• Journal of Digital Convergence
• /
• 제10권4호
• /
• pp.1-9
• /
• 2012

Emerging three-dimensional television (3DTV) as a new IT product shows a possibility that television is not for just watching broadcasting, but an attractive tool for applying it to our real life. Three dimensional television is generally more effective and attractive than two-dimensional television (2DTV). But it still needs continuous technological improvement to solve its inherent limitations until many customers decide to purchase 3DTVs without hesitation. Innovative products like 3DTV encounter a quality problem leading purchase decision by customers. Quality is regarded as one of the most important factors affecting customers to adopt and use the product. Furthermore, measuring quality effectively is considerable for the 3DTV research. In this paper, we suggest the Analytic Hierarchy Process(AHP) method for evaluating 3DTVs in a view of quality. We describe quality criteria affecting the 3DTV selection through a literature survey and develope an analytical method for measuring quality. We classify the quality of 3DTV into four types and suggest a concept of the quality ratio as a measurement criteria instead of the quality gap. Though a numerical example, we show how priorities of 3DTV with versatile manufacturers is computed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.118-124
• /
• 1996

When computing the flow around complex three dimensional configurations, the generation of the grid is the most time consuming. This paper presents a survey of the grid generation technique. The technique for treating problems arising in gird generation for complex geometries is addressed. A general procedure for generating boundary conforming grids is included

• Geophysics and Geophysical Exploration
• /
• 제1권1호
• /
• pp.19-24
• /
• 1998

This paper deals with tomographic travel time inversion of three dimensional seismic refraction survey conducted over a dipping interface. The slowness, and thus velocity as its reciprocal, distribution on the subsurface interface is to be determined applying an ART with under-relaxtion parameter. The models chosen are realistic, i.e., most likely to be met in engineering seismics, and the interface includes anomalous zones. It is found that, generally speaking, the inversion could be misleading or meaningless without the correction of the dip of the interface. This is rather surprising when we recall that usual assumption for the interpretation of refraction seismics data is the horizontal attitude of structures within the limit of $15^{\circ}$ dip or so. To make the present method tenable for a new means of routine seismics, some practical ways of identifying head wave arrivals are to be devised.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• 제36권4호
• /
• pp.105-112
• /
• 2018

This study aims to apply 3D scanning technology to the field of landscape planning design. Through this, 3D scans were conducted on Soswaewon Garden and Seongrakwon Gardens to find directions for traditional landscape planning and designs. The results as follows. First, the actual measurement of the traditional garden through a 3D scan confirmed that a precise three-dimensional modeling of ${\pm}3-5mm$ error was constructed through the merging of coordinate values based on point data acquired at each observation point and postprocessing. Second, as a result of the 3D survey, the Soswaewon Garden obtained survey data on Jewoldang House, Gwangpunggak Pavilion, the surrounding wall, stone axis, and Aeyangdan wall, while the Seongnakwon Garden obtained survey data on the topography, rocks and waterways around the Yeongbyeokji pond area. The above data have the advantage of being able to monitor the changing appearance of the garden. Third, spatial information developed through 3D scans could be developed with a three-dimensional drawing preparation and inspection tool that included precise real-world data, and this process ensured the economic feasibility of time and manpower in the actual survey and investigation of landscaping space. In addition, modelling with a three-dimensional 1:1 scale is expected to be highly efficient in that reliable spatial data can be maintained and reprocessed to a specific size depending on the size of the design. In addition, from a long-term perspective, the deployment of 3D scan data is easy to predict and simulate changes in traditional landscaping space over time.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.410-415
• /
• 2003

Ground subsidence has occurred in the downtown of Muan-eup in Korea. Integrated geophysical survey, including two-dimensional resistivity, CSMT(Controlled source magnetotelluric), magnetic, borehole logging, GPR and resistivity tomography, has been conducted to investigate the cause of subsidence and ground conditions. Since the target area is in the city downtown, there were no spaces for surface geophysical methods. To get regional geology and to facilitate the detailed geophysical interpretation in the survey area, two-dimensional resistivity, CSMT and magnetic surveys have been applied in the outer region of the downtown. From these results, we could accurately define the Gwangju fault system and estimate the geologic conditions in the downtown. For the detailed survey of the downtown area, resistivity tomography and borehole logging data have been acquired using a few tens of densely located boreholes. Among these survey results, borehole logging data provided the guide to classification of the rock type and we could define the geologic boundary of granite and limestone formations. From the resistivity tomograms of 42 sections, which are densely located enough to be interpreted in a three-dimensional manner, we could delineate the possible weak zones or cavities in the limestone formations. In particular, resistivity tomograms in the subsided area showed the real image of ground subsidence. The map of hazardous zone has been derived from the joint interpretation of these survey results and we could provide the possible reinforcement strategy in this area.

• International Journal of Fluid Machinery and Systems
• /
• 제4권2호
• /
• pp.262-270
• /
• 2011

Experimental and numerical investigations were conducted for an internal flow in an axial flow stator of a diagonal flow fan. A corner separation near the hub surface and the suction surface of a stator blade was focused on, and further, three-dimensional vortices in separated flow were investigated by the numerical analysis. At low flow rate of 80% of the design flow rate, a corner separation of the stator between the suction surface and the hub surface can be found in both experimental and calculated results. Separation vortices are observed in the limiting streamline patterns both on the blade suction and on the hub surfaces at 80% of the design flow rate in the calculated results. It also can be observed in the streamline pattern that both vortices from the blade suction surface and from the hub surface keep vortex structures up to far locations from these wall surfaces. An attempt to explain the vortices within a three-dimensional separation is introduced by using vortex filaments.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.21-26
• /
• 2003

The visualization of three dimensional geophysical data is forcing a revolution in the way of working, and allowing the discovery and production of hydrocarbons at much lower costs than previously thought possible. There are many aspects of this revolution that are behind the scenes, such as the database structure, the storage and retrieval of data, and the exchange of data among programs. Also the user had changes where the interpreter (or manager, or processor) actually looks at and somehow interacts with the data. The use of opacity in volume rendering, and how its judicious application can assist in imaging geologic features in three dimensional seismic data. This revolutionary development of new technology is based on the philosophy of synergy of inter-disciplines of the oil industry. Group interaction fostered by large room visualization environments enables the integration of disciplines we strive for, by putting the petrophysicist, geologist, geophysicist, and reservoir engineer in one place, looking at one image together, without jargon or geography separating them. All these tools developed in the oil industry can be applied into the civil engineering industry also such as the prior geological and geophysical survey of the constructions. Many examples will show how three dimensional geophysical technology might make a revolution in the oil business industry now and in future. This change can be considered as a fusion process at data, information, and knowledge levels.

• Journal of the Korea Fashion and Costume Design Association
• /
• 제18권4호
• /
• pp.63-75
• /
• 2016

This study examines the organic geometry in Isabel Toledo's collections in terms of the practicality of American sportswear tradition. This study conducts literary survey combined with case analysis of Toledo's works from her debut collection in 1985 to the recent ones. The organic geometry in Toledo's designs refers to the conversion of two-dimensional garment patterns into three-dimensional garment forms with the body as a medium, which is classified into the following categories in this study. First, 'fluidity' describes Toledo's highly fluid jersey dresses which maintain consistent structures by patchwork draping and suspension technique. Second, 'reductionist structure' illustrates that simple geometric shapes such as circles and squares disappear as soon as worn on the body. Third, 'origami construction' explains folding two-dimensional fabrics into three-dimensional forms, which causes the outlines of the body to appear abstract. Toledo's designs deliver the tradition of American sportswear through the organic geometry of garment construction. Toledo's works are authentic American in the aspects that they are functional and modern; they satisfy the practical needs, prioritize the movements of wearers, pursue multi-functions, and their ornamental elements are accompanied by the construction of garments. Isabel Toledo presents designs drawing on her unwavering aesthetics while continuously developing and experimenting creative ways of garment construction.

• Journal of Korean Society for Geospatial Information Science
• /
• 제5권2호
• /
• pp.169-177
• /
• 1997

The purpose of this paper is to study the ideal Auto-surveying system and to establish the standard of work procedure involved with completing a precise three-dimensional topographic survey with RTK GPS equipment, a pen based personal computer, and real time CADD software. The fieldwork was done at a golf course which could be regarded as a heavy civil project site such as the reclamation and the site preparation work in December of 1997. The proposed Auto-surveying system and the work procedure in this paper is based on the data processing and the resultant topographic map of the golf course.

• Journal of Korean Society for Geospatial Information Science
• /
• 제6권2호
• /
• pp.11-20
• /
• 1998

Although aerial photogrammetry has been used to generate or update digital maps. It is difficult to make the spatial and attribute data for all kinds of objects on the ground with only aerial photogrammetry. Therefore, we are getting informations of the object on the ground through an on-the-spot survey In order to improve accuracy and reliability of on-the-spot survey in this study, we obtained stereo images from high resolution digital camera (1152*864 pixels) and developed the video photogrammetry which was able to determine the three dimensional coordinates from stereo images by applying DLT(Direct Linear Transformation). Also, the developed video photogrammetry could generate and update the spatial and attribute data in digital maps by using a function that could connect three dimensional coordinates with the attribute data.