• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.37-48
• /
• 1995

The TIDE, nonlinear finite element model for the simulation of tidal analysis in a shal- low ooastal area was tested for its applicability at the Saemankeum day. Calibration of the TIDE model has been carried out using the six observed field data collected at five locations within the region for tidal velocity. Verification tests have been done using the six observed field data and four data o- tained from the hydraulic model test for the tidal velocity and elevation. Since the simula- tion results for the tidal elevation at Kunsan outer port by the TIDE model are well agreed with the results from the tidal table for one month, it is proved that the TIDE model may be used effectively to predict the tidal movement in the Saemankeum bay for a longer period.

• Journal of Environmental Science International
• /
• v.4 no.2
• /
• pp.245-251
• /
• 1995

Generally, It is Introduced to well-known other models without considering tidal current of the field. The paper presents field measurements and numerical model solving velocity field of Cheonsu Bay by two-dimensional tidal model. It was proved that this scheme is easy to handle complex topography. Computed results is represented characteristics of tidal current for Cheonsu Bay. The results of the study can be summarized as follows ; 1. Tide form number has 0.21 value. Tidal range estimated 630.3 cm on spring, 454.1 cm on mean and 277.9 cm on neap, respectively 2. Tidal current has semi-diurnal form. Distance of traveling observed 16.6 km on flood and 15.5 km on ebb. 3. Tidal velocity showed reversing current. It was found that tidal velocity above 100 cm/sec is about 20 %. 4. Computed results are in good agreement with the observed data. Applying the algorithm to Cheonsu Bay, velocity fields and dry bank phenomena are simulated well in spite of complex topography. 5. An advanced study on the effects of open boundary conditions should be continuously performed.

• Journal of Environmental Impact Assessment
• /
• v.5 no.1
• /
• pp.31-45
• /
• 1996

This paper presents the results from a hydrodynamic model study to predict the impacts of coastal reclamation in Pusan harbor system using RMA2 which is a tidal flow model of the US Army Corps of Engineers' TABS-2 system. A finite element mesh was constructed and refined to cover the complicated geometry of Pusan harbor system and the proposed reclamation area. The model was calibrated to tidal elevations and currents measured during spring fall syzygys. Under the three different tidal conditions including summer winter syzygys, spring fall quarters, and summer winter quarters, the model predictions were compared with the field measurements both in tidal elevation and current. In all cases, there were excellent agreements between the model predictions and the field measurements. The validated model was then used to predict the changes in tidal current and elevation that might occur due to the coastal reclamation. It was predicted that there would be no change in tidal elevation of this system after the reclamation. In tidal current, however, discernible changes were predicted near the proposed reclamation area both in magnitude and direction.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.1
• /
• pp.31-40
• /
• 1998

Through the combination of existing tidal prediction model and numerical tidal model, the efficient tidal prediction system was formulated and applied to the neighboring area of Pusan port. Because all tidal constituents for tidal prediction (69 tidal constituents are normally used) couldn't be considered due to the physical limits on computing process, some errors between the observed and predicted values were inevitably occurred. But it was confirmed that the computed values with maximum 10% of relative errors can be obtained if four major tidal constituents(M2, S2, K1, O1) are used. Thus, if other constituents than four major tidal constituents are additionally used, more accurate values will be obtained. Furthermore, if the database for harmonic constants in coastal waters is made in advance, using the numerical tidal model, prompt tidal prediction can be achieved at any time when it is required.

• Journal of Environmental Science International
• /
• v.3 no.1
• /
• pp.11-16
• /
• 1994

Generally, it is difficult to predict water quality in a tidal river, because tidal flows make the transport phenomena more complicated. The purpose of this study is to clarify long-term mass transport in a tidal river through suggestion of simulation model. A simulation model based on a Lagrangian coordinate system, which has the advantage reducing numerical dispersion, was used to calculate changes in concentration of chlorides. Several field surveys were conducted to verify calculated results. Concludingly, long-term behavior of mas transport in a tidal river can be represented using the model.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1997.10a
• /
• pp.111-124
• /
• 1997

With the combination of existing tidal predictio model and numerical tidal model, the efficient tidal prediction system was formulated and applied to the neighboring area of Pusan port. Because all tidal constituents for prediction (normally 69 constituents are used) can't be considered due to difficulties on computing efforts, some errors between the observed and predicted values were inevitably occurred. But it was confirmed that the practical results with about 10% of relative errors were obtained if four major tidal constituents(M$_2$, S$_2$. $K_1$, $O_1$) are used at least. Thus, if other constituents than four major tidal constituents are additornaly used, more accurate results will be obtained . Furthermore, if the databases of harmonic constants in coastal waters is made in advance using the numberical tidal model, prompt tidal prediction could be achieved whenever required.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.6
• /
• pp.964-973
• /
• 1997

A tidal prism eutrophication model, an one-dimensional intertidal model, is developed to study water quality conditions at small coastal basins and tidal creeks. The model simulates the physical transport processes using the concept of tidal flushing. The concept is simple and straightforward, and thus is ideal for small coastal basins with complex geometry. The model, having twenty-four state variables in the water column, simulates salinity, temperature, dissolved oxygen, three algal groups, and the cycles of carbon, nitrogen, phosphorus and silica. The model is applied to the Lynnhaven Bay, a small coastal basin of Chesapeake Bay in U.S.A. The model is calibrated using the field data collected in 1994, and then is verified using the independently collected data in 1980. The model overall gives a good reproduction of the field data, partly owing to the data collected from the field surveys specifically designed for the model application. This paper presents the procedure, and the results of the model calibration and verification.

• International Journal of CAD/CAM
• /
• v.9 no.1
• /
• pp.79-83
• /
• 2010

Tidal bore is a peculiar nature phenomenon which is caused by the lunar and solar gravitation. Based on the physical characters of tidal bores, in this paper we propose a novel method to model and render this phenomenon, especially the tidal waves in Qiantang estuary. According to Boltzmann equation for tidal waves, we solve it with the novel triangle mesh of Kinectic Flux Vector Splitting (KFVS) mode. Then a method combining a curve forecasting wave and particles model is proposed to render the dynamic scenes of overturning tidal waves. Finally, with some rendering technologies, various realistic tidal waves under diversified conditions is rendered in real time.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.166.2-166.2
• /
• 2011

Incheon Bay of Korea is one of the most famous regions for high tidal range. Ministry of Land, Transport and Maritime Affairs(MLTM) has implemented preliminary investigation for tidal power energy development in this area since 2006. Through field observations, various kinds of marine data consisting of depth and geography, marine weather, tidal currents, wave, seawater characteristics, geology, marine ecosystem and marine environment were gathered. To use these data efficiently for the determining of feasibility of developing and appropriateness of project scale, spatial data management and application system is essential. Therefore, in this study, the concept, methodology and procedure of spatial data modeling are defined for tidal energy development. Spatial data modeling consists of essential model relating to tidal energy directly and optional model including environmental factors. Essential model is composed with fundamental elements like as depth, geography, and several numerical modeling results(tide, tidal current, wave).

• Korean Journal of Remote Sensing
• /
• v.25 no.6
• /
• pp.501-505
• /
• 2009

Quasi-linear bright features persistently appeared on ENVISAT ASAR images as well as X-SAR images along the tidal channels in Gyung-Gi Bay, Korea during the ebb tides. These features are induced by spatial backscatter variations caused by surface convergence (divergence) through the interaction between tidal currents and bathymetry. In order to validate this mechanism, a numerical tidal model simulation is performed on the realistic bathymetry with the tidal boundary conditions. The tide model reproduces the current convergence zone along the tidal channel during the ebb tides, which exactly coincides with the location of bright line features on SAR images.