• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.128-131
• /
• 2004

This paper is to investigate the mock up test results of mass concrete for transfer girder using setting time difference with super retarding agent(SRA) to reduce hydration heat. According to test results, the temperature history of plain concrete without placing lift had a steep rising curvature, and plain concrete had a big temperature difference between surface and middle section of mass concrete, which may result in occurrence of temperature crack. However, considering placing method B, because setting time of middle section concrete was retarded with an increase in SRA contents, higher hydration heat temperature was observed at surface section concrete compared with that at middle section concrete at early age, which can lower the possibility of hydration heat crack. In case of placing method C, although peak temperature of hydration heat was much lower, at early age, high crack occurrence possibility of the hydration heat attributable to the big temperature difference between middle section and bottom section of concrete was expected at bottom section concrete. Therefore, the structure above the ground like transfer girder is not applicable to consider the placing method C.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.5
• /
• pp.717-722
• /
• 2013

The wastewater reclamation and reusing system has been rising as an alternative of water resource exhaustion that the whole world is experiencing. In order to be able to bring about improvement of the existing wastewater reclamation and reusing system, this research has developed of Conversion-Human Machine Interaction (C-HMI) based real-time control and monitoring system such as a sensor module and gate module, web monitoring system. This system was communication almost-error-free in various environment and situation. As a result, we have achieved our goal that has to doing work correctly as a sensor and gateway module that communication error is less than 0.2% throughout the embodied system and add that it can be easily controled and configured as an interface equipment to a complex sensor of water quality. According to this, the construction of a database capable of analyzing and assessing collection, storage and various elements of reliable water quality and flow rate data can be possible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.399-400
• /
• 2008

The light efficiency of fringe-field switching (FFS) mode when using a liquid crystal (LC) with positive dielectric anisotropy was found to be dependent on the magnitude of dielectric anisotropy, such that the lower dielectric anisotropy, the higher. We studied out not only light efficiency but also response time according to dependence on the magnitude of dielectric anisotropy. Rising and decay time became fast and slow respectively according to decreasing the magnitude of dielectric anisotropy. This paper investigates electro-optical characteristic of FFS mode using LC with a positive dielectric anisotropy dependent on the magnitude of dielectric anisotropy of the LC.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4390-4407
• /
• 2019

The paucity of pilot signals in Massive MIMO system is a vital issue. To accommodate substantial number of users, pilot signals are reused. This leads to interference, resulting in pilot contamination and degrades channel estimation at the Base Station (BS). Hence, mitigation of pilot contamination is exigency in Massive MIMO system. The proposed Time Shifted Pilot Signal Transmission with Pilot signal Hopping (TSPTPH), addresses the pilot contamination issue by transmitting pilot signals in non-overlapping time interval with hopping of pilot signals in each transmission slot. Hopping is carried by switching user to new a pilot signal in each transmission slot, resulting in random change of interfering users. This contributes to the change in channel coefficient, which leads to improved channel estimation at the BS and therefore enhances the efficiency of Massive MIMO system. In this system, Uplink Signal Power to Interference plus Noise Power Ratio (SINR) and data-rate are calculated for pilot signal reuse factor 1 and 3, by estimating the channel with Least Square estimation. The proposed system also reduces the uplink Signal power for data transmission of each User Equipment for normalized spectral efficiency with rising number of antennas at the BS and thus improves battery life.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.2
• /
• pp.63-70
• /
• 1999

This paper is proposed a new method to deal with the optimized auto-tuning for the Pill controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nichols method. So we can find the parameters of Pill controller so as to minimize the fuzzy criterion function which includes the maximum overshoot, damping ratio, rising time and settling time. Finally, after studying the parameters of Pill controller by Backpropagation of Neural-Network, when we give new K, L, T values to Neural-Network, the optimized parameter of Pill controller is found by Neural-Network Program.rogram.

• Archives of design research
• /
• v.15 no.4
• /
• pp.285-294
• /
• 2002

According to the dramatical changes from individual trip to the family and couple trip in 1990 caused by both economic growth, rising the level of people's income, and change of social structure such as the increasing time due to the fact of automatic system, and social trends to use this time for their leisure time, this trend influences on the cruise. recently, required for accommodating room to family, the cruise decorated with luxurious things becomes the center of public attention. This study should be a foundation works for developing domestic cruise in near future through surveying a floor plan (plan of room and deck), picture of room, characteristic of space, finish material and interior spatial organization factor & characteristic and analyzing them.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.3
• /
• pp.373-378
• /
• 2008

The pH & alkalinity adjustment method by lime and carbon dioxide($CO_2$) for corrosion control in water distribution system was investigated to determine the optimum operational condition in lime adding process in water treatment plant(WTP). The mixing time at dissolution tank and sedimentation time at saturator for maintaining optimal turbidity condition of lime supernatant were 60~75 minutes and 75~95 minutes, respectively. There was no difference according to $CO_2$ adding methods such as $CO_2$ saturated water or $CO_2$ gas. But, $CO_2$ saturated water could be convenience at WTP in terms of pH control and quantitative dosing. To minimize generation of calcium carbonate products, the short time interval between adding of lime and $CO_2$ is most important. The lime should be added below 32 mg/l for preventing pH rising and generation of calcium carbonate products at the heating condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.88-93
• /
• 1995

The ball screw preloaded for high nigidity and accuracy increases frictional resistance, therefore, its temperature and positioning error rise. In this paper, 2 diamensional temperature distributions of a ball screw with preload are analyzed according to the rotational speeds and stop times by a finite element method. The theremal behaviors of a ball screw are measured to examine the analyzed datum. The examined results show that the trends of temperature rising and axial distributions in steady state are nearly extimate but the temperature low. The differences of temperature ate seems to be caused by not exact heat transfer coefficients. More than an hour is consumed for calculation by FEM. So the modified lumped method for the real-time estimation of the thermal distribution is proposed. The estimated temperature of a ball serw by the modified lumped method is more exactly estimated than by FEM, nd that method takes less than several millisec. Moreover it can be used to estimate heat transfer coefficients.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.109-114
• /
• 2008

As the Ubiquitous times approach, an interest regarding a Ubiquitous sensor network to be the only during key technology is rising. Currently, The fast development which radio communication technique is creating new services from the industry sector which is various from convenient characteristic and the ease characteristic side. Specially, rise and development of the radio communication technique which is various from environment monitor ring field makes to be improved about sharp curtailment of establishment and logistics relation expense, and collection period of the data which occurs real-time from site, reliability and delivery characteristic. But continuous application and the success about the environment monitor ring field of radio communication technique will be able to trust And It is important to provide time information which is appropriate real-time.

• Annals of Hepato-Biliary-Pancreatic Surgery
• /
• v.27 no.3
• /
• pp.277-286
• /
• 2023

Backgrounds/Aims: To study histopathological changes in gall bladder mucosa in cholelithiasis patients, and analyse their relation to the number and size of gallstones. These findings were evaluated in the context of age distribution of the study population. Methods: One hundred cases of cholecystectomy were part of the study, which was conducted in collaboration with the pathology department. The time period of the study was January 2020 to June 2021. Results: Maximum cases had multiple stones (69.0%), while one third cases (31.0%) had solitary stones. While initial univariate analysis showed age (odds ratio [OR], 6.882; p = 0.043), gallstone number (OR, 9.1; p = 0.050), gallstone size (OR, 17.111; p = 0.013), and duration of symptom (OR, 34.125; p = 0.001) to be significant risk factors associated with gallbladder carcinoma, multivariate analysis found none of these variables to be significant. However, conditional multivariate analysis for the duration of symptom (p = 0.008; OR, 21.118) yielded significant p-value. With histopathological diagnoses, 5% of cases had gallbladder cancer. Conclusions: This study shed light on the rising incidence of cholelithiasis in the young population and the high rate of gallbladder carcinoma in Punjab, India. Although gall stone characteristics (size, number) and patient age appeared to be significant risk factors when their individual relation with gallbladder carcinoma was studied, multivariate analysis, could not prove that. Conditional multivariate analysis showed the duration of symptom to be the only significant risk factor associated with gallbladder carcinoma. Further research with larger sample size is needed to study the rising incidence of gallbladder carcinoma, and the risk factors associated with it.