• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.33.2-33
• /
• 2001

The robust stability condition for sampled-data control systems with a sector nonlinearity was presented in our previous paper. Although it is applicable only to the sampled-data control system of a certain class, a usual discretetime control system can belongs to this type of class. This paper analyzes the amplitude dependent behavior of nonlinear sampled-data (i.e., discrete-time) control systems in a frequency domain. By considering restricted areas (sectors) in the nonlinear characterisitic, the existence of a sustained oscillation is estimated, and the relationship between the stable/unstable conditions and the result derived from describing function is compared. Based on these considerations, the stabilization of nonlinear discrete-time control systems is examined in the frequency domain.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.245-248
• /
• 2010

Almost all of control schemes proposed so far have been designed in the continuous-time domain theoretically. Actual systems, however, have been implemented in the discrete-time domain since Micro Control Unit(MCU) and/or microprocessors have been used for the controllers. Thus, the overall system turned to be a sampled-data system, and generally speaking, the ultimate error cannot converge to zero in the actual system even though the proposed control algorithm showed the asymptotic stability in the continuous-time domain. In this paper, therefore, the ultimate error bound of a sampled data system with a short sampling period has been investigated. The ultimate error is shown to be related in the sampling period.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.139-148
• /
• 2021

Negative apparent chargeability data in time-domain induced polarization (IP) survey are very often considered as noise and rejected before the inversion stage. Negative IP data can, however, occur naturally as a consequence of the distribution of chargeable zones in the ground. In some cases, the negative apparent chargeability values may account for most of the data measured. Negative IP data are caused by the geometry of chargeable zones and electrode positions. Negative apparent chargeability data appear most frequently when a dipole-dipole array is used. In this study, the effect of negative apparent chargeability data on inversion results is analyzed through the numerical 2D time-domain IP modeling and nonlinear inversion. The results demonstrate clearly that negative apparent chargeability data have to be included in the inversion as they contain important information on the distribution of subsurface chargeability.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.29-33
• /
• 2000

The classical image reconstruction for stripmap SAR is based on the Fresnel approximation which utilizes deramping or chirp deconvolution in the synthetic aperture(slow-time) domain. Another approach in formulating stripmap SAR processing and imaging is based on the SAR wavefront reconsturction theory, and analysis of the SAR signal in the slow-time via the spherical wave Fourier decomposition of the radar radiation pattern. In this paper, we compare the Fresnel approximation and the wavefrong reconstruction methods using simulated stripmap SAR dada.

• Structural Engineering and Mechanics
• /
• v.62 no.5
• /
• pp.631-642
• /
• 2017

Accurate actuator tracking plays an important role in real-time hybrid simulation (RTHS) to ensure accurate and reliable experimental results. Frequency-domain evaluation index (FEI) interprets actuator tracking into amplitude and phase errors thus providing a promising tool for quantitative assessment of real-time hybrid simulation results. Previous applications of FEI successfully evaluated actuator tracking over the entire duration of the tests. In this study, FEI with moving window technique is explored to provide post-experiment localized actuator tracking assessment. Both moving window with and without overlap are investigated through computational simulations. The challenge is discussed for Fourier Transform to satisfy both time domain and frequency resolution for selected length of moving window. The required data window length for accuracy is shown to depend on the natural frequency and structural nonlinearity as well as the ground motion input for both moving windows with and without overlap. Moving window without overlap shows better computational efficiency and has potential for future online evaluation. Moving window with overlap however requires much more computational efforts and is more suitable for post-experiment evaluation. Existing RTHS data from Network Earthquake Engineering Simulation (NEES) is utilized to further demonstrate the effectiveness of the proposed approaches. It is demonstrated that with proper window size, FEI with moving window techniques enable accurate localized evaluation of actuator tracking for real-time hybrid simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.4C
• /
• pp.418-424
• /
• 2007

This paper proposes a scheme to track channel response in OFDM systems with null sub-carriers. The proposed channel tracking scheme estimates the channel response first in the frequency domain by using the decision directed data. The time domain channel estimation is then performed to remove additive white Gaussian noise (AWGN) components further. Due to the channel estimation in the frequency domain, no inverse matrix calculation is required in the time domain channel estimation. Computational reduction in the proposed method is about 93%, compared with the conventional time domain channel estimation method. Mean square error (MSE) and bit error rate (BER) performances are evaluated by using computer simulation. The proposed method shows the same performance as that of the conventional time domain channel estimation even though the significant computational reduction.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.295-303
• /
• 2012

Based on the data observed and analyzed on a groundwater flow system in the KURT (KAERI Underground Research Tunnel) site, the transport of radionuclides, which were assumed to be released at the supposed position, was calculated on the time-domain. A groundwater pathway from the release position to the surface was identified by simulating the groundwater flow model with the hydrogeological characteristics measured from the field tests in the KURT site. The elapsed time when the radionuclides moved through the pathway is evaluated using TDRW (Time Domain Random Walk) method for simulating the transport on the time-domain. Some retention mechanisms, such as radioactive decay, equilibrium sorption, and matrix diffusion, as well as the advection-dispersion were selected as the factors to influence on the elapsed time. From the simulation results, the effects of the sorption and matrix diffusion, determined by the properties of the radionuclides and underground media, on the transport of the radionuclides were analyzed and a decay chain of the radionuclides was also examined. The radionuclide ratio of the mass discharge into the surface environment to the mass released from the supposed repository did not exceed $10^{-3}$, and it decreased when the matrix diffusion were considered. The method used in this study could be used in preparing the data on radionuclide transport for a safety assessment of a geological disposal facility because the method could evaluate the travel time of the radionuclides considering the transport retention mechanism.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.2
• /
• pp.93-101
• /
• 2016

This paper presents the results obtained using time-series-based methods for structural damage assessment. The methods are applied to a wind turbine blade structure subjected to fatigue loads. A 9 m CX-100 (carbon experimental 100 kW) blade is harmonically excited at its first natural frequency to introduce a failure mode. Consequently, a through-thickness fatigue crack is visually identified at 8.5 million cycles. The time domain data from the piezoelectric active-sensing techniques are measured during the fatigue loadings and used to detect incipient damage. The damage-sensitive features, such as the first four moments and a normality indicator, are extracted from the time domain data. Time series autoregressive models with exogenous inputs are also implemented. These features could efficiently detect a fatigue crack and are less sensitive to operational variations than the other methods.

• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.332-340
• /
• 2008

In this paper, comparisons of the superimposition schemes for orthogonal frequency division multiplexing (OFDM) system are made. The time domain superimposition of data (TDSD) has a tradeoff between the degree of freedom for data transmission and inter-carrier interference (ICI). While SPPT and APSB experiences the increases of interference as the transmit data rate increases, TDSD can effectively improve spectral efficiency by exploiting preprocessing structures which prevents interference between the signals in the different domain. TDSD which we proposed is compared with the conventional superimposition schemes or OFDM, such as SPPT (the superimposed periodic pilot in the time domain) and APSB (the added pilot semi-blind channel estimation) by simulation. As the result, comparing the conventional OFDM, TDSD can increase the spectral efficiency up to about 20% with the superimposition factor M=16 while SPPT has the similar efficiency. APSB has the worst efficiency.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.119-122
• /
• 1997

In this paper, we represented the variation of heart cavity area in the space domain by 3-d rendering. We arranged the 2-d sequence of ultrasonic image acquired in the time domain as volumetric data, and extracted heart cavity region from 3-d data. For the segmentation of 3-d volume data, we extracted the cavity region using the method of expanding the cavity region that is same statistical property. By shading which is using light and object normal vector, we visualized the volume data on image plane.