• 전자공학회논문지D
• /
• 제36D권4호
• /
• pp.63-69
• /
• 1999

본 연구에서는 급속 열처리 온도와 분위기를 변화 시키면서 Pt/BST/Pt 커패시터의 전기적 특성 변화를 알아보고, 특성 개선에 대한 체계적인 원인을 분석하였다. 급속 열처리의 온도와 분위기에 따른 Pt/BST/Pt 커패시터의 전기적 특성 변화는 BST 박막 내의 산소 결핍과 관련이 있는 것으로 보인다. 이러한 사실을 확인하기 위하여 450℃, 20mttorr에서 산소와 산소 플라즈마 분위기에서 각각 열처리를 수행한 후 전기적 특성을 비교하였다. 산소 플라즈마에서 열처리를 수행한 BST 커패시터의 누설전류 전류밀도가 단순히 산소 분위기에서 열처리 한 시편과 비교하여 훨씬 낮았다. 또한, 산소 분위기에서 열처리를 수행한 BST 커패시터의 유전율이 약14%정도 감소한 반면, 산소 플라즈마에서 열처리를 수행한 유전율은 거의 감소가 없었다. 위의 결과는 반응성이 강한 산소 원자를 많이 포함하고 있는 산소 플라즈마가 산소 결핍을 보상하는데 있어서 매우 효과적임을 시사하고 있다. 결과적으로, BST박막 내의 산소 결핍이 BST커패시터의 누설전류 밀도와 유전율에 큰 영향을 미치고 있음을 추정할 수 있다. 그리고, 산소 플라즈마에서 열처리를 수행함으로써 유전율의 감소 없이 누설전류 밀도가 크게 개선된 BST커패시터를 얻을 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제8권3호
• /
• pp.49-53
• /
• 2001

유도결합형 플라즈마 (ICP-RIE) 장치를 이용하여 SBT ($SrBi_2Ta_2O_9$)/Si의 수직식각 실험을 하였다. 이와 같은 실험의 목적은 수직 단면구조의 강유전체 gate구조 및 capacitor 제조에 있어서 유효면적을 확보하고 parasitic effect를 최소화 하는 기술이 우수한 소자 특성을 얻기 위해 매우 중요한 기술이기 때문이다. $Ar/C1_2$를 반응가스로 사용하였으며 $Ar/C1_2$유량비를 각각 1, 0.8, 0.6, 0.4로 바꾸어 가면서 각 유량비에 대해 RF power를 700, 600, 500W로 변화시키는 동안 DC power를 각각 200, 150, 100, 50 W로 변화시키면서 식각 실험을 하였다. 식각조건 변화에 따른 수직 및 수평 식각율, 선택식각율, 감광막의 보호성, 리소그라피 조건에 따른 식각율 및 식각단면 구조의 특성, 식각율 변화에 따른 패턴 크기의 변화, SBT의 식각 단면 특성 등을 조사하였다. $Ar/C1_2$유량비가 0.8, RF power 700 W, DC power 200 W 일 때 식각속도는 1050 A/min으로 최적의 식각율을 확인하였다. 그리고 주사전자현미경의 관찰 결과 수 적도는 $82^{\circ}C$ 정도로 매우 양호함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.10-10
• /
• 2009

Transparent BNO thin films were grown on Al-doped ZnO (AZO)/Ag/AZO/polyethersulfon (PES) (abbreviated as AAAP) transparent electrodes at a low temperature by the NCD technique. The BNO films grown on the crystallized AZO/Ag/AZO (AAA) electrodes exhibit an amorphous phase with a root mean square (rms) roughness of approximately 2 nm in the range of deposition temperature. The capacitors (Pt/BNO/AAAP) with BNO films grown at $100^{\circ}C$ show a dielectric constant of 24 and dissipation factor of 8% at 100 kHz, a leakage current density of about $8{\times}10^{-6}A/cm^2$ at an applied voltage of 1.0V. The optical transmittances of the BNO/AAAP exhibited above 80% at wavelength of 550nm at all of deposition temperature. The mechanical stability of the BNO/AAA as well as AAA electrode with the PES substrates through the bending was ensured for flexible electronic device applications. The transparent BNO capacitors grown on AAAP are powerful candidate for integration with the transparent solar cells.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.263-266
• /
• 2001

In this paper, we investigated dielectric properies for BST thin films that was deposited on MgO/Si substrates using RF magnetron sputtering. In here, MgO film was used to perform that a diffusion b arrier between the BST film and Si substrate and a buffer layer to assist the BST film growth. A d eposition condition for MgO films was RF Power of 50W, substrate temperature of room temperature and the working gas ratio of Ar:O$_2$ were varied from 90:10 to 60:47. Finally we manufactured the cap acitor of Al/BST/MgO/Si/Al structure to know electrical properties of this capacitor through I-V, C-V measurement. In the results, C-V aha racteristic curves was shown a ferroelectric property so we measured P-E. A remanent poliazation and coerceive electric field was present 2$\mu$C/cm$^2$ and -27kV/cm respectively at Ar:O$_2$=90:10. And a va clue of dielectric constant was 86 at Ar:02=90:10.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.179-179
• /
• 2009

This is for the electrical characterization by IDC pattern using BST$(Ba_{0.5}Sr_{0.5}TiO_3)$ thin film. BST materials had been chosen for high frequency applications due to it's high permitivity and tunability. The BST thin films have been deposited on $Al_2O_3$ Substrates by Nd-YAG pulsed laser deposition with a 355nm wavelength at $700\;^{\circ}C$. The post deposition annealing at $750^{\circ}C$ in flowing $O_2$ atmosphere for 1 hours. The capacitance of IDC patterns have been measured from 1 to 10 GHz as a function of electric field ($\pm40$ KV/cm) at room temperature using inter-digital Au electrodes deposited on top of BST. The IDC patterns have three type of fingers number. For the 10 pairs finger was the best capacitance onto $Al_2O_3$ substrate. The capacitance was 0.9pF. Also Dielectric constant was been 351 at 100 mTorr and annealing temperature $750^{\circ}C$ for 1 hour. The loss tangent was been 0.00531.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.209-212
• /
• 2001

High quality Taros thin films have been obtained from anodizing. The as-deposited amorphous films have excellent physical and electrical properties: refractive indices ~2.15, dielectric constants ~25, and leakage currents <10$^{-8}$ Ac $m^{-2}$ at 1MV $cm^{-1}$ , 700$\AA$ thickness. We fabricated a MIM element with theses T $a_2$ $O_{5}$ films which had perfect current-voltage symmetry characteristics using a new process technology which was post annealing of whole MIM element instead of conventional annealing conditions (top-electrode metals, annealing conditions) on the capacitor performances were extensively discussed throughout this work.k.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.25.2-25.2
• /
• 2011

Recently, thin film capacitors used for vehicle inverters are small size, high capacitance, fast response, and large capacitance. But its applications were made up of liquid as electrolyte, so its capacitors are limited to low operating temperature range and the polarity. This research proposes using Ni-P alloys by electroless plating as the electrode instead of liquid electrode. Our substrate has a high aspect ratio and complicated shape because of anodic aluminum oxide (AAO). We used AAO because film thickness and effective surface area are depended on for high capacitance. As the metal electrode instead of electrolyte is injected into AAO, the film capacitor has advantages high voltage, wide operating temperature, and excellent frequency property. However, thin film capacitor made by electroless-plated Ni on AAO for full-filling into etched tunnel was limited from optimizing the deposition process so as to prevent open-through pore structures at the electroless plating owing to complicated morphological structure. In this paper, the electroless plating parameters are controlled by temperature in electroless Ni plating for reducing reaction rate. The Electrical properties with I-V and capacitance density were measured. By using nickel electrode, the capacitance density for the etched and Ni electroless plated films was 100 nFcm-2 while that for a film without any etch tunnel was 12.5 nFcm-2. Breakdown voltage and leakage current are improved, as the properties of metal deposition by electroless plating. The synthesized final nanostructures were characterized by scanning electron microscopy (SEM).

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2004년도 추계총회 및 연구발표회 초록집
• /
• pp.81.4-81.4
• /
• 2004

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.123-127
• /
• 2002

DRAM용 capacitor의 차세대 전극물질 후보 중의 하나인 Ru 박막을 고밀도의 ECR 플라즈마를 이용하여 식각 특성 및 식각 메커니즘을 알아보고자 하였다. 식각시 Ru은 oxygen들과 결합을 하여 RuO2 화합물들을 생성하고 RuO2 화합물들은 다시 oxygen들과 결합을 함으로써 휘발성이 강한 RuOx 화합물들을 생성하였다. 하지만 이러한 식각이 이루어지기 위해서는 oxygen이온들에 의한 충돌이 필요하며, Cl과 F 가스들을 첨가가 의해 충돌 이온의 에너지가 증가되어 RuO2와 O radical들의 반응성을 향상시켰다. 이에 휘발성이 좋은 RuO4들의 형성속도를 증가시킴으로써 식각 속도를 향상시킬 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.150-152
• /
• 2002

This paper, experiment manufactures device of Metal/Poly-$\gamma-Benzyl\;_D-Glutamate$ Organic Films/Metal structure using PBDG and I-V properties and C-F properties. The I-V characteristic is measured that approve voltage from 0 to +2[V] of device and the distance between electrode is larger, could know that small current flow and thin film could know that had insulation property. C-F characteristic has each other affinity between the polarization amount and frequency. Dielectric constant of MIM device could know by dipole that is voluntary polarization of LB film that polarization is happened. The capacitor properties of a thin film is better as the distance between electrodes is smaller.