• 한국전기전자재료학회논문지
• /
• 제22권4호
• /
• pp.350-354
• /
• 2009

$Al_{2}O_{3}$ thin films were deposited on GaN(0001) by using a Remote Plasma Atomic Layer Deposition(RPALD) technique with a trimethylaluminum(TMA) precursor and oxygen radicals in the temperature range of $25{\sim}500^{\circ}C$. The growth rate per cycle was varied with the substrate temperature from $1.8{\AA}$/cycle at $25^{\circ}C$ to $0.8{\AA}$/cycle at $500^{\circ}C$. The chemical structure of the $Al_{2}O_{3}$ thin films was studied using X-ray photoelectron spectroscopy(XPS). The electrical properties of $Al_{2}O_{3}$/GaN Metal-Insulator-Semiconductor (MIS) capacitor grown at a $300^{\circ}C$ process temperature were excellent, a low electrical leakage current density(${\sim}10^{-10}A/cm^2$ at 1 MV) at room temperature and a high dielectric constant of about 7.2 with a thinner oxide thickness of 12 nm. The interface trap density($D_{it}$) was estimated using a high-frequency C-V method measured at $300^{\circ}C$. These results show that the RPALD technique is an excellent choice for depositing high-quality $Al_{2}O_{3}$ as a Sate dielectric in GaN-based devices.

• 전자공학회논문지D
• /
• 제36D권1호
• /
• pp.29-37
• /
• 1999

La 농도에 따른 PLT 박막을 sol-gel법으로 제작하여, La 농도가 PLT 박막의 전기적 특성에 미치는 영양을 조사하였다. La 농도가 5 mol%에서 28 mol%로 증가함에 따라 10KHz의 주파수에서 비유전률은 428에서 761로 증가하였고 유전손실은 0.063에서 0.024로 감소하였으며, 누설전류밀도는 150kV/cm의 전기장에서 6.96${\mu}A/cm^2$에서 0.79${\mu}A/cm^2$으로 감소하는 추세를 보였다. La 농도에 따른 PLT 박막의 이력곡선을 측정한 결과, La의 농도가 5mol%에서 28mol%로 증가함에 따라 잔류분극은 9.55${\mu}C/cm^2$ 에서 1.10${\mu}C/cm^2$ 으로 항전계는 46.4kV/cm에서 13.7kV/cm로 감소하였다. La 농도를 5 mol%에서 28 mol% 까지 변화시킨 PLT 박막에 대한 피로특성을 조사한 결과, La 농도가 증가할수록 피로특성이 현저히 개선됨을 알 수 있었다. 특히, La 농도가 28mol%인 PLT 박막의 경우, 상유전상을 가지며 5V에서 전하축적밀도와 누설전류밀도는 각각 134fC/${\mu}cm^2$과 1.01${\mu}A/cm^2$ 이었으며, La 농도가 10mol%인 PLT 박막은 6.96${\mu}C/cm^2$의 잔류분극과 40.2kV/cm의 항전계를 가졌다. 또한 ${\pm}5V$ 의 사각펄스를 $10^9$회 가한 후에도 잔류분극의 값이 약 20% 감소하는 비교적 우수한 특성을 나타내었다. 결론적으로, La이 10mol% 와 28mol% 첨가된 PLT 박막은 각각 NVFRAM과 차세대 DRAM 용 캐패시터 절연막으로 사용될 수 있는 매우 유망한 재료라 생각할 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.723-727
• /
• 2003

[ $Sr_xBa_{1-x}Nb_2O_6$ ] (SBN, $0.25{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient and a nonlinear electro-optic coefficient value. In spite of its advantages, SBN has not been investigated well compared to other ferroelectric materials with perovskite structure. In this study, SBN thin film was manufactured by ion beam sputtering technique using the prepared SBN target in $Ar/O_2$ atmosphere. SBN30 thin film of $1000{\AA}$ was pre-deposited as a seed layer on $Pt(100)/TiO_2/SiO_2/Si$ substrate followed by SBN60 deposition up to $3000{\AA}$ in thickness. As-deposited SBN60/SBN30 layer was heat-treated at different temperatures of 650, 700, 750, and $800^{\circ}C$ in air, respectively The crystallinity and orientation behavior as well as electric properties of SBN60/SBN30 multi-layer were examined. The deposited layer was uniform and the orientation was shown primarily along (001) plane from XRD pattern. There was no difference in the crystal structure with heat-treatment temperature, but the electric properties depended on the heating temperature and was the best at $750^{\circ}C$. In electric properties of Pt/SBN60/SBN30/Pt thin film capacitor prepared, the remnant polarization (2Pr) value was $15{\mu}C/cm^2$, the coercive field (Ec) 75 kV/cm, and the dielectric constant 1075, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 제5회 영호남 학술대회 논문집
• /
• pp.85-88
• /
• 2003

$Sr_xBa_{1-x}Nb_2O_6$(SBN, $025{\leq}x{\leq}0.75$) ceramic is a ferroelectric material with tetragonal tungsten bronze (TTB) type structure, which has a high pyroelectric coefficient and a nonlinear electro-optic coefficient value. In spite of its advantages, SBN has not been investigated well compared to other ferroelectric materials with perovskite structure. In this study, SBN thin film was manufactured by ion beam sputtering technique using the prepared SBN target in Ar/$O_2$ atmosphere. SBN30 thin film of 500 ${\AA}$ was pre-deposited as a seed layer on Pt(l00)/$TiO_2$/$SiO_2$/Si substrate followed by SBN60 deposition up to 4500 ${\AA}$ in thickness. SBN60/SBN30 layer was deposited at different Oxygen amount of 0, 8.1, 17, and 31.8 sccm, respectively. The crystallinity and orientation behavior as well as electric properties of SBN60/SBN30 multi-layer were examined. The deposited layer was uniform and the orientation was shown primarily along (001) plane from XRD pattern. The crystal structure and the electric properties depended on the Oxygen amount, heating temperature and was the best at O2 = 8.1 seem, $750^{\circ}C$. In electric properties of Pt/SBN60/SBN30/Pt thin film capacitor prepared, the remnant polarization (2Pr) value was 13 ${\mu}C/cm^2$, the coercive field (Ec) 75 kV/cm, and the dielectric constant 1492, respectively.

• 한국재료학회지
• /
• 제17권2호
• /
• pp.96-99
• /
• 2007

The effects of post-annealing of high-k $HfO_2$ thin films grown by atomic layer deposition method were investigated by the annealing treatments of $400-600^{\circ}C$. $Pt/HfO_2/p-Si\;MOS$ capacitor structures were fabricated, and then the capacitance-voltage and current-voltage characteristics were measured to analyze the electrical characteristics of dielectric layers. The X-ray diffraction analyses revealed that the $500^{\circ}C-annealed\;HfO_2$ film remained to be amorphous, and the $600^{\circ}C-annealed\;HfO_2$ film was crystallized. The annealing treatment at $500^{\circ}C$ resulted in the highest capacitance and the lowest leakage current due to the reduction of defects in the $HfO_2$ films and non-crystallization. Our results suggest that post-annealing treatments are a critical factor in improving the characteristics of gate dielectric layer.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.286-291
• /
• 2015

Nd:YAG 레이저의 출력조절을 위하여 LLC 공진 컨버터를 사용하였다. ZVS(Zero Voltage Switching) 방식을 LLC 공진형 컨버터에 적용함으로써 스위칭 손실을 최소화하였다. 금속박막의 점용접과 같은 레이저가공에 있어서 단일 펄스에 대한 출력에너지가 가공특성을 결정하므로, 적절한 목표출력으로 단일펄스 당 50 [J]로 결정하였다. 따라서 레이저 출력은 출력전류를 변화시켜가면서 측정하고 분석하였다. 이 때, 전류는 커패시터의 충전전압의 크기에 따라 변한다. 이러한 결과로부터 충전 커패시터의 용량 12,000 [${\mu}F$], 반복율이 1 [Hz]일 때, 방전전압 620 [V], 방전전류 861 [A]에서 58.2 [J]의 레이저빔 최대 출력을 얻음으로써 전기에너지 입력에 대한 레이저빔 출력에너지 변환효율은 2.52%를 달성하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 1996

Ta$_2$O$_{5}$ film ale recognized as promising capacitor dielectric for future DRAM\`s. The electrical properties of Ta$_2$O$_{5}$films greatly depend on the heating condition. In the practical fabrication process, several annealing process, such as the annealing of Al in H$_2$(about 40$0^{\circ}C$) and reflow of BPSG (borophosphosilicate glass) film in $N_2$(about 80$0^{\circ}C$), exist after deposition of Ta$_2$O$_{5}$ film. In this paper, we describe the temperature effect on the electrical properties of W/Ta$_2$O$_{5}$/Si structure. The thin film of Ta$_2$O$_{5}$ and tungsten have been deposited on p-si(100) wafer using the sputtering system. The heating temperature was varied from 500 to 90$0^{\circ}C$ in $N_2$for 30min and The degree of temperature is 100\`C. In a log(J/E$^2$) Vs 1/E plot of typical I-V data, we find a linear relationship for the temperature of 500, $600^{\circ}C$ and as deposition. This could indicate Fowler-Nordheim tunneling as the dominant mode of current transports. However, we can not find a linear relationship for the temperature above $700^{\circ}C$. This could not indicate Fowler-Nordheim tunneling as the dominant mode of current transport. The high frequency (1MHz) capacitance-voltage (C-V) of W/Ta$_2$O$_{5}$/Si Capacitor were investigated on the basis of shift in the threshold voltage and dielectric constant. The magnitude of the threshold voltage and dielectric constant depends on the heating temperature, and increases with heating temperature.temperature.

• 한국진공학회지
• /
• 제2권2호
• /
• pp.246-254
• /
• 1993

DRAM 커패시터에서 축정용량을 증대시키기 위한 기초연구로서 2가지 방법을 시도하였다. 첫째로, 커패시터의 유효 표면적을 증대시키기 위해 HSG(hemispherical grain)와 rugged 형태의 표면형상을 갖는 폴리실리콘 전극을 저압 화학기상증착법을 이용하여 제잘하였다. 그 결과 기존의 평평한 폴리실리콘 전극에 비하여 유효면적이 증대된 폴리실리콘 전극이 형성되었다. 둘째로, 고유 전상수를 갖는 $Ta_2O_5$ 박막을 각각의 전극에 플라즈마 화학기상증착법으로 증착시키고 후열처리한 후 전기적 특성변화를 조사하였다. MIS(metal-insulator-semiconductor) 구조의 커패시터를 제작하여 전기적 특성을 측정한 결과, HSG와 rugged 형상의 표면을 갖는 전극에서 기존의 평평한 표면을 갖는 전극에 비하여 축전용량은 1.2~1.5배까지 증대하였으나, 주설전류는 표면적의 증가에 따라 함께 증가함을 보였다. TDDB 특성에서도 HSG와 rugged 형상의 표면을 갖는 전극들이 평평한 표면형상에 비하여 더 열화되었음을 보여주었다. 이상과 같은 결과는 $Ta_2O_5$ 유전박막을 이용한 차세대 DRAB 커패시터 연구에 기초자료로 이용될 수 있을 것으로 본다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1546-1548
• /
• 2001

The $Sr_{0.8}Bi_{2.4}Ta_2O_9$(SBT) thin films are deposited on Pt-coated electrode(Pt/$TiO_2$/ $SiO_2$/Si) using RF magnetron sputtering method. With increasing annealing temperature from 600[$^{\circ}C$] to 850[$^{\circ}C$], Bi-layered perovskite phase was crystallized above 650[$^{\circ}C$]. The dielectric constant is 213 at annealing temperature of 750[$^{\circ}C$] and dielectric loss have a stable value within 0.1. Leakage current density is $1.01{\times}10^{-8}A/cm^2$ at annealing temperature of 750[$^{\circ}C$].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.743-746
• /
• 2000

Metal-ferroelectric-insulator-semiconductor(MFIS) devices using Pt/$LiNbO_3$/Si structure were successfully fabricated. The dielectric constant of the AIN film calculated from the capacitance in the accumulation region in the capacitance-voltage(C-V) curve was about 8.2. The gate leakage current density of MIS devices using a aluminum electrode showed the least value of 1$\times$$1O^{-8}$A/$cm^2$ order at the electric field of 500kV/cm. The dielectric constant of $LiNbO_3$film on AIN/Si structure was about 23 derived from 1MHz capacitance-voltage (C-V) measurement and the resistivity of the film at the field of 500kV/cm was about 5.6$\times$ $1O^{13}$ $\Omega$.cm.