• 정보처리학회논문지D
• /
• 제10D권2호
• /
• pp.211-220
• /
• 2003

지리정보시스템은 3차원 위상정보를 표현함으로써 사용자에게 정확하고 정교한 서비스를 제공한다. 이 때에 3차원 위상정보연산을 위해 차원변경방식과 서로 이질적인 공간모델을 사용해야 하는데, 이 방식을 사용할 때는 공간 연산이 어려울 뿐 아니라 서로 호환성이 부족한 문제가 발생한다. 따라서 이 논문에서는 이 문제를 해결하기 위하여 2차원 공간 객체 모델을 수용하는 3차원 공간 객체 모델을 제안하였고, 타당성을 보이기 위하여 구현하여, 그 실행을 보였다. 3차원 공간 위상 관계 연산자를 위하여 DE-9IM 방식을 3차원 개념으로 정의한 DE-9IM을 이용해서 설계하였고, 객체지향 개념을 지원하는 컴포넌트 환경에서 3차원 공간 위상 연산자를 구현하였다. 이 논문에서 제안된 3차원 공간 위상 연산자는 타 시스템과의 상호 운용성을 보장하며, 구현된 공간 위상 관계 연산을 이용하여, 3차원 공간 객체에 대한 효율적인 공간 질의를 수행할 수 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.885-890
• /
• 2002

As Geographic Information Systems represents three-dimensional topological Information, the systems provide accurate and delicate services for user. In order to execute three-dimensional topological operations, a dimensional transformation and heterogeneous spatial models should be used. However, the existing systems that use the dimensional transformation and the heterogeneous models, are not only difficult to operate the spatial operators, but also happened to support non- interoperability. Therefore, in order to support the spatial operation as well as interoperability between dimensions, we propose three-dimensional spatial operators for the proposed models. We defined the three-dimensional spatial operators prior to designing the proposed model. We also implemented the operators of proposed model and evaluated the implemented model on the component environment. Finally, the proposed model is able to not only support interoperability among systems but also execute spatial queries efficiently on three-dimensional spatial objects.

• 한국의류학회지
• /
• 제42권3호
• /
• pp.503-515
• /
• 2018

In this research, the three-dimensional structural and colorimetrical modeling of yarn-dyed woven fabrics was conducted based on the Kubelka-Munk theory (K-M theory) for their accurate color predictions. In the K-M theory for textile color formulation, the absorption and scattering coefficients, denoted K and S, respectively, of a colored fabric are represented using those of the individual colorants or color components used. One-hundred forty woven fabric samples were produced in a wide range of structures and colors using red, yellow, green, and blue yarns. Through the optimization of previous two-dimensional color prediction models by considering the key three-dimensional structural parameters of woven fabrics, three three-dimensional K/S-based color prediction models, that is, linear K/S, linear log K/S, and exponential K/S models, were developed. To evaluate the performance of the three-dimensional color prediction models, the color differences, ${\Delta}L^*$, ${\Delta}C^*$, ${\Delta}h^{\circ}$, and ${\Delta}E_{CMC(2:1)}$, between the predicted and the measured colors of the samples were calculated as error values and then compared with those of previous two-dimensional models. As a result, three-dimensional models have proved to be of substantially higher predictive accuracy than two-dimensional models in all lightness, chroma, and hue predictions with much lower ${\Delta}L^*$, ${\Delta}C^*$, ${\Delta}h^{\circ}$, and the resultant ${\Delta}E_{CMC(2:1)}$ values.

• Wind and Structures
• /
• 제25권6호
• /
• pp.537-549
• /
• 2017

In this study, the turbulent flow around a bluff body for different wind velocities was investigated numerically by using its two- and three-dimensional models. These models were tested to verify the validity of the simulation by being compared with experimental results which were taken from the literature. Variations of non-dimensional velocities in different positions according to the bluff body height were analysed and illustrated graphically. When the velocity distributions were examined, it was seen that the results of both two- and three-dimensional models agree with the experimental data. It was also seen that the velocities obtained from two-dimensional model matched up with the experimental data from the ground to the top of the bluff body. Particularly, compared to the front part of the bluff body, results of the upper and back part of the bluff body are better. Moreover, after comparing the results from calculations by using different models with experimental data, the effect of multidimensional models on the obtained results have been analysed for different inlet velocities. The calculation results from the two-dimensional (2D) model are in satisfactory agreement with the calculation results of the three-dimensional model (3D) for various flow situations when comparing with the experimental data from the literature even though the 3D model gives better solutions.

• Structural Engineering and Mechanics
• /
• 제69권5호
• /
• pp.499-509
• /
• 2019

While the wheel flat is an asymmetrical phenomenon in the railway, majority of researches have used two-dimensional models in the investigation of the effect of wheel flat on the wheel rail forces. This is due to the considerably low computational costs of two dimensional (2D) models although their reliability is questionable. This leaves us with the question of "what is the optimum modeling technique?". It is addressed in this research. For this purpose, two and three dimensional numerical models of railway vehicle/track interaction were developed. The three dimensional (3D) model was validated by comparisons of its results with those obtained from a comprehensive field tests carried out in this research and then, the results obtained from the 2D and 3D models were compared. The results obtained indicate that there are considerable differences between wheel/rail forces obtained from the 2D and 3D models in the conditions of medium to large wheel-flats. On the other hand, it was shown that the results of the 2D models are reliable for particular ranges of vehicle speed, railway track stiffness and wheel-fats lengths and depths. The results were used to draw a diagram, which presents the optimum modeling technique, compromising between the costs and accuracy of the obtained results.

• 대한치과교정학회지
• /
• 제27권1호
• /
• pp.129-140
• /
• 1997

본 연구는 교정 임상에서 흔히 촬영되는 측모와 정모 두부방사선규격사진을 사용하여 3차원적인 두개안면 형태를 재현하였을 때 그 방법의 정확성을 고찰해 보고, 기존의 측모 두부방사선규격사진과 비교하여 어떠한 차이를 보이는지 알아보고자 하였다. 이를 위해 두개안면 골격모형의 3차원 두부방사선규격사진을 형성하고, 선 계측과 각도 계측을 시행하였다. 여기서 얻어진 계측치들을 실제 계측치 및 측모 두부방사선규격사진에서의 계측치와 비교하여 다음과 같은 결론을 얻었다. 1. 3차원 두부방사선규격사진의 선 계측 평균 오차는 $0.94{\pm}0.62mm$, 평균 확대율 $100.31{\pm}0.91%$ 이었으며 실제 계측치와 차이를 보이지 않았다(${\alpha}=0.1$). 2. 측모 두부방사선규격사진은 선 계측에서 평균 오차 $6.44{\pm}1.48mm$, 평균 확대율 $106.99{\pm}1.45%$로서 하악체를 제외한 모든 선 계측에서 확대를 보였다(P<0.005). 3. 3차원 두부방사선규격사진에서의 각도 계측은 평균 오차 $1.22{\pm}0.82^{\circ}$, 평균 확대율 $105.72{\pm}12.07%$ 로서 실제 계측치와 차이를 보이지 않았다(${\alpha}=0.1$). 4. 측모 두부방사선규격사진은 평균 오차 $1.70{\pm}0.94^{\circ}$, 평균 확대율 $106.35{\pm}15.70%$으로 실제 계측치와 차이를 보이지 않았다 (${\alpha}=0.1$).

• 대한수학회보
• /
• 제58권5호
• /
• pp.1109-1127
• /
• 2021

We study the long-term dynamics for a family of incompressible three-dimensional Leray-α-like models that employ the spectral fractional Laplacian operators. This family of equations interpolates between incompressible hyperviscous Navier-Stokes equations and the Leray-α model when varying two nonnegative parameters 𝜃₁ and 𝜃₂. We prove the existence of a finite-dimensional global attractor for the continuous semigroup associated to these models. We also show that an operator which projects the weak solution of Leray-α-like models into a finite-dimensional space is determining if it annihilates the difference of two "nearby" weak solutions asymptotically, and if it satisfies an approximation inequality.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1754-1757
• /
• 1997

Three-dimensional optimum design of coat-hanger die is performed using power-law and Carreau models. It is found that the three-dimensional optimum design algorithm shows good convergence with the non-Newtonian fludis. the nore realistic optimum design is accomplished by employing Carreau model with the three-dimensional design method. The effect of vixcosity modles is investigated by comparing the optimum manifold profiles and flow rate distributions of power-law and Carreau modles. Through the accurated viscosity representation of Carreau model, the effect of total flow rate on the optimum manifold profile is investigated.

• 대한기계학회논문집A
• /
• 제29권7호
• /
• pp.990-997
• /
• 2005

The objective of this paper is to present the element connectivity parameterization (ECP) fur three dimensional problems. In the ECP method, a continuum structure is viewed as discretized finite elements connected by zero-length elastic links whose stiffness values control the degree of inter-element connectivity. The ECP method can effectively avoid the formation of the low-density unstable elements. These elements appear when the standard element density method is used for geometrical nonlinear problems. In this paper, this ECP method developed fur two-dimensional problems is expanded to the design of three-dimensional geometrical nonlinear structures. Among others, the automatic procedure converting standard finite element models to the models suitable for the ECP approach is developed and applied for optimization problems defined on general three-dimensional design domains.

• 대한치과교정학회지
• /
• 제46권1호
• /
• pp.13-19
• /
• 2016

Objective: The aim of this study was to compare the accuracy of Bolton analysis obtained from digital models scanned with the Ortho Insight three-dimensional (3D) laser scanner system to those obtained from cone-beam computed tomography (CBCT) images and traditional plaster models. Methods: CBCT scans and plaster models were obtained from 50 patients. Plaster models were scanned using the Ortho Insight 3D laser scanner; Bolton ratios were calculated with its software. CBCT scans were imported and analyzed using AVIZO software. Plaster models were measured with a digital caliper. Data were analyzed with descriptive statistics and the intraclass correlation coefficient (ICC). Results: Anterior and overall Bolton ratios obtained by the three different modalities exhibited excellent agreement (> 0.970). The mean differences between the scanned digital models and physical models and between the CBCT images and scanned digital models for overall Bolton ratios were $0.41{\pm}0.305%$ and $0.45{\pm}0.456%$, respectively; for anterior Bolton ratios, $0.59{\pm}0.520%$ and $1.01{\pm}0.780%$, respectively. ICC results showed that intraexaminer error reliability was generally excellent (> 0.858 for all three diagnostic modalities), with < 1.45% discrepancy in the Bolton analysis. Conclusions: Laser scanned digital models are highly accurate compared to physical models and CBCT scans for assessing the spatial relationships of dental arches for orthodontic diagnosis.