• Korean Journal of Plant Resources
• /
• v.29 no.5
• /
• pp.598-603
• /
• 2016

The aim of this study was to elucidate the influence of vigor of a bearing shoot in ‘Bluecrop’ Highbush Blueberry (Vaccinium corymbosum L.) on growth characteristics of shoots and fruits. Bearing shoots were classified with BS (bearing shoot) and BMB (bearing mother branch). The vigor of bearing shoots were divided into four arbitrary categories; A was thin (< 6.0 ㎜) BMB and short (< 10 ㎝) BS, B was thin BMB and long (≥ 10 ㎝) BS, C was thick (≥ 6 ㎜) BMB and short BS and D was thick BMB and long BS. Shoots from D were longer (6.5 ㎝) and thicker (1.70 ㎜) than those from the others. Shoots of D had more leaves (5.8 ea) than those of the others. Leaf area of D was larger (13.5 ㎠) than those of the others. The first harvest of D was one week faster than the others. Ratio of big berry (>14 ㎜) from the long BSs was higher (B : 41.7, D : 46.8%) than that from the short BSs. Soluble solid content of small berrys did not show any different according to vigor of bearing shoots, but soluble solid content of big berrys of the long BSs was higher (B : 16.2, D : 15.6°Bx) than those of the short BSs. The thickness of BMB did not affect ratio of fruit size and soluble soild content. The long BSs would be proper than the short BSs for bearing bigger fruits.

• Korean journal of food and cookery science
• /
• v.22 no.4 s.94
• /
• pp.419-427
• /
• 2006

The purpose of this study is to promote the substitution of rice flour for wheat flour in making bread and thus the consumption of rice by examining the effect of particle size of rice flour on leavening rice bread. For this purpose, several experiments were carried out. With regard to particle size distribution, 59.45% of wheat flour had passed 200 mesh and 3 kinds of rice flour milled to penetrate into 20, 35, and 45 mesh (S1, S2 and S3) had passed 21.88%, 33.1% and 36.38% of those for 200 mesh, respectively. To leaven the rice flour dough to bread, 25% of vital gluten was needed. To determine the optimal water quantity for rice bread dough, the hardness of wheat and rice flour dough was measured by rheometer. The appropriate water quantity for S1, S2 and S3 was set at 285 ml , 295 ml and 335${\sim}$340m1, respectively. The loaf volume index of the wheat flour bread was 6.24, while that of and rice flour bread S1, S2 and S3 was 5.38, 5.50 and 5.75, respectively. These results indicated that the loaf volume index of rice flour bread is lower than that of wheat flour bread, but that the volume of rice flour bread was increased with fuel particle size of rice flour. Scanning electron microscopy (SEM), image of the wheat bread tissue at a magnification of 35 times showed long, large, oval-shaped, air cells and thin cell membrane, as well as small air cells, whereas the images of rice flour showed angular, circular, air cells and rough and thick cell membrane. The size and number of air cells in the rice bread were larger in S2 and S3 with fuel particle flours than in S1. In particular, the bread made with S3 contained many air cells that were as large as those in the wheat bread were. In addition, when the inner cell wall was magnified 1500 times, almost no small air cell was observed in C and S3, whereas many fine air cells were observed in the cell wall of S1 and S2.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.92-92
• /
• 2014

Recently, many state-of-art spectroscopy techniques are used to unravel the mysteries of condensed matters. And numerous heterostructures have provided a new avenue to search for new emergent phenomena. Especially, near the interface, various forms of symmetry-breaking can appear, which induces many novel phenomena. Although these intriguing phenomena can be emerged at the interface, by using conventional measurement techniques, the experimental investigations have been limited due to the buried nature of interface. One of the ways to overcome this limitation is in situ investigation of the layer-by-layer evolution of the electronic structure with increasing of the thickness. Namely, with very thin layer, we can measure the electronic structure strongly affected by the interface effect, but with thick layer, the bulk property becomes strong. Angle-resolved photoemission spectroscopy (ARPES) is powerful tool to directly obtain electronic structure, and it is very surface sensitive. Thus, the layer-by-layer evolution of the electronic structure in oxide heterostructure can be investigated by using in situ ARPES. LaNiO3 (LNO) heterostructures have recently attracted much attention due to theoretical predictions for many intriguing quantum phenomena. The theories suggest that, by tuning external parameters such as misfit strain and dimensionality in LNO heterostructure, the latent orders, which is absent in bulk, including charge disproportionation, spin-density-wave order and Mott insulator, could be emerged in LNO heterostructure. Here, we performed in situ ARPES studies on LNO films with varying the misfit strain and thickness. (1) By using LaAlO3 (-1.3%), NdGaO3 (+0.3%), and SrTiO3 (+1.7%) substrates, we could obtain LNO films under compressive strain, nearly strain-free, and tensile strain, respectively. As strain state changes from compressive to tensile, the Ni eg bands are rearranged and cross the Fermi level, which induces a change of Fermi surface (FS) topology. Additionally, two different FS superstructures are observed depending on strain states, which are attributed to signatures of latent charge and spin orderings in LNO films. (2) We also deposited LNO ultrathin films under tensile strain with thickness between 1 and 10 unit-cells. We found that the Fermi surface nesting effect becomes strong in two-dimensions and significantly enhances spin-density-wave order. The further details are discussed more in presentation. This work was collaborated with Hyang Keun Yoo, Seung Ill Hyun, Eli Rotenberg, Ji Hoon Shim, Young Jun Chang and Hyeong-Do Kim.

• Applied Microscopy
• /
• v.41 no.2
• /
• pp.129-137
• /
• 2011

The aim of this study was to evaluate the inhibitory effect of nude pack containing black tea water extract (NPBT) on skin wrinkle formation in hairless mice. Skin wrinkles were induced by UVB irradiation to the backs of hairless mice for 5 weeks. And at the same time, NPBT was applied topically. Wrinkle formation, histological changes, expression of matrix metalloproteinase-3 (MMP-3) and protein activities of MMP-2 and MMP-9 were observed or analyzed. Wrinkles for the control group were formed as a pattern of deep furrows and thick crests. Whereas wrinkles for the NPBT treated group were formed as a pattern of shallow furrows and thin crests, and their wrinkle areas were significantly (p<0.001) lower than the control group. Collagen fibers were arranged irregularly and sparse in density and some elastic fibers were degenerated in the control group, while they were almost intact in the NPBT treated group. MMP-3 mRNA expression in the control group was significantly (p<0.001) higher than the normal group, and that of NPBT treated group was significantly (p<0.001) lower than the control group. The NPBT treated group showed remarkably lower protein activities of MMP-2 and MMP-9 than the control group. NPBT could have a considerable inhibitory effect on skin wrinkle formation in hairless mice.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.356-360
• /
• 2011

Indium oxide ($In_2O_3$) single layer and $In_2O_3$/copper (Cu) bi-layer films were prepared on glass substrates by RF and DC magnetron sputtering without intentional substrate heating. In order to determine the effect of the Cu bottom layer on the optical, electrical and structural properties of $In_2O_3$ films, 3-nm-thick Cu film was deposited on the glass substrate prior to deposition of the $In_2O_3$ films. As-deposited $In_2O_3$ films had an optical transmittance of 79% in the visible wavelength region and a sheet resistance of 2,300 ${\Omega}/{\square}$, while the $In_2O_3$/Cu film had optical and electrical properties that were influenced by the Cu bottom layer. $In_2O_3$/Cu films had a lower sheet resistance of 110 ${\Omega}/{\square}$ and an optical transmittance of 71%. Based on the figure of merit, it can be concluded that the Cu bottom layer effectively increases the performance of $In_2O_3$ films for use as transparent conducting oxides in flexible display applications.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.1
• /
• pp.27-32
• /
• 1970

A study on the purification of the surf clam Mactra Sulcataria REEVE for the remove of sand and fecal piles was conducted in the laboratory. The sand was mostly distributed around the inhalent and exhalent siphon, mantle and gill, and were also distributed in the digestive tract including the mid-gut gland. The sand particles in the digestive tract were extremely small and their sizes were about $180\times10\mu\;to\;550\times200\mu$. It could be seen that there was little, if any, difference in the rate of sand removal when either the hanging Purification method was used or the method of laying the surf clams in thick or thin layers on the bottom of the experimental vessel was used. The surf clam removed about $50\%$ of its sand during the first hour of purification. The weight of the removed sand and fecal piles on a dry basis reached a constant value after 22 to 26 hours of purification. After 42 hours of Purification, no sand could be seen in the fecal piles. The surf clam removed the sand in its body more rapidly when it was in sea water with the pH of 8.75 than when it was in natural sea water. Also high temperature had a much greater depressing effect upon the removal of sand In the surf clam than did natural sea water. Also low salinity had greater accelerating effect upon the removal of sand in the body than did natural sea water. However the surf clam died when the salinity was $8.19\%_{\circ}$.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.41-46
• /
• 2014

The property improvement of polycarbonate coated with a multilayer film composed of an inorganic $SiO_2$ film and a photocatalytic $TiO_2$ film was studied. The $SiO_2$ film as a binder had an excellent light transmission characteristic. After the treatment with atmospheric pressure plasma, the surface of $SiO_2$ film showed the hydrophilicity, which increased the film coating uniformity with a $TiO_2$-containing aqueous solution. When $TiO_2$ film was over 200 nm thick, the absorption effect of UV rays in the range of 180~400 nm suppressed the yellowing phenomena of polycarbonate substrate. The inorganic film improved the heat resistance of polycarbonate substrates. $TiO_2$ film in the outmost under the exposure of UV rays promotes the catalytic oxidation characteristics and yields the capability to the decomposition of organic contaminants, and also increases the self-cleaning properties due to the increase of hydrophilicity. Structural stability of the polycarbonate substrate coated with inorganic $TiO_2$ and $SiO_2$ film was shown. The role of $SiO_2$ film between $TiO_2$ and polycarbonate substrate suppressed the peeling of $TiO_2$ film by inhibiting the photocatalytic oxidation effect of $TiO_2$ film on the polycarbonate substrate.

• Journal of Industrial Convergence
• /
• v.21 no.10
• /
• pp.57-63
• /
• 2023

This study aims to elucidate the effect of glycyrrhizic acid on smooth muscle contraction and to determine the detailed mechanism incorporated. We hypothesized that glycyrrhizic acid played a role in the agonist-sensitive management of smooth muscle contraction. Stripped smooth muscles of Sprague-Dawley rats were prepared in organ baths and isometric tensions were converted, stored and analyzed by using isometric transducers, a physiograph and one way ANOVA. Interestingly, glycyrrhizic acid attenuated the thick filament regulating agonist (fluoride or thromboxane mimetic)-sensitive contraction (p=0.113, 0.008, 0.004 (Student's t-test), p=0.113, 0.008, 0.004 (One way ANOVA) at 0.01, 0.03, 0.1 mM fluoride, and p=0.156, 0.004, 0.003 (Student's t-test), p=0.156, 0.004, 0.003 (One way ANOVA) at 0.01, 0.03, 0.1 mM thromboxane mimetic) and did not attenuate the thin filament regulating agonist (phorbol ester)-induced contraction (p=0.392, 0.086, 0.065 (Student's t-test), p=0.392, 0.086, 0.065 (One way ANOVA) at 0.01, 0.03, 0.1 mM phorbol ester). It is suggesting that endothelial EDRF (NO) synthesis and accessory pathways besides endothelial EDRF (NO) synthesis such as ROCK restriction might be incorporated in the glycyrrhizic acid-induced modulation of smooth muscle contraction inhibiting acto-myosin interaction.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.1
• /
• pp.78-84
• /
• 2009

In this paper, ZnO:Al thin film was deposited on polyethylene terephthalate(PET) substrate by capacitively coupled r. f. magnetron sputtering method from a ZnO target mixed with 2wt[%] Al2O3 to investigate the possible application of ZnO:Al film as a transparent conducting electrode for film typed DSCs. The effect of substrate bias on the electrical properties and film structure were studied. The results showed that a positive bias applied to the substrate during sputtering contributed to an improvement of electrical properties of the film by attracting electrons in the plasma to bombard the growing films. These bombardments provided additional energy to the growing ZnO:Al film on the substrate, resulting in significant variations in film structure and electrical properties. Electrical resistivity of the film decreases significantly as the positive bias increases up to +30[V] However, as the positive bias increases over +30[V], the resistivity decreases. The transmittance varies little as the substrate bias is increased from 0 to +60[V], and as r. f. powers increases from 160[W] to 240[W]. The film with electrical resistivity as low as $1.8{\times}10^{-3}[{\Omega}-cm]$ and optical transmittance of about 87.8[%] were obtained for 1,012[nm] thick film deposited with a substrate bias of +30[V].

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.52-61
• /
• 2003

$SrBi_2Ta_2O_9(SBT)$and$ZrO_2$thin films for MFIS structure(Metal-Ferroelectric-Insulator-Semiconductor) were deposited by RF magnetron sputtering method. In order to investigate the effect of heat treatment of insulator layers and MFIS structure, the insulator layers were heat treated from $550^{circ}C;to; 850^{\circ}C$in conventional furnace or RTA furnace under$O_2$and Ar ambient, respectively. After then, C-V characteristics and leakage current were measured. The capacitor with 20 nm thick $ZrO_2$layer treated at RTA$750^{circ}C;in;O_2$ atmosphere had the largest memory window. The C-V and leakage current characteristics of the$Pt/SBT(260nm)/ZrO_2(20nm)/Si$structure were better than those of$Pt/SBT(260nm)/Si$ structure. These results showed that$ZrO_2$films took a role of buffer layer effectively.