• Journal of the Korean Society of Costume
• /
• v.48
• /
• pp.133-150
• /
• 1999

In future what kind of costume do we wear\ulcorner We can guess it is in advance through movie. Movie is a comnipresent medium and a mode of expression that reflect a distintive feature of the times like fashion. In many case costume design which belongs to a special era is based on the historic costumes but ostume design for future movie depends on the creativity of costume designer and director. Therefore it is interesting to research how costume designer get his/her design concept for future ccostume in movie how he/hse express his/her design concept through his/her costume and can we convince the design comes true practically in future. In this study I analyze the costume design of masterpieces among SF Film: (Metropolis/1926) (2001: A Space Odyssey/1968) (Star Wars/1977) (Blade Runner/1982) (The 5th Element/1977) Because this study is analyzed not through the original article but just through movie it has some limitation in exact materials or color.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.53-59
• /
• 1995

Ethinylestradiol (EE)-containing matrix was fabricated with ethylene-vinyl acetate(EVA) copolymer to control the release of the drug, Effect of addition of PEG 400 as receptor solution, the stripping of skin and Azone pretreatment on skin on the permeation of EE through the excised mouse skin was also studied. The permeation rate of EE through the excised mouse skin was affected by the PEG 400 volume fraction. The Azone pretreatment on skin didn't affect on the steady state flux, however, the lag time was shortened. The permeation rate of EE through the stripped skin was much larger than that through the whole skin. It showed that the stratum corneum acts as a barrier of skin permeation. The fact that there is little difference in EE permeation between the intact skin and the stripped skin with EVA membrane shows the permeation of EE through the mouse skin is mainly controlled by the membrane.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.2
• /
• pp.124-130
• /
• 1999

Flow characteristics of a compressible gas flow through a rotating disc-type rotary valve are investigated experimentally under various conditions. It is known that the mass flow rate through poppet valves of 4-stroke cycle engines and through piston valves of 2-stoke cycle engines decrease with increase in engine speed. Rotary valve is one means by which air may be made to flow inter-mittently through a pipe. In this paper an exhaust system simulator of engine was used to experi-mentally analyze the decrease in flow rate at high rotation speeds and to determine what variables other than rotational speed give rise to the observed behaviour. These variables have been included in an empirical equation which is representative of the measured flow characteristics.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.48-52
• /
• 1988

New methods for the direct reduction of carboxylic acids to aldehydes through the treatments of B-acyloxy-9-borabicyclo[3.3.1]nonane (acyloxy-9-BBN) with tert-butyllithium and 9-borabicyclo[3.3.1]nonane or with lithium 9-boratabicyclo[3.3.1]nonane (Li 9-BBNH) are described. Both these systems provide the corresponding aldehydes from various carboxylic acids in high yields. A mechanism for the recuction through stepwise treatment of acyloxy-9-BBN with tert-butylithium and 9-BBN, which seems to involve the hydride migration through 9-BBN, is proposed and discussed in connection with the reduction through treatment of acyloxy-9-BBN with Li 9-BBNH.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.30-39
• /
• 1993

The study is concerned with the thermo-viscoplastic finite element analysis of nonisothermal hot container extrusion through conical dies. The problem is treated as a non-steady state incorporating the nonisothermal heat transfer analysis. The analysis of temperature distribution includes heat transfer though the boundary surface including conduction, convection and radiation. The analysis of heat transfer is decoupled with the analysis of deformation and the material interaction is considered through iteration procedure. The effect of important process parameters including die angle and extrusion ratio in the process is investigated. Due to the geometric feature for the container extrusion through conical dies, automatic remeshing is mandatory. Automatic remeshing is achieved by introducing the modular remeshing technique.

• Korean Journal of Bronchoesophagology
• /
• v.6 no.2
• /
• pp.201-203
• /
• 2000

The PTP (Press-Through-Pack) has been widely used as a packing material for tablets and capsules. But esophageal foreign bodies attributed to the PTP may cause injury to esophageal mucous membrane, potentially inducing severe complications such as hemorrhage, perforation, etc. We report three cases of PTP foreign bodies in esophagus with reference to recent literature.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1659-1670
• /
• 2001

It has been reported that cracks at mechanical fastener holes usually nucleate as elliptical corner cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks after penetrating the opposite surface. The weight function method is an efficient technique to calculate the stress intensity factors fur elliptical cracks using uncracked stress field. In this study the weight function method for three dimensional mixed-mode problem applied to elliptical comer cracks Is modified for elliptical arc through cracks and the stress intensity factors at two surface points of elliptical arc through cracks at mechanical fastener holes are analyzed by the weight function method. This study consists of two parts and in part I , the weight function method for elliptical arc through cracks is developed and verified.

• Journal of Arbitration Studies
• /
• v.33 no.4
• /
• pp.69-87
• /
• 2023

This study recognizes that consumers are becoming important as a subject of commerce as they change from the existing e-commerce market to the consumer-led e-commerce market, and proposes the use of consumer intervention as a remedy for consumer damage in international e-commerce disputes. In Korea, there is no separate regulation on consumer arbitration, so we will analyze the U.S. arbitration judgment, which is the most active in consumer arbitration, and examine it through the U.S. arbitration judgment so that arbitration can become active as a remedy for consumer disputes in Korea. In summary, in the event of a dispute between consumers and companies through e-commerce, consumers' preference for arbitration was confirmed through repeated collection of opinions without coercion. It is necessary to revitalize arbitration in Korea to protect consumers through arbitration rather than litigation and to resolve disputes through active alternative dispute resolution as a solution to disputes in e-commerce, which is rapidly increasing through U.S. consumer arbitration cases. The topic of the activation of arbitration has been mentioned a lot before, but the preference for arbitration is still lower than that of litigation. However, from now on, as the appearance of existing commerce has changed to consumer-led e-commerce, it has proposed a plan to use arbitration to rescue consumers from damage as consumers as buyers grow in the market.

• Journal of the Korean Chemical Society
• /
• v.27 no.5
• /
• pp.330-339
• /
• 1983

The CNDO/2 and STO-3G calculations were performed on nitrogen, oxygen, and sulfur compounds in order to examine the effect of interactions between two nonbonding (n) orbitals in the same molecule separated by N intervening $\sigma$ bonds based on the PMO approach. Calculated basis level energies, energy splittings, and interaction energy changes for both chain and cyclic model compounds were qualitatively compared with the corresponding predictions derived from perturbational formalism for n-n orbital interactions and successfully explained in terms of the derived energy expressions. In general, through-space interaction term could be neglected in the N and O systems. And the calculated results were explained simply by through-bond interaction term. As a result, through-bond interaction placed n- below n+ for odd systems and n+ below n- for even systems. Also energy splittings in odd systems were larger than those in even systems. However, in the cases of cis-ethylene diamine and o-phenylene diamine(conformer VI in Table 4), through-space interaction term was found to be substantial and the opposing effects of through-space and through-bonds interactions were observed. Finally it was found that the interactions between two n orbitals on S atoms always had some contribution of the destabilizing through-space interaction term. This result was consistent with the fact that the lone pair lobes of third elements were larger in size than those of the second period elements.

• Steel and Composite Structures
• /
• v.31 no.6
• /
• pp.541-558
• /
• 2019

In Special Concentrically Braced Frames (SCBFs), vertical and horizontal components of the brace force must be resisted by column and beam, respectively but normal force component existing at the gusset plate-to-column and beam interfaces, creates out-of-plane action making distortion in column and beam faces adjacent to the gusset plate. It is a main concern in Hollow Structural Section (HSS) columns and beams where their webs and gusset plate are not in the same plane. In this paper, a new gusset plate passing through the HSS columns and beams, named as through gusset plate, is proposed to study the force transfer mechanism in such gusset plates of SCBFs compared to the case with conventional gusset plates. For this purpose, twelve SCBFs with diagonal brace and HSS columns and twelve SCBFs with chevron brace and HSS columns and beams are considered. For each frame, two cases are considered, one with through gusset plates and the other with conventional ones. Based on numerical results, using through gusset plates prevents distortion and out-of-plane deformation at HSS column and beam faces adjacent to the gusset plate helping the entire column and beam cross-sections to resist respectively vertical and horizontal components of the brace force. Moreover, its application increases energy dissipation, lateral stiffness and strength around 28%, 40% and 32%, respectively, improving connection behavior and raising the resistance of the normal force components at the gusset plate-to-HSS column and beam interfaces to approximately 4 and 3.5 times, respectively. Finally, using such through gusset plates leads to better structural performance particularly for HSS columns and beams with larger width-to-thickness ratio elements.