• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.438-445
• /
• 1999

The concentrations of some ions ($NO{_3}^-$, $Ca^{2+}$, $Mg^{2+}$, $NH{_4}^+$) in soil solution collected by zero tension lysimeter in mature Pinus rigida plantations in Goksung, Jeonranam-do were measured at two soil depths (10cm and 30cm) following various levels of cutting intensity treatment (uncut, $6m{\times}50m$, $10m{\times}50m$, $20m{\times}50m$ strip crearcutting) three times (July 6. July 30, and August 4) between June 20 and August 4 1998. The ion concentrations in the soil solution were significantly different among sampling times, while the concentrations were not different among cutting levels or sampling depths. The ion concentrations in the soil solution decreased in the order of $NO{_3}^-$ > $Ca^{2+}$ > $Mg^{2+}$ > $NH{_4}^+$ and the mean concentration was 3.60mg/L for $NO{_3}^-$, 1.7mg/L for $Ca^{2+}$, 0.5mg/L for $Mg^{2+}$, and 0.04mg/L for $NH{_4}^+$ respectively. These ion concentrations except for $NH{_4}^+$ ion were negatively correlated with the volume of collected soil solutions (r=-0.31~-0.41). The results suggest that the change of nutrient concentrations in the soil solution collected from the P. rigida plantations was related to the temporal input patterns of precipitation rather than the cutting intensity.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.2
• /
• pp.153-165
• /
• 1997

In male reproducible health, fertility and IVF (in-vitro fertilization), semen analysis has been most important. Semen analysis can be divided into concentration, motional and morphological analysis of sperm. The existing method which was developed earlier to analyze semen concentrated on the sperm motility analysis. To provide more useful and precise solutions for clinical problems such as infertility, semen analysis must include sperm morphological analysis. But the traditional tools for semen analysis are subjective, imprecise, inaccurate, difficult to standardize, and difficult to reproduce. Therefore, with the help of development of microcomputers and image processing techniques, we developed a new sperm morphology analyzer to overcome these problems. In this study the agreement on percent normal morphology was studied between different observers and a computerized sperm morphology analyzer on a slide-by-slide basis using strict criteria. Slides from 30 different patients from the SNUH andrology laboratory were selected randomly. Microscopic fields and sperm cells were chosen randomly and percent normal morphology was recorded. The ability of sperm morphology analyzer to repeat the same reading for normal and abnormal cells was studied. The results showed that there was no significant bias between two experienced observers. The limits of agreement were 4.1%${\sim}$-3.8%. The Pearson correlation coefficient between readers was 0.79. Between the manual and sperm morphology analyzer, the same findings were reported. In this experiments the slides were stained by two different methods, PAP and Diff-Quik staining methods. The limits of agreement were 7.2%${\sim}$-5.7% and 6.0%${\sim}$-6.3%, respectively. The Pearson correlation coefficients ware 0.76 and 0.91, respectively. The limits of agreement was tighter below 20% normal forms. In the experiments of repeatability, 52 cells stained by PAP and Diff-Quik staining methods were analyzed three times in succession. Estimating pairwise agreement, the kappa statistic for the pairs were 0.76, 0.81, 0.86, and 0.75, 0.88, 0.88 respectively. In this study it was shown that there was good agreement between manual and computerized assessment of normal and abnormal cells. The repeatability and agreement per slide of computerized sperm morphology analyzer was excellent. The computer's ability to classify normal morphology per slide is promising. Based on results obtained, this system can be of clinical value both in andrology laboratories and IVF units.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.229-234
• /
• 2010

The applicability of a commercial enzymatic time-temperature integrator (TTI) for monitoring spoilage of ground beef was investigated under isothermal storage condition at different temperatures. The volatile basic nitrogen (VBN) value was used as a spoilage index for ground beef. The time taken to reach the spoilage of ground beef stored at 4, 10, 15, 20, and ${25^{\circ}C}$ were 168, 114, 60, 48, and 24 hrs, respectively. However, these quality losses of beef were not coincided with the endpoints of the three different C-type TTIs (C-1, C-4, and C-7). In order to match the TTI response to the quality loss of beef, some ingredients such as enzyme and substrate solutions were extracted from C-1TTI and remixed with different amount of them in the tubes to constitute the modified TTIs. The responses of the modified CM-1 TTI were very close to the quality loss of beef stored at 20 and ${25^{\circ}C}$, but not at other temperatures tested. The response of the other modified CM-2 TTI was only matched to the quality loss of beef stored at ${15^{\circ}C}$. Therefore, systematic kinetic studies of food spoilage and the TTI response are required to apply the TTI as a quality indicator for a specific food.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.290-295
• /
• 1998

To optimize the formulation of acetaminophen liquid suppository, the effect of additives on the physicochemical properties of liquid suppository base was investigated. The physi cochemical properties of P 407/P 188 (15/15%) (abbreviated in 15/15) and P 407/P l88 (15/20%) (abbreviated in 15/20) were measured after the addition of following additives; 2.5% acetaminophen as an active ingredient, vehicle components (5% ethanol, 5% propylene glycol, 5% glycerin), preservatives (0.1% sodium benzoate, 0,1% methylparahydroxybenzoate, 0.1% propylparahydroxybenzoate) and 1% of sodium chloride as an ionic strength controlling agent. Poloxamer gel was prepared with three different buffer solutions (pH 1.2, 4.0 and 6.8) and the physicochemical properties, gelation temperature, gel strength and bioadhesive force, were determined. In the results, the effect of additives on the physicochemical properties was dependent on their bonding capacities including hydrogen bonding and cross-linking bonding. Because the hydrogen-bonding capacities of acetaminophen, ethanol and propylene glycol were smaller than that of poloxamer, the binding force of poloxamer gel became weak by their putting in between poloxamer gel. Therefore, the gelation temperature (15/15, $35.7^{\circ}C$ vs 37.0, 39.4 $38.2^{\circ}C$; 15/20, $29.2^{\circ}C$ vs 31.2, 32.0, $30.3^{\circ}C$) increased, and gel strength (15/15, 4.03 see vs 2.72, 2.08, 3.12sec; 15/20, 300g vs 50, 50, 200g) and bioadhesive force (15/15, $6.8{\times}10^2\;dyne/cm^2$ vs 3.2, 6.0, $6.0{\times}10^2\;dyne/cm^2$; 15/20, $97.3{\times}10^2\;dyne/cm^2$ vs 11.1, 89.5, $92.0{\times}10^2\;dyne/cm^2$) decreased. Furthermore, the binding force of poloxamer gel became strong due to the hydrogen-bonding capacities of glycerin and the cross-liking bonding of sodium salt. Then, the gelation temperature (15/15, 35.0, $32.1^{\circ}C$; 15/20, 26.0, $21.0^{\circ}C$) decreased, and gel strength (15/15, 6.51 see, 300g; 15/20, 500, 650g) and bioadhesive force (15/15, 7.2, $81.6{\times}10^2\;dyne/cm^2$; 15/20, 112.3, $309.2{\times}10^2\;dyne/cm^2$) increased. The effect of pH on the physicochemical properties of poloxamer gel was dependent on the ingredients with which the buffer solutions were prepared. Poloxamer gels prepared with pH 1.2 and 4.0 buffer solutions had the increasing gelation temperature (15/15, 37.5, $38.1^{\circ}C$; 15/20, 33.1, $34.0^{\circ}C$) and the decreasing gel strength (15/15, 2.98, 3.81sec; 15/20, 200, 200g) and bioadhesive force (15/15, $7.0{\times}10^2dyne/cm^2$; 15/20, $74.0{\sim}88.1{\times}10^2dyne/cm^2$) owing to HCl. Poloxamer gel prepared with pH 6.8 buffer solutions had the decreasing gelation temperature (15/15, $27.2^{\circ}C$; 15/20, $22.3^{\circ}C$) and the increasing gel strength (15/15, 400g; 15/20, 550g) and bioadhesive force (15/15, $207.0{\times}10^2dyne/cm^2$; 15/20, $215.0{\times}10^2dyne/cm^2$) due to the cross-linking bonding of $NaH_2PO_4\;and\;K_2HPO_4$.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.3
• /
• pp.191-201
• /
• 2016

Purpose: In the present study, the effect of artificial tears with different ingredients on tear film stability and subjective symptoms of dry eyes in the early stage of soft contact lenses wear was investigated. Methods: The three kinds of artificial tears and saline solution were respectively applied onto 50 dry eyes which wore soft contact lenses made of etafilcon A. Then, non-invasive tear film break-up time (NIBUT) was measured at every five minutes for 30 minutes right after the instillation of artificial tears, and the changes in blink rate and subjective symptoms were estimated after 30 minutes from the instillations. Results: All three kinds of artificial tears increased NIBUT larger than saline. The effect of increasing NIBUT immediately after the instillation of artificial tears was the largest when the artificial tear containing viscosity enhancer was used. The duration time of the effect was the longest when the artificial tear having both surfactant and viscosity enhancer was applied. The blink rate was not significantly changed when both artificial tears and saline solution were instilled. Subjective symptoms were significantly improved by the instillation of both artificial tears and saline solution and dryness, irritation, tiredness, stiffness, dazzling were improved by the use of most solutions. However, the subjective symptoms were rebounded to the level before the instillation of artificial tears after 30 minute-instillation. Conclusions: It was revealed that both artificial tears and saline solution could improve the subjective symptoms of dry eye in the early stage of soft contac lenses however, the effect of these solutions on the tear film stability was different according to the components. From the results, it is suggested that the proper selection of artificial tears is necessary for the improvement of dry eye symptoms at the early stage of soft contact lenses wear in dry eye.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.230-240
• /
• 1987

Half-sib seedlings of Ginkgo biloba (one-year-old) were treated with various simulated acid rains(pH2.0, pH3.0, pH4.0 and pH5.0) to examine the effects of acid rain on leaf surface area, leaf injury, leaf chlorophyll content and photosynthetic ability of the leaf tissue. The seedlings were grown in a pot($4500cm^3$) containing one of three different soils(nurseryy soil, mixed soil and sandy soil). Simulated acid rain was made by diluting sulfuric and nitric acid solution($H_2SO_4:HNO_3=3:1$, V/V) with tap water and tap water(pH6.4), and treated by 5mm each time for three minutes during the growing seasons(April to October 1985). Acid rain treatments were done three times per week to potted seedlings by spraying the solutions. The results obtained in this study were as follows : 1. Leaf surface area per seedling at pH2.0 level was the lowest among the levels of pH, but those at other pH levels were not significantly different. 2. Leaf injury(injured leaf rate and injured leaf area) increased with decreasing pH levels of acid rain. 3. Leaf chlorophyll content measured during the period June through October was significantly different among the soil types, and that of the seedling in nursery soil was the highest. The lower pH levels of simulated acid rain was treated ; more leaf chlorophyll content was measured at the beginning of treatment, and the more it severely decreased at the late growing period. 4. Photosyntetic abilities, and the highest value was shown in nursery soil. Significand difference in photosynthetic ability among the levels of pH was observed only in August. Photosynthetic ability increased with decreasing pH levels at the beginning of treatment, but decreased rapidly after July.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.248-254
• /
• 2015

Uptake of the triazole fungicides, fluquinconazole and tetraconazole from shoot part of onion was assessed by determining residual amounts of applied fungicides in edible and shoot parts of onion after the foliar application. Combined product of fluquinconazole and tetraconazole (14:7, v/v) as a 21% active ingredient of suspended emulsion formulation was diluted at ratio of 500 and 200 times and sprayed on the shoot part of onion after sealing its root part with absorbent paper. At 10 days after the pesticide application, fluquinconazole residue in the shoot part was the greatest as 5.2 mg/kg at 200 times-dilution treatment, while tetraconazole residue in this part was the smallest as 1.2 mg/kg at 500 times-dilution treatment. On the other hand, the pesticide residues in edible parts of onion at all the treatments were less than limits of detection, 0.01 mg/kg. However, fluquinconazole residues in the edible part of onion divided into three groups such as 1st, 2nd, and 3rd layers were detected at concentrations of 0.04 or 0.24 mg/kg, and these results show the different distribution of pesticides in onion depending on divided layers. In addition, chopped onions were soaked in pesticide solutions prepared with dilution of 1,000 times, cooked using three food processing types such as boiling, stir frying, and pickling, and the pesticide residues in them were analyzed. The analyzed results showed the largest pesticide dissipation in onion followed boiling process (76.9~92.6%).

• Parasites, Hosts and Diseases
• /
• v.21 no.2
• /
• pp.257-264
• /
• 1983

In order to obtain more specific antigenic preparation for the diagnosis of human paragonlmiasis, crude saline extract of whole worm (=PwWWE), secretory.excretory components (PwSEC) and secretion-excretion-free somatic extract (PwSM) of 12 week-old ParagoninBus westermani were filtrated through Sephadex G-200 gel column. The adult Paragonimus worms were obtained from expevimentally infected doge. A total of 11 antigenic solutions was Iyophilised or diluted to adjust protein content of 1mg/ml. To evaluate the antigenicity of crude antigens and fractions, micro-ELISA was done with the sera from P westermani in(ected cases, C. sinensis infected cases and non-infected control cases to detect Paragonimus specific IgG antibody. The results were as follows: 1. When the PwWWE was filtrated through Sephadex G-200 gel, it was separated into three fractions; PwWWE Fr. 1, PwWWE Fr. 2 and PwWWE Fr. 3. The percentage of protein content was 28.0%, 21.6% and 50.4% respectively. The PwSM was also. separated into three fractions; PwSM Fr. 1, PwSM Fr. 2, PwSM Fr. 3. and their percentage of protein content was 41.3%, 38.6% and 20.1%. However, the PwSEC showed different fractionation pattern; i.e. fraction 1 (=PwSEC Fr.1) and 3 (PwSEC Fr. 3) without fraction 2. The percentage of protein content was 14.0% in PwSEC Fr. 1 and 86.0% in PwSEC Fr. 3. 2. When the antigenicity of each Paragonimus crude antigen and fractionated antigen was evaluated for specific IgG aritibody by micro-ELISA in 10 human paragonimiasis sera, PwSEC Fr, 1 was the most potent antigen showing the mean absorbance 1.98. The PwWWE Fr. 1, PwSEC, PwWWE were next to that: their mean absorbance were 1.72, 1.38 and 0.83 respectively. The antigenicity of fractions 2 and 3 was much weaker in binding specific IgG antibody. 3. When the antigens were reacted in micro-ELISA with 10 human clonorchiasis sera, most antigens showed weak reactivity. Each fraction 1 of crude antigens reacted higher than other fractions or crude antigens; the mean absorbance was 0.17 in fraction 1, but in others the absorbances were about 0.06. 4. With non-infected control sera, the result of micro-RLISA revealed almost same pattern with those of the clonorchiasis sera. From the above results, it became apparent that PwWWE Fr. 1, especially PwSEC Fr. 1 was the most potent antigen reacted with Paragonisfaus specific IgG antibody.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.328-337
• /
• 2005

This work reports results of our study on the dynamic responses of the buried pipelines both along the axial and the transverse directions under various boundary end conditions. We have considered three cases, i.e., the free ends, the fixed ends, and the fixed-free ends for the axial direction, and three more cases including the guided ends, the simply supported ends, and the supported-guided ends for the transverse direction. In order to investigate the effect of the boundary end conditions for the dynamic responses of the buried pipeline, we have devised a computer program to find the solutions of the formulae on the dynamic responses (displacements, axial strains, and bending strains) under the various boundary end conditions considered in this study. The dynamic behavior of the buried pipelines for the forced vibration is found to exhibit two different forms, a transient response and a steady state response, depending on the time before and after the transfer of a seismic wave on the end of the buried pipeline. The former is identified by a slight change in its behavior before the sinusoidal-shaped seismic wave travels along the whole length of the pipeline whereas the latter by the complete form of a sinusoidal wave when the wave travels throughout the pipeline. The transient response becomes insignificant as the wave speed increases. We have observed a resonance when the mode wavelength matches the wavelength of the seismic wave, where the mode number(k) of resonance for the axial direction is found to be $\overline{\omega}/{\pi}V+1/2$ for the fixed-free ends, $\overline{\omega}/{\pi}V+1$ for the free ends, and $\overline{\omega}/{\pi}V$ for the fixed ends, respectively. By adding 10 more modes to the mode number(k) of resonance, we were able to study all the dynamic responses of the buried pipeline for the axial direction. On the other hand, we have not been able to observe a resonance in the analysis for the transverse direction, because the dynamic responses are found to vanish after the seventh mode. From the results of the dynamic responses at the many points of the pipeline, we have found that the responses appeared to be dependent critically on the boundary end conditions. Such effects are found to be most prominent especially for the maximum values of the displacement and the strain and its position.

• Journal of Food Hygiene and Safety
• /
• v.28 no.4
• /
• pp.287-292
• /
• 2013

The efficient elution of viruses from contaminated food is a critical step for its detection. In this study, conditions optimal for enteric viral recovery from three leafy vegetables (cabbage, lettuce, sesame leaf) and three root vegetables (carrot, onion, mooli) were analyzed to find common buffers (statistically not different) applicable to the leafy and root vegetables. Viral recovery varied depending on the food matrices or elution buffers. Buffer solutions containing 0.25M threonine / 0.3M NaCl (pH 9.5) or 0.25M glycine / 0.14M NaCl (pH 9.5) could efficiently recover poliovirus from five out of six vegetables. The threonine buffer was applied to one leafy vegetable (sesame) and one root vegetable (carrot) for genogroup II norovirus (NoV) detection. The detection sensitivity was significantly higher from the leafy vegetable compared to the root vegetable. The use of these common elution buffers should facilitate the detection of low levels of NoV and other enteric viruses in a wide range of vegetables.