• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.46-52
• /
• 2009

A Multi-Core/Multi-Thread architecture is adopted for the Shader processor to enhance the processing performance. The Shader processor is designed to utilize its processing core IP for multiple purposes, such as Vertex-Shading, Rasterization, Pixel-Shading, etc. In this paper, we propose a 'Rasterization based on Vector Algorithm' that makes parallel pixels processing possible with Multi-Core and Multi-Thread architecture on the Shader Core. The proposed algorithm takes only 2% operation counts of the Scan-Line Algorithm and processes pixels independently.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.88-97
• /
• 2014

For the purpose of reproduction of traditional gold thread, the artifact investigation was organized for 70 cases (109 pieces) of relics from Korea, China and Japan. In most cases, the main backside material of gold thread from Korea was the bast fibers from paper mulberry. In this study, the optimum sheet-making of Hanji for gold thread reproduction was tried by controlling several process factors of Hanji such as the cooking and beating time of paper mulberry fibers, the number of sheet-making ply, and converting method (Dochim). Tensile index, folding endurance and compressive strength of Hanji showed differences according to the correlation between cooking and beating time, and application of converting method (Dochim), while bending stiffness fell with decrease of thickness. These results can be applied to consider manufacturing factors to make Hanji for the production of gold thread.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.27 no.4
• /
• pp.16-44
• /
• 2014

Objective : To search the trend of studying thread-embedding therapy in Korean medicine academia up to now and to expand the range of using thread-embedding therapy in the future, this study was designed. Methods : Using search portal sites the following; http://oasis.kiom.re.kr, http://www.riss.re.kr, collected 37 articles and devided those three parts and classificated those into four subsection as follows; total analysis, original article, case report. Results : The number of articles are 8 review articles, 14 original articles, 15 case reports. In the year 2013, 14 articles were published and ranked highest(37.8%). The journal of acupuncture & moxibustion medicine society ranked highest(40.5%). 5 persons ranked highest(32.4%) in number of author. Facial beauty care ranked highest(21.6%) in clssification of disease. Remedy item ranked highest(50.0%) in classification of subjects of 8 review articles. No more than 25 persons ranked highest(66.7%) and 6~12months of treatment period ranked highest(33.3%) in 14 original articles. Conclusions : Thread-embedding therapy is considered very useful on various part of Korean medicine clinic. We need to expand application scope of thread-embedding therapy in the future.

• Journal of Biomedical Engineering Research
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2021

Recently, various types of pedicle screws have been developed considering the anatomical structure of the spine. The purpose of this study was to evaluate the pullout stiffness and strength of two types of commercial pedicle screws. The design of two type screws were single pitched thread (ST) pedicle screw and dual pitched thread (DT) pedicle screw, respectively. The tests were conducted in accordance with the ASTM standards using polyurethane (PU) test blocks which has anatomical structure of the spine. There was no significant difference in pullout stiffness between two types of screw. However, DT exhibited higher pullout strength than ST (p<0.05). Pedicle screw with dual pitched thread showed higher pullout strength without decrease in pullout stiffness compared to the standard pedicle screw. In conclusion, dual pitched thread design of the pedicle screw is considered to be more suitable than the single pitched thread for the anatomical structure of the spine.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.72-79
• /
• 2024

This study focuses on combining traditional craft lacquer thread sculpture and augmented reality (AR) technology to develop digital educational content. In this way, we not only make it easier and easier for children to learn and understand the traditional craftsmanship of lacquer thread sculpture, but also finds a new direction for traditional craft education. First, through literature research, the production process of traditional craft lacquer thread sculpture is summarized. Through an in-depth understanding of traditional craft lacquer thread sculpture, it provides a theoretical basis for subsequent AR digital content development to achieve educational goals. Next, we used AR technology to design and produce the digital content of the traditional craft lacquer thread sculpture. This study proposes the application of AR technology and the design and production methods of digital content. It is hoped that the methods and experiences we have proposed will not only provide reference for the development of similar digital content in the future, but also provide new educational methods for the inheritance of traditional crafts.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.21 no.2
• /
• pp.153-167
• /
• 2005

The purpose of this study was to compare the v-shape thread with the square shape thread of fixture in the view of stress distribution pattern using finite element stress analysis. The finite element model was designed with the parallel placement of two standard fixtures(4.0 mm diameter ${\times}$ 11.5 mm length) on the region of mandibular 1st and 2nd molars. Three dimensional finite element model was created with the components of the implant and surrounding bone. This study simulated loads of 200 N at the central fossa in a axial direction (load A), 200 N at the buccal offset load that is 2 mm apart from central fossa in a axial direction (load B), 200 N at the buccal offset load that was 4 mm apart from central fossa in a axial direction (load C). These forces of load A',B',C' were applied to a $15^{\circ}$ inward oblique direction at that same site with 200 N. Von Mises stress values were recorded and compared in the supporting bone, fixture, and abutment screw. The following results have been made based on this study : 1. The highest stress concentration occurred at the cervical region of the implant fixture. 2. Von Mises stress value of off-site region was higher than that of central fossa region. 3. Square shape thread type showed more even stress distribution in the vertical and oblique force than V-shape thread type. 4. Stress distribution was the most effective in the case of buccal offset load (2, 4 mm distance from central fossa) in the square shape thread type. 5. V-shape thread type revealed higher von Mises stress value than square shape thread type in all environmental condition. The results from numerical analyses concluded that square shape thread type had the lower destructive stress and more stress distribution between the fixture and bone interface than V-shape thread type. Therefore, square shape thread type was regarded as optimal thread configuration in biomechanical concepts.

• 대한공업교육학회지
• /
• v.33 no.1
• /
• pp.265-281
• /
• 2008

The objective of this study is to show practice example let student experience about concurrent servers based multi-processes and multi-thread among the principles of data communication in ICT(information and communications technology). For this, we first implement multi-process server(fork server) and multi-thread server(thread server), and multi-thread client(thread client), Secondly, for experimental environment, we developed small ethernet networks and measure data transfer time with relation to the number of users. Experimental results show that mean transfer time of thread server is less than that of fork server by 20~61 % on average. Furthermore, it is found that the difference of data transfer time between fork server and thread server is proportional to that of the number of users. Main reason of performance difference dues to the difference between process forking time and thread creation time. We can also find that context switching for process and thread affects the load of web server. Our presentation and experimental results can be applied to used as the educational practice materials with which student can experience data communication principles.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.39-41
• /
• 2004

In this paper, I propose a thread scheduling policy for faster packet processing on the network processors with multithreaded multiprocessor architecture. To implement the proposed policy, I derived several basic parameters related to the thread scheduling and included a new parameter representing the packet contents and the features of the multithreaded architecture. Through the empirical study using a network processor, I proved the proposed scheduling ploicy provides better throughput and load balancing compared to the generally used thread scheduling policy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.4
• /
• pp.526-543
• /
• 2000

Finite element analyses were performed to study effects on stress distribution generated in jaw bone for various shapes of dental implants: plateau type, plateau with small radius of curvature, triangular thread screw type in accordance with ISO regulations and square thread screw filleted with small radius partially. It was found that square thread screw filleted with small radius was more effective on stress distribution than other dental implants used in analyses. Additional analyses were performed on the implant with square thread screw filleted with small radius for very-ing design parameters, such as the width of thread end, the height of the thread of the implant and load direction, to determine the optimum dimensions of the implant. The highest stress concentration occurred at the region in jaw Pone adjacent to the first thread of the implant. The maximum effective stress induced by a 15 degree oblique load of 100 N was twice as high as the maximum effective stress caused by an equal amount of vertical load. Stress distribution was more effective in the case when the width of thread end and the height of thread were p/2 and 0.46p, respectively, where p is the pitch of thread. At last, using tensile force calculated from the possible insert torque without breading bone thread, finite element analysis was performed on the implant to calculate pre-stress when the primary fixation of the implant was operated in jaw bone. The maximum effective stress was 136.8 MPa which was proven to be safe.

• Journal of the Korean Society of Costume
• /
• v.52 no.5
• /
• pp.145-154
• /
• 2002

1. The blended tabby whose warp and weft each employs a different kind of thread had been weaved since the era of the Three Kingdoms in this nation and since the period of Han in China. Especially in the 15th century. very finely weaved fabrics as the specialty of Chosun were exported to China. In the 16th century. blended tabby weaved with silk and cotton were often used for clothes as cotton was produced around the nation. And in the 17th century. blended tabby employing high quality Chinese raw silk other than existing ones were weaved. 2. It has been found in literature review that Honpo, one of Chosun's blended tabby. was manufactured mainly in Hamkyung, Cholla and Kyungsang provinces and mostly distributed through markets of Chungchong and Cholla provinces. 3. Out of the total 19 fabric pieces. 13 employed silk thread as the warp and cotton thread as the weft. Compared with the weft. in general. the warp is given more tension when weaved and more friction by spindles, being more likely to be twisted than the weft. In addition to starching, a stronger thread is requested as the warp. It is natural that in the Chosun period, silk thread more stronger than cotton thread was used as the warp to make more durable fabrics. For the weft requiring lots of threads when weaved. cotton thread was mainly used in the 17th century because the thread could be easily obtained at that time. 4. So far the study has made an empirical review of Chosun's blended tabby. especially those of the 15th∼17th century, in terms of their production and distribution. Findings from the study have some limit because they have been made focusing on the 15th∼17th century not the whole period of Chosun. Therefore it is needed to complement those findings through further studies.