• Spatial Information Research
• /
• v.11 no.1
• /
• pp.13-22
• /
• 2003

The study of geomorphology of tidal flat using remote sensing image has been considered useful because of it's ability to acquire data periodically. Especially, the Near Infrared band of satellite image has been used to divide between land and sea area. This study extracted a borderline of the tidal flat using Landsat-5 images and generated DEM(Digital elevation model) using tide level data as elevation value. DEM is a useful tool for three-dimensional survey of geomorphology and can be used for survey of tidal flat. This study divided 8 images of 1990's into two parts - before 1994 and after 1994 - and generated DEM respectively. In this work, the areas of tidal flats are calculated and it was revealed the area of tidal flat was decreased after 1994.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.45.2-45.2
• /
• 2014

To measure the mass distribution of galaxy systems weak-lensing analysis has been widely used because it directly measures the total mass of a system regardless of its baryon content and dynamical state. However, the weak-lensing only provides a map of projected surface mass density. On the other hand, galaxy redshift surveys provide a map of the three-dimensional galaxy distribution. It thus can resolve the structures along the line of sight projected in the weak-lensing map. Therefore, the comparison of structures identified in the weak-lensing maps and in the redshift surveys is an important test of the issues limiting applications of weak-lensing to the identification of galaxy clusters. Geller et al. (2010) and Kurtz et al. (2012) compared massive clusters identified in a dense redshift survey with significant weak-lensing map convergence peaks. Both assessments of the efficiency of weak-lensing map for cluster identification did not draw a general conclusion, because the sample is so small. Thus, we additionally perform deep imaging observations of fields in a dense galaxy redshift survey that contain galaxy clusters at z~0.2-0.5, using CFHT Megacam.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.422-431
• /
• 2003

Helicopter-borne electromagnetic (HEM) systems were originally developed for the exploration of mineral deposits. The frequency range of a conventional HEM system for mineral exploration, however, is relatively low and so not invariably suitable for its application to the fields of civil engineering because of its poor resolution in the shallower part of the earth. A DIGHEM HEM system was acquired by Nippon Engineering, with the frequencies chosen by the senior author. The five frequencies range from 220 Hz (the lowest) to 137,500 Hz (the highest). These frequencies improve the resolution of materials in the shallower part while maintaining a depth of investigation of greater than 100 m. This paper describes six case histories of geological and geotechnical surveys for civil engineering using HEM. These case histories include HEM surveys for investigating landslide, an alluvial area, root selection of road construction, areas related to dam and tunnel construction, and the simultaneous joint inversion of HEM and CSAMT data for a deep tunnel. These survey results show that HEM has sufficient resolution in both horizontal and vertical directins to contribute significantly to outlining the regional geology and its engineering problems.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.293-301
• /
• 2013

The purpose of this study was to find the space perception by the scene and to analyze the characteristics in the exhibition space. The data for the analysis was collected through a questionnaire survey method. The questionnaire is composed of a scene selection on the panoramic photographs of the exhibition space. 'The 4 Rivers Cultural Center - The ARK' was selected as the subject of this survey. The results of the study are presented as follows : First, the space perception perceived imaged scenes rather than the specific elements of space. Second, the space perception was revealed through the 'Form', 'Materials', 'Light', 'Lighting', 'Furniture' and 'Media' of notable elements. Also that was perceived by forming 'Line', 'Surface' and 'Volume'. Particularly, the perception of 'Surface' was higher than 'Line' and 'Volume'. 'Surface' was perceived mostly through the 'Color'. The perception of 'Line' was positive to 'Boundary' or 'Continuous placement of the light'. In addition, the perception of 'Volume' was positive to 'The curve of the form', 'Transparent material', 'Three-dimensional elements'. Finally, The type of space perception was chosen as 'Extension', 'Center', 'Deep', 'Boundary' and 'Formative'. In this way, the results of this study will set a foundation for developing design methods to induce the space perception by the scene in the exhibition space.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.5
• /
• pp.389-397
• /
• 2006

The purpose of the present paper is to offer an analysis of LiDAR data processing and three dimensional terrain for Geographic Information System (CIS) applications. Generally, LiDAR survey is the method which obtains quantitative and qualitative information of the terrain using airborne laser scanning (ALS). We will get a most topographic data at a Triangular Irregular Network (TIN), Digital Surface Model (DSM) and Digital Elevation Model (DEM) using LiDAR data. We examined many factors such as visibility, hillshade, aspect and slope using DEM and DSM. The analyzing results obtained from each item are thought to be regarded as leading factors in the terrain analysis. It is to be hoped that LiDAR survey will contribute a new approach to the terrain analysis.

• Economic and Environmental Geology
• /
• v.21 no.2
• /
• pp.131-137
• /
• 1988

Geological and electrical resistivity surveys were carried out to investigate subsurface geology and geologic structure of the Bonghwajae area in the Okchon zone. Pseudosections of the apparent electrical resistivity distribution along the three survey lines were obtained by using dipole-dipole electrode array method, and models of subsurface geology and geologic structure by using two dimensional finite difference method. The Bonghwajae fault zone exists around Bonghwajae area in the north-south direction, and is a boundary between Okchon Group and Choson Supper Group. Metabasite and hornblende gabbro intruded along the Bonghwajae fault zone remaining two fracture zones with low resistivity value of 20 ohm-m and widths of about 100m and 70-300m. They strike nearly N-S and dip westward with a high angle of $60-70^{\circ}$. Sochangri fault with a width of about 160m exists between Jisogori and Bonghwajae, by which Bonghwajae fault zone is displaced about 1km in the east-west direction. Hornblende gabbro whose electrical resistivity value is in the range of 5000-8000 ohm-m intruded the metabasite of 2000-4500 ohm-m after the Sochangri fault had formed. Great Limestone Group is widely distributed in the east of Bonghwajae fault zone, and interbeds so called Yongam formation of graphitic black slate with an extremely low electrical resistivity value of 2 ohm-m.

• Journal of the Korean Institute of Educational Facilities
• /
• v.21 no.2
• /
• pp.25-32
• /
• 2014

Many Korean university campuses are located on hilly terrain where the hierarchy of the path system is unclear. Therefore, it is difficult to analyze the pedestrian network through space syntax, in which only horizontal direction changes are considered as depths of space. The purpose of this study is to compare pedestrian movement patterns and space syntax analysis in order to find their relevance to each other and the relationship between them. We conducted a survey regarding the most-visited buildings and pathways at S-University, which is located on a hilly area in Seoul. The survey results were compared with the Space Syntax integration map by regression analysis. For the segments where the relationship between pedestrian volume and integration was weak, field observations were conducted. As a result, topographical aspects, functional aspects, and location aspects were observed as the main influential factors. In addition, the research proposes that adding an extra axial line per vertical directional change can potentially compensate for the low relevance of stairs. This study suggests the possibility and the necessity of three-dimensional space syntax programs and emphasizes the importance of campus planning for the pedestrian environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.5
• /
• pp.479-484
• /
• 2010

In the airborne laser survey with GPS/INS, based on kinematic, the installation and operation of GPS base stations is necessary to allow three-dimensional location coordinates to be obtained quickly and precisely. However, in many cases, GPS base stations operate under difficult conditions. In this paper, we investigate the substitutability of continuously operating reference stations (CORS) for base stations, and we examine the influence of the distance between aircraft GPS and CORS on the Z-value. The results of our study demonstrate that, if the performance of GPS base stations within regulation distance is replaced with that of CORS, sufficient accuracy is guaranteed. Moreover, the performance of CORS beyond regulation distance is fairly good.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.3
• /
• pp.308-315
• /
• 2019

This study examined the service quality attributes of the CVS (Convenient Store) packed meal products by applying the Kano model. The main survey was conducted by a research company using an online survey in the form of a self-administered questionnaire. The 499 samples were limited to customers who had experienced CVS packed meal products within the last months. A total of 14 service quality attributes of the CVS premium packed meal products were categorized as four attractive qualities, one must-be quality, three one-dimensional qualities and six indifferent qualities. According to the Better and Worse quotient designed by Timko, 'coupon and sales promotion event', 'healthy menu configuration', and 'balanced nutrition' had higher levels of the Better coefficient. On the other hand, 'hygiene and cleanliness', 'the delicious food', and 'fresh ingredients' showed a higher Worse coefficient. The results also suggest that each service quality attribute is not a single dimension but a complex attribute. As a result, this research suggests that marketing practitioners should immediately identify consumer's changing perception of quality to attract new customers and prevent existing customers from leaving in the CVS premium packed meal products segment.

• Fashion & Textile Research Journal
• /
• v.25 no.4
• /
• pp.439-448
• /
• 2023

Korea's original traditional costume designs have a great potential to be re-imagined from a global perspective and developed into high-value-added fashion culture products that can enter the international market. This study applied the structural features of traditional clothing to the design of fashion cultural products. This study developed designs using Beja, Sagyusam, Aekjuem-po, Danlyeong, Cheolrik, Jang-jegori of Korea. To the best of our knowledge, this study is the first to conduct a literature survey of traditional Korean clothing. We designed shirts using Adobe Illustrator and created a pattern with the Yuka program. This design was applied to a three dimensional virtual dressing system called CLO. A survey of individual interest in developed fashion cultural products was also conducted. The shirt designs were obtained by applying the details and structural characteristics of traditional Korean clothing. Among the six shirt designs, when asked which design would be suitable for wearing, gifting, or uniform, the shirts with the design of Danlyeong, Beja, and Sagyusam were generally highly preferred. This study can be used as basic data for the global market for fashion cultural products, and can contribute to the inheritance and development of culture and tradition by maintaining Korea's uniqueness in the modern global era and increasing tourism revenue.