• Corrosion Science and Technology
• /
• v.15 no.3
• /
• pp.135-140
• /
• 2016

Piping and equipment are degraded by flow-accelerated corrosion (FAC) in nuclear power plants. FAC causes numerous problems and nuclear utilities maintain programs to control FAC. The key parameters influencing FAC are hydrodynamic conditions, water chemistry, and effect of materials. Recently, a nuclear utility has planned slight power uprates in Korea. Operating conditions need to be changed in the secondary system according to power uprates. This study analyzed the effect of wall-thinning caused by power uprates. The change of operation data in the secondary cycle is reviewed, and wall-thinning rates are analyzed in the main lines. As a result, two phase (mixture of water and steam) lines have a greater impact than a water line under power uprate conditions. Also, the quality of steam is the most important factor for FAC in two phase lines.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.349-356
• /
• 2019

This study examines the effect of thinning in terms of changes in the growth characteristics of Chamaecyparis obtusa stands after they were thinned with varying intensity in Gochang, North Jeolla Province, Korea. Thinning was carried out in 2000 on Chamaecyparis obtusa stands (22 years old), and the stands were categorized in terms of the thinning intensity in the experiment: very heavy, heavy, medium, light, and control. The results of monitoring up to 2018 revealed that the diameter at breast height and the growth rate of individual trees after thinning had a positive correlation with the thinning intensity, whereas the stand volume showed a negative correlation. The height to diameter (H/D) ratio decreased by up to 70-80 due to the increased diameter at breast height after thinning and thereby resulted in better quality. The relative yield index right after the first thinning was between 0.75 and 0.95, which suggests the best timing for the first thinning had been missed. This study's findings are expected to serve as a basic reference in establishing the thinning system for Chamaecyparis obtusa forests.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.165-171
• /
• 2011

This study was conducted to investigate the effect on pine wilt disease by health-thinning, thinning and sapling tending in red pine forest (Pinus densiflora). As a part of developing forestry control methods for pine wilt disease control. In case of putting in pine sawyer (Monochamus alternatus) with pine wood nematode (Bursaphelenchus xylophilus), the specimen trees in health-thinning, thinning and control treatment were withered more than 50%, although there were not statistically significant differences in treatments. In treatment site, thinning slashes had influenced on the spread of pine wilt disease (experiment 1). In thinning stand of sapling pine, site with thinning slashes had highest mortality (> 90%). There were approximately 10% mortality in the site of carried thinning slashes from case and the site of non-thinning with released M. alternatus (experiment 2). The larvae had not appeared in young tree stump with health-thinning and thinning at April, the current emergence year of M. alternatus, but there were larvae in sapling tree stump with thinning at May, the current emergence year of M. alternatus. In case of stands with infected young and sapling tree by pine wilt disease, there is no effects of on pine wilt disease control by health-thinning, thinning, saplings tending at April and May, the current emergence year of M. alternatus, and leaved thinning slashes had influenced on the spread of pine wilt disease as habitation of M. alternatus.

• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.146-152
• /
• 1995

A mucogingival grafting procedure has been developed to cover denuded root surfaces. The subepithelial connective tissue graft is composed of a free connective tissue graft and an overlying pedicle graft. The source of connective tissue graft were trap door approach and thining of a full thickness palatal flap. The purpose of this study was compare a two different connective tissue obtaining method. In this study, where palatal pocket was present, pocket elimination was performed, and the tissue normally discarded after thinning of the palatal flap was used as a grafting material. The results were as follows : 1. The mean difference between trap door approach and thinning procedure for root coverage were $2.1{\pm}O.lmm$, $2.2{\pm}O.2mm$. 2. The mean difference between trap door approach and thinning procedure for pocket depth change were $O.2{\pm}O.lmm$, $O.2{\pm}O.2mm$. 3. The mean difference between trap door approach and thinning procedure for attachment gain were $2.1{\pm}O.2mm$, $2.4{\pm}O.2mm$. 4. The esthetics in recipient site, both color match and tissue contour, were acceptable to the patient in all cases. 5. Therefore, thinning procedure were similar to trap door approach in root coverage effect.

• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.89-95
• /
• 2012

U.S. Electric Power Research Institute (EPRI) has developed CHECWORKS program and applied it to power plant piping lines since some lines were ruptured by flow-accelerated corrosion (FAC) in 1978. Nowadays the CHECWORKS program has been used to manage pipe wall thinning phenomena caused by FAC. However, various erosion mechanisms can occur in carbon-steel piping. Most common forms of erosion are cavitation, flashing, liquid droplet impingement erosion (LDIE), and Solid Particle Erosion (SPE). Those erosion mechanisms cause pipe wall thinning, leaking, rupturing, and even result in unplanned shutdowns of utilities. Especially, in two phase condition, LDIE damages a wide scope of plant pipelines. Furthermore, LDIE is the major culprit to cause such as power runback by pipe leaking. This paper describes the methodologies that manage wall thinning and also predict LDIE wall thinning area. For this study, current properties of two-phase condition are investigated and LDIE areas are selected. The areas are checked by B-Scan method to detect the effect of wall thinning phenomena.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.1 s.74
• /
• pp.51-58
• /
• 2007

This study on the effects of local wall-thinned location on the fracture behavior of pipes was carried out, and the results were compared with the analytical results. Local wall-thinning for the bending test was machined with various sizes on the outside of pipes, in order to simulate the metal loss, due to erosion/corrosion. In addition, we had carried out FE analysis for the pipes with local wall thinning on the inside, and its results were comparatively studied with that of the outside. Three-dimensional elasto-plastic analyses were able to accurately simulate fracture behaviors of inner or outer wall thinning. Fracture types, obtained from the experiments and analyses, could be classified into ovalization, local buckling and crack initiation, depending on the thinned length and thinned ratio. Based on the results, the fracture behaviors of pipes with the outer wall thinning can be applied to estimate the fracture behaviors of pipes with the inner wall thinning.

• Journal of Ecology and Environment
• /
• v.48 no.2
• /
• pp.137-143
• /
• 2024

Background: The study was carried out to analyze the temporal changes of trade-offs (TOs) between two ecosystem services (ESs) before and after thinning in a Pinus koraiensis plantation on Mt. Gari from 2006 to 2021. As target variables, aboveground carbon (AGC) storage and species richness (SR) were chosen for regulating and supporting services. Thinning was applied from 2007 through 2008 with three treatments: 1) light thinning (LT), 2) heavy thinning (HT), and 3) control (Con). Results: Thinning influenced both AGC and SR. In 2021, AGC in the Con (111.1 t C ha^-1) was significantly higher compared to the LT (82.0 t C ha^-1) and HT (60.4 t C ha^-1) after thinning from 2007 to 2008. Also, SR was marginally higher in the LT (94 species) than in the Con (55 species) and HT (87 species) in 2011. Relative benefits of AGC and SR showed similar trends with the obtained values. In addition, the effects of thinning on TO varied among treatments and over time, demonstrating different degrees of TO between the two ESs. In the LT, TO was 0.13 in 2006 and slightly increased to 0.2 by 2021. TO in the HT exhibited a relatively rapid increase from 0.22 in 2006 to 0.58 by 2021, while To in the Con fluctuated, rising to 0.36 in 2011 from 0.1 in 2006 and decreasing to 0.25 by 2021. Among the three treatments, the degree of TOs between the two ESs was the lowest in the LT. Conclusions: Depending on thinning intensities, the responses of ESs and the degree of TOs vary. Regarding the balance between enhancements and TOs in ESs among treatments, the LT treatment showing intermediate carbon storage, higher SR, and lower TOs will be a proper silvicultural application.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2977-2982
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle - installed downstream of the high pressure turbine extraction steam line - inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical analysis results using the FLUENT code and the down scale experimental data which effect on disclosing of the shell wall thinning of the high pressure feedwater heaters by porous plate.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.199-204
• /
• 2008

The generation of axisymmetric Lamb waves and interaction with wall thinning (corrosion) defects in hollow cylinders are simulated using the finite element method. Guided wave interaction with defects in cylinders is challenged by the multi-mode dispersion and the mode conversion. In this paper, two longitudinal, axisymmetric modes are generated using the concept of a time-delay periodic ring arrays (TDPRA), which makes use of the constructive/destructive interference concept to achieve the unidirectional emission and reception of guided waves. The axisymmetric scattering by the wall thinning extending in full circumference of a cylinder is studied with a two-dimensional FE simulation. The effect of wall thinning depth, axial extension, and the edge shape on the reflections of guided waves is discussed.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.38-46
• /
• 2010

The wall thinning phenomenon of pipes was simulated as metal loss due to erosion and corrosion. Such wall thinning defects in the pipes of power plants are a very important safety consideration. In this study, we analyzed wall thinning defects that occurred by weld bead of weld zone of boost pump recirculation pipe. From the results of the analysis of pipe failures, numerical analysis was performed by Fluent v6.3.26 using the standard k-$\varepsilon$ model of the weld bead shape, such as an elliptical or a spherical shape, on the inner wall of the pipe. Using the results obtained, we showed the overlap effect by cavitations corrosion and erosion-corrosion at the bottom of the wall-thinning defect.