDP fluctuated as a function of time between treatments, but the difference between maximum and minimum surviving fractions was very small. According to the above results the sequence and time interval between irradiation and chemotherapy is very critical especially for the management of microscopic tumors as in the case of postoperative adjuvant treatment.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.233-240
• /
• 1999

Locally PDA has been utilized mainly as an alternative way of preforming pile loading tests. More than 30 units of PDA's are believed to be operating in Korea. It is true that PDA can provide useful information regarding bearing capacity, integrity, hammer performance, time effect, etc. However it is also true that inappropriate execution of PDA could result in harmful effects for the safety of the superstructure or causing delay in the construction process. In this paper several cases of inappropriate application of PDA are introduced. Most of the problems seemed to be caused by unqualified personnel who carry out testing and analysis. From the evaluation of the cases a proposal has been made for the proper application of PDA.

• Korean Journal of Plant Resources
• /
• v.25 no.6
• /
• pp.700-706
• /
• 2012

Influences of different seeding dates on growth, seed yield, fatty acid composition and oil content were investigated in flax plants for two years. The results indicated that plant height in early seeding date was higher than that of delayed seeding dates during first season. Furthermore, seeding date also significantly affected the ripened seed rate and the rate increased with the delay in seeding date in first season. Seed yield in the first crop season was significantly higher than the second crop season. Palmitic acid showed variation in different seeding dates. Contrarily, stearic acid was stable and did not changed by different seeding dates. Linolenic acid was found in highest amount in all seeding dates consecutively in two cropping years. Highest oil content was recovered from the seeds of flax sown at 29 Apr. and May 9 in first and second cropping year respectively.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1392-1397
• /
• 2003

This paper deals with a control technique of eliminating the transient vibration of a twin-drive geared mechanical system. This technique is based on a model-based control in order to establish the damping effect at the driven machine part. The control model is composed of reduced-order electrical and mechanical parts. This control model estimates a load speed converted to the motor shaft. The difference between the estimated load speed and the motor speed is calculated dynamically and it is added to the velocity command to suppress the transient vibration generated at the load. This control technique is applied to a twin-drive geared system with backlash. In the previous work, the performance of this control method is examined by simulations. In this paper, the effectiveness of this control technique is verified by experiments. The settling time of the residual vibration generated at the loading inertia can be shortened down to about 1/2 of the uncompensated vibration level.