• 전기의세계
• /
• 제26권3호
• /
• pp.63-68
• /
• 1977

In this paper, the theory of pulse frequency modulated DC/DC power converter to obtain constant output voltage for all input voltage changes is discussed. The switch controller consisting of integrator and comparator determines the ON time of power switch-Thyristor-by the error between the load voltage and a load reference voltage. Resulting voltage and current waveforms have been studied theoretically in detail and verified experimentally for a resistive and inductive load condition. State equations for voltages and currents using binary logic variables are computed by digital computer. Comparison of these withe oscillograms obtained from an experimental model shows very close agreement.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권3호
• /
• pp.278-283
• /
• 1997

The rectifier is the main element in the telecom DC power system. This paper investigates the advantages and disadvantages of three rectifier techniques ; thyristor, ferro - resonant, and switched - mode. Compared with other techniques, the switched - mode rectifier tech¬nique offers several advantages such as higher efficiency, smaller size and weight, and lower audible noise. Technical requirements in telecom rectifier plant are also described. Finally, the future trends in telecom powering are discussed in connection with the advance oftelecom net¬works.

• 전자공학회지
• /
• 제7권3호
• /
• pp.34-44
• /
• 1980

몸체부분에 3-자유도와 작업용핸드에 2-자유도를 갖는 원통좌표형 산업용로봇트의 구동용 서어보장치 설계에 관한 연구보고임. 몸체구동을 위한 서어보모터의 제어장치는 속도, 위치 및 전자자전류를 궤환시켜 구성한 피이드백시스템으로 싸이리스터 듀얼 콘버터(Thyristor dual converter)를 이용하여 평균직류전압에 DC 서어보모터의 속도를 제어하도록 구성하였으며 로봇트의 전체적인 동작은 릴레이를 사용하여 구동축을 선택하도록 하였는 바 속도응답특성을 보완하기 위하여 보상회로를 첨가하였음.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.520-523
• /
• 2003

In this paper, heatsink design for high power converter is presented. There are many ways of designing heatsink, but air cooling is by far the most used and much more practical than any of the other methods. In this paper, the practical methods of cooling which include the method to reduce a noise and a vibration due to a fan and the method to design a gap resistance and a contact resistance due to mounting force between thyristor and heatsink is proposed. Finally, simulation and experimental results are described to verify validity of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.29-32
• /
• 1987

Hydro turbine, steam turbine and their generators can be described by one general model. To realize the turbine simulator, personal computer, D.C. motor and three phase thyristor converter have been used. In the experiments for the improvement of power system stability, that is, steady state, dynamic and transient stability, the characteristics of turbine simulator proposed by this paper have shown that of real prime mover.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.314-315
• /
• 2017

본 논문에서는 철도 직류 급전용 싸이리스터 이중 컨버터 전력 시스템의 병렬운전 제어기법을 제안한다. 싸이리스터 이중 컨버터 전력 시스템의 병렬운전 시 발생하는 순환전류 및 전류 불균형은 제안하는 병렬운전 기법을 통해 제어가 가능하다. 또한 제안하는 제어 기법은 동일한 응답을 가지면서 출력 측 전류 센서의 제거가 가능하다. 제안하는 제어기법의 타당성은 10kW급 축소모델의 시험을 통해 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.61-62
• /
• 2015

본 논문에서는 철도 변전설비를 위한 싸이리스터 더블 컨버터 파워 시스템의 제어 기법을 제안한다. 싸이리스터 더블 컨버터는 기존 시스템과는 다르게 전동차의 제동 시 발생하는 회생 에너지를 AC 모선으로 환원 가능하다. 제안한 제어 기법에서는 부하 상황에 따른 더블컨버터의 모드전환을 통해 안정적인 전원의 공급과 동시에 에너지 효율을 상승 시킬 수 있다. 10kW급 시작품을 제작하여 제안하는 제어 알고리즘의 타당성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.568-572
• /
• 1994

This paper presents equipment for charging and discharging with high power factor aid high efficiency. This equipment is consisted of $3{\phi}$SPWM AC/DC converter for improving input current waveform and input power factor, and bidirectional DC/DC converter for electric isolation in the DC link Part. Therefore, Input power factor and the total efficiency in the proposed system can be increased more than in the conventional phase-controlled thyristor Charging - Discharging System.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.540-542
• /
• 1999

We develop jumping ring system with sensor and control system using dynamic neural networks. Jumping ring, sensor and control system are controlled by 586 PC using Turbo C program. Sensor system is composed of 20 optical sensors and encoder. The control circuits are consisted of thyristor, FET and phase controller. A/D converter and optical sensor acquire real time motion data of the jumping ring system. The information of acquired jumping ring Position is estimated by using dynamic neural networks. Estimated control signals are sent to control circuits and D/A converter to track desired position of the jumping ring system. Experiment results are given to verify that proposed dynamic controller is useful in real jumping ring system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1438-1444
• /
• 2007

Standard Gate Turn Off (GTO) Thyristor drive technology results in inhomogeneous turn-on and turn-off transients which in turn needs costly dv/dt and di/dt snubber circuits. Added to this GTO is bulky in size, needs external cooling, slower switching time etc. The development of high voltage Insulated Gate Bipolar Transistor (IGBT) have given new device advantage in the areas where they compete with conventional GTO technology. Indian Railway has developed first IGBT based traction converter and was commissioned in November 2006. Some of the supremacy of IGBT are smaller in size, no external cooling is required, built in power supply which enhances reliability, lower switching losses which leads to higher efficiency, reduced gate drive, high frequency operation in real time etc. These advantages are highlighted along with IGBT Traction system in operation.