• 전기의세계
• /
• v.23 no.5
• /
• pp.9-15
• /
• 1974

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.69-76
• /
• 2016

Current driving capability of MCT (MOS Controlled Thyristor) is determined by turn-off capability of conducting current, that is off-FET performance of MCT. On the other hand, having a good turn-on characteristics, including high peak anode current ($I_{peak}$) and rate of change of current (di/dt), is essential for pulsed power system which is one of major application field of MCTs. To satisfy above two requirements, careful control of on/off-FET performance is required. However, triple diffusion and several oxidation processes change surface doping profile and make it hard to control threshold voltage ($V_{th}$) of on/off-FET. In this paper, we have demonstrated the effect of $V_{th}$ adjustment ion implantation on the performance of MCT. The fabricated MCTs (active area = $0.465mm^2$) show forward voltage drop ($V_F$) of 1.25 V at $100A/cm^2$ and Ipeak of 290 A and di/dt of $5.8kA/{\mu}s$ at $V_A=800V$. While these characteristics are unaltered by $V_{th}$ adjustment ion implantation, the turn-off gate voltage is reduced from -3.5 V to -1.6 V for conducting current of $100A/cm^2$ when the $V_{th}$ adjustment ion implantation is carried out. This demonstrates that the current driving capability is enhanced without degradation of forward conduction and turn-on switching characteristics.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.294-298
• /
• 2000

A new pulse multiplication technique based on 6-pulse thyristor converters is proposed in this paper. With the proposed technique 12-pulse 18-pulse and 24-pulse operations have been obtained both on the input current and on the output voltage. A control strategy over the whole range of phase angle is provided along with sophisticated input current and output voltage analysis. Experimental results from a laboratory prototype verify the proposed theory.

• Journal of the Korean Professional Engineers Association
• /
• v.22 no.3
• /
• pp.14-20
• /
• 1989

전력수요의 급증에 따라 단위기의 용량 및 전력계통의 규모가 대형화되어 지속적인 안전운전이 계통운용의 최우선 과제가 되였으며, 신뢰도향상 및 계통간전력수급의 원활한 융통을 위하석 계통간의 연계는 물론 다계통간의 다중연계에 이어 국가간의 연계도 이루어지고 있다. 본고에서는 전력계통의 대형화 및 연계화 추세에 따라 계통 무효전력 조류의 신속한 조절과 속응전압조정의 필요성이 증대되어 그 응용이 확산되고 있는 Thyristor제어 정지형 무효전력 보상기(이하 SVC라 칭함)의 원리, 특성, 응용 및 계통에 미치는 효과에 대하여 고찰하였다.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.87-88
• /
• 2014

The paper presents a novel phase locked loop(PLL) control method for robust three-phase thyristor dual converters under sag, notch, and phase loss conditions. This method is applied to three line to line voltages of grid to derive three phase angle errors from three separated single-phase PLLs. They can substitute for abnormal phase to guarantee the synchronization in the various grid fault conditions. The performance of novel PLL with moving average method is verified through simulations.

• 전기의세계
• /
• v.19 no.2
• /
• pp.6-11
• /
• 1970

For the variable speed in automatic control, this paper describes, at first, performance equations of an induction motor which has the free rotating stator. This motor with rotating stator has a speed control factor itself by equivalent variable frequency in stator side. Secondly, an additional invertor source on the rotor slip ring serves the purpose of improving the speed control factor. The advantages decribed above permit to control the speed continuosly from zero to maximum allowable speed with low energy of thyristor a feed-back device may be used for speed stabilization under variable load.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.802-807
• /
• 1998

The main drawback of parallel type active power filters (APF) is the large capacity required for harmonic compensation. This paper evaluates the APF capacity requirement of harmonic/reactive power compensation for thyristor converter load. Theoretically achievable maximum power factor under partial load is evaluated. And it is shown that the APF capacity can be considerably reduced while slightly sacrificing the filtering performance by deliberately limiting the peak current of the APF.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.121-123
• /
• 1988

For the high speed drive of induction machine, Thyristor inverter utilizing line and device commutation is proposed. By investigating the load commutation conditions, the possible area of commutation is clearly shown. And from the above results, starting method under the constant slip frequency, is suggested.

• 전기의세계
• /
• v.26 no.2
• /
• pp.72-77
• /
• 1977

This paper is devoted primarily to a study of magnetic switch which does not produce any harmful are during the switching period using triacs. The arc-eliminating method presented in this paper experimentally obtained the desired results, and also we executed numerical analysis by computer. This method will be greatly helpful for protecting contacts of magnetic switch in case of freuqent operation.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.254-258
• /
• 2001

This paper proposes a new induction heating system composed of a hyristor PWM rectifier with a resonant commutation circuit. The operation of proposed system as first analyzed by a theoretical approach with equivalent circuits. And its verification was performed by computer simulations with EMTP. The proposed system can provide a solution for the power factor problem of the existing high-power induction heating system. which uses the line-commutated thyristor bridge in rectifier side.