• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.4
• /
• pp.525-532
• /
• 2009

The purpose of this study was to compare the ability of Northeast Asians to discriminate the salinity in salt solution and foods, and to compare their preference of salinity. Panels of Korean, Japanese and Chinese evaluated three kinds of samples that contained different level of salt such as salt solutions, julienned radish salad, Bulgogi. The salt levels had been manipulated to produce five samples of each one. The salt solutions were prepared by adding 0.3%, 0.7%, 1.1%, 1.5%, 1.9% salt into water. Different levels of salt in Julienned radish salad and Bulgogi were prepared by adding 0.5%, 1.5%, 2.5%, 3.5%, 4.5% salt to the recipe. The results of this study showed that the three ethnic groups had significant differences in their ability to distinguish the intensity of salinity in solutions containing a high contents of salt(1.5~1.9%). According to the regression analysis, Koreans(a=1.050) turned out to be the most able to detect the intensity of salinity, compared to the Japanese (a=0.988) and Chinese (a=0.807). All ethnic groups preferred a salt concentration of 0.3%, and the preference for this concentration was lower in Japanese than in Koreans and Chinese. There were significant differences in the perception of salinity in the julienned radish salad containing more than 3.5% salt between Koreans and Chinese. Koreans (a=1.168) appeared to be the most able to detect the intensity of salinity, compared to the Japanese (a=0.908) and Chinese (a=0.793). Both Koreans and Japanese had the strongest preference for the julienned radish salad containing a 1.5% salt concentration, while the Chinese preferred a salt concentraion of 2.5%. The ability of ethnic groups to detect the salinity in Bulgogi were significantly different at high salt -concentrations (more than 3.5%), and the awareness of salinity was as fallows : Koreans(a=0.161) > Japanese (a=0.896) > Chinese (a= 0.845). Koreans and Japanese had a higher preference or the Bulgogi containing a salt concentration of 1.5%, and the Chinese had higher preference at a salt concentration of 2.5%.

• Journal of Elementary Mathematics Education in Korea
• /
• v.21 no.1
• /
• pp.115-134
• /
• 2017

It is necessary to understand the characteristics of each type of division problems in other to help students develop a rich understanding when they learn each type of division problems. This study focuses on a specific type of division problems; a quotitive division as finding a scale factor in enlargement context. First, this study investigated via survey how 4th-6th graders and preservice and inservice elementary teachers solved a quotitive division relating to scaling problem. And semi-structured interviews with preservice and inservice elementary teachers were conducted to explore what knowledge they brought when they tried to solve enlargement quotitive division problems. Most of participants solved the given quotitive division problem in the same way. Only a few preservice and inservice teachers interpreted it as a proportion problem and solved in a different way. From the interviews, it was found that different conceptions of context and decontextualization, and different conceptions of times (as repeated addition or as a multiplicative operator) were connected to different solutions. Finally, three issues relating to teaching enlargement quotitive division were discussed; visual representation of two solutions, conceptions connected each solution, and integrating quotitive division and proportion in math textbooks.

• Mycobiology
• /
• v.42 no.1
• /
• pp.41-45
• /
• 2014

The effectiveness of three kinds of enzymes (chitinase, ${\beta}$-glucuronidase, and lysing enzyme complex), employed as elicitors to enhance the ${\beta}$-glucan content in the sawdust-based cultivation of cauliflower mushroom (Sparassis latifolia), was examined. The elicitors were applied to the cauliflower mushroom after primordium formation, by spraying the enzyme solutions at three different levels on the sawdust-based medium. Mycelial growth was fully accomplished by the treatments, but the metabolic process during the growth of fruiting bodies was affected. The application of a lysing enzyme resulted in an increase in the ${\beta}$-glucan concentration by up to 31% compared to that of the control. However, the treatment resulted in a decrease in mushroom yield, which necessitated the need to evaluate its economic efficiency. Although we still need to develop a more efficient way for using elicitors to enhance functional metabolites in mushroom cultivation, the results indicate that the elicitation technique can be applied in the cultivation of medicinal/edible mushrooms.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.612-623
• /
• 1994

Shock-wave focusing from a two-dimensional parabolic reflector was simulated using an explicit finite volume upwind TVD scheme. Computations were performed for three different incident shock speeds of $M_s$ = 1.1, 1.2 and 1.3, corresponding to the relatively weak, intermediate, and strong shock waves, respectively. Numerical solutions nicely resolved all the waves evolving through the focusing process. As the incident shock strength increase, a transition was observed in the shock-fronts geometry that was caused by the change in the reflection type of converging shock fronts on the axis of symmetry, from regular-type to Mach-type reflection. The computed maximum on-axis pressure amplification and the trajectories of three-wave intersections showed good agreement with experimental results. The strong nonlinear effect near the focal region which determines the shock-fronts geometries at and behind the focus and at the same time confines the pressure amplification at the focus was clearly revealed from the present numerical simulation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.4
• /
• pp.288-295
• /
• 1993

Three dimensional linear transient wave propagation over a constant depth due to bottom disturbances is presented. Present solution based on Seo(1993) is expressed in terms of a convolution integral of source function. For three cases of different source functions, each solution is proved to satisfy the corresponding initial condition. The general feature of wave height attenuation resulted from the dispersion effect is shown and discussed by numerical results of the solutions.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.59-80
• /
• 1997

Designing highly survivable interoffice telecommunication networks is considered. The problem is formulated as a minimum-cost network design problem with three node connectivity constraints. These valid and facet-defining inequalities for the convex hull of the solution are presented. A branch and cut algorithm is proposed based on the inequalities to obtain the optimal solution. With the lower bound by the cutting plane algorithm, a delete-ink heuristic is proposed to otain a good upper bound in the branch and bound procedure. The effeciveness of the branch and cut algorithm is demonstrated with computational results for a variety of problem sets : different lower bounds, two types of link costs and large number of links. The cutting plane procedure based on the three inequalities provides excellent lower bounds to the optimal solutions.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.4
• /
• pp.741-751
• /
• 1996

The three dimensional cutting-stock problem is to maximize the total value of pieces which are smaller cubics-cut from a original cubic stock. This paper suggests a method to maximize the total value of different size cut pieces using the orthogonal non-guillotine cut technique. We first formulated a zero-one integer programming, then developed a Lagrangeon relaxation method far the problem. The solutions were given by using a brunch-end-bound technique associates with Lagrangean relaxation, which guarantees an optimal solution.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.9
• /
• pp.854-857
• /
• 1996

Absorption and luminescence spectra of Eu3+ (aquo) and the two different 1: 3 Eu3+: ligand systems in aqueous solutions are measured under mild acidic pH condition. The oxydiacetate (ODA) and dipicolinate (DPA) ligands, forming the similar geometric complexes, are used in this work. The three intensity parameters, Ωλ (λ=2, 4, and 6) are empirically determined by applying the Judd-Ofelt theorem to the oscillator strengths of the six absorption bands arising from the ground 7F0 state. Among the three intensity parameters, the Ω2 is found to response markedly to a miner change in the ligand environment via the 7F0→5D0 transition. In addition, the relative oscillator strengths of the four luminescence bands in the visible region, assigned to the 5D0→7FJ (J=1, 2, 3 and 4) transitions are obtained to investigate their sensitivity to the ligand environment. Among the four bands, the 610 nm band, attributed to the 5D0→7F2 transition, shows hypersensitivity in the luminescence.

• Structural Engineering and Mechanics
• /
• v.69 no.5
• /
• pp.527-536
• /
• 2019

This paper will compare $T3{\gamma}_s$ and MITC3 elements, both these two elements are three-node triangular plate bending elements with three degrees of freedom per node. The formulation of the $T3{\gamma}_s$ and MITC3 elements is rather simple and has already been widely used. This paper will prove that the shear strain formulation of these two elements is identical even though they are obtained from two different methods. A single element is used to test the formulation of shear strain matrices. Numerical tests for circular plate cases compared with the exact solutions and with DKMT element will complete this review to verify the performances and show the convergence of these two elements.

• KIEAE Journal
• /
• v.16 no.1
• /
• pp.81-87
• /
• 2016

Purpose: Heat transfers phenomena are described by the second order partial differential equation and its boundary conditions. In a three-dimensional structure of a building, the heat transfer phenomena generally include more than one material, and thus, become complicate. The analytic solutions are useful to understand heat transfer phenomena, but they can hardly be applied in engineering or design problems. Engineers and designers have generally been forced to use numerical methods providing reliable results. Finite volume methods with the unstructured grid system is only the suitable means of the analysis for the complex and arbitrary domains. Method: To obtain an numerical solution, a discretization method, which approximates the differential equations, and the interpolation methods for temperature and heat flux between two or more materials are required. The discretization methods are applied to small domains in space and time, and these numerical solutions form the descretized equations provide approximated solutions in both space and time. The accuracy of numerical solutions is dependent on the quality of discretizations and size of cells used. The higher accuracy, the higher numerical resources are required. The balance between the accuracy and difficulty of the numerical methods is critical for the success of the numerical analysis. A simple and easy interpolation methods among multiple materials are developed. The linear equations are solved with the BiCGSTAB being a effective matrix solver. Result: This study provides an overview of discretization methods, boundary interface, and matrix solver for the 3-dimensional numerical heat transfer including two materials.