• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.539-543
• /
• 2011

LNG cargo containment system (CCS) has the primary function of ensuring adequate thermal insulation with keeping natural gas below its boiling point. From the viewpoint of structural design, this LNG CCS can be treated as a laminated composite structure showing complex structural responses under the sloshing load which can be defined as a violent behavior of the liquid contents in cargo tanks due to external forced motions. As LNG CCS type, Mark III containment system from TGZ is considered in this paper and then its structural strength assessment is performed based on a simple higher-order shear deformation theory and maximum stress, maximum strain, Tsai-Wu failure criteria developed for laminated composite plates. The assessment is performed to the initial failure of the Mark III CS plate by investigating failure locations and loads.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.120-127
• /
• 1998

This paper deals with the dynamic responses of the multi-span continuous bridge with longitudinal shear keys. It is motivated by a need to understand the effects of longitudinal shear keys which may be used for the reduction of the longitudinal seismic force in continuous bridges. The results show that (1) The force reduction of fixed pier is proportional to the ratio of gap size and elastic maximum displacement of the bridges without shear keys ; (2) The thermal movement has little effect on the response of the continuous bridges with shear keys. Also the simplified equation is proposed to calculate the maximum response of the continuous bridges with longitudinal shear keys. The equation requires only the elastic analysis results of the bridge and the gap size between superstructure and shear keys.

• Steel and Composite Structures
• /
• v.27 no.6
• /
• pp.761-775
• /
• 2018

In the present work, the recently developed non-polynomial shear deformation theories are assessed for thermo-mechanical response characteristics of laminated composite plates. The applicability and accuracy of these theories for static, buckling and free vibration responses were ascertained in the recent past by several authors. However, the assessment of these theories for thermo-mechanical analysis of the laminated composite structures is still to be ascertained. The response characteristics are investigated in linear and non-linear thermal gradient and also in the presence and absence of mechanical transverse loads. The laminated composite plates are modelled using recently developed six shear deformation theories involving different shear strain functions. The principle of virtual work is used to develop the governing system of equations. The Navier type closed form solution is adopted to yield the exact solution of the developed equation for simply supported cross ply laminated plates. The thermo-mechanical response characteristics due to these six different theories are obtained and compared with the existing results.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.7
• /
• pp.967-975
• /
• 2000

Transient characteristics of a boiler and turbine system for a steam power plant are simulated. One-dimensional unsteady models are introduced for each component. An interaction between boiler and turbine and a control of the water level in the drum are taken into account. Transient responses of the system to the variations of main system variables such as fuel and air flow rate, cooling water injection rate at the attemperator, gas recirculation rate at the furnace and opening of the turbine control valve are examined. Effect of fluid inertia and tube wall thermal inertia on predicted dynamic behavior is investigated.

• Advances in aircraft and spacecraft science
• /
• v.2 no.3
• /
• pp.263-273
• /
• 2015

Carbon nanotube strain sensors, or so called "fuzzy fiber" sensors have not yet been studied sufficiently. These sensors are composed of a bundle of fiberglass fibers coated with CNT through a thermal chemical vapor deposition process. The characteristics of these fuzzy fiber sensors differ from a conventional nanocomposite in that the CNTs are anchored to a substrate fiber and the CNTs have a preferential orientation due to this bonding to the substrate fiber. A numerical model was constructed to predict the strain response of a composite with embedded fuzzy fiber sensors in order to compare result with the experimental results obtained in an earlier study. A comparison of the numerical and experimental responses was conducted based on this work. The longitudinal sensor output from the model matches nearly perfectly with the experimental results. The transverse and off-axis tests follow the correct trends; however the magnitude of the output does not match well with the experimental data. An explanation of the disparity is proposed based on microstructural interactions between individual nanotubes within the sensor.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.12
• /
• pp.830-836
• /
• 2012

In this study, the effects of heating control methods on heating control performance and energy consumption in the floor radiant heating control system of residential apartments were research by computer simulation. A general regression neural network(GRNN) control method for reducing indoor temperature overshoot and saving energy in floor radiant heating system is suggested. The GRNN control method shows good responses in comparison with the conventional and outdoor reset control methods for improving indoor thermal environment and reducing energy consumption.

• Journal of the Korean Home Economics Association
• /
• v.39 no.5
• /
• pp.39-47
• /
• 2001

The purpose of this study was to investigate two different kinds of t-shirts on thermal responses at air temperature of $23{\pm}2^{\circ}C$, relative humidity of $70{\pm}5%$ and wind velocity not more than 0.5 m/sec. Five healthy men wearing boxy type t-shirts or fitted type t-shirts, participated as the subjects. Rectal temperature, skin temperatures, heart rate, clothing microclimate and subjective sensation were measured every 2 minute during experiment(rest, walking, recovery each 20 min.) and compared between two experimental garments(boxy type and fitted type t-shirts). Rectal temperature was lower in recovery phase at wearing fitted type t-shirts. Chest skin temperature was higher at wearing fitted type t-shirts and thigh and leg skin temperature were higher at wearing boxy type t-shirts.

• The Korean Journal of Physiology and Pharmacology
• /
• v.10 no.6
• /
• pp.323-327
• /
• 2006

Despite the wealth of data concerning the roles of ${\alpha}-CGRP$ in nociceptive behaviors, ${\alpha}-CGRP-null$ mice showed no obvious phenotypic differences in nociceptive behaviors from wild type. The present studies specifically demonstrate that ${\alpha}-CGRP$ null mice showed no CGRP immunoreactivity from the spinal cord, implying that CGRPs in the mice spinal cord are mainly a-isoforms. However, the nociceptive behaviors of the null mice are not significantly different from the wild type mice in thermal nociceptive behaviors on hotplate, chemical nociception tests to intraplantar capsaicin or formalin injection, and visceral pain behaviors to intraperitoneal acetic acid or magnesium sulfate injections. These data suggest that ${\alpha}-CGRP$ is dispensable for nociceptive behaviors or that compensatory mechanisms may exist to overcome the absence of this peptide.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.4
• /
• pp.272-289
• /
• 2004

The spatial resolution of local weather and climate information for agronomic practices exceeds the current weather service scale. To supplement the insufficient spatial resolution of official forecasts and observations, gridded climate data are frequently generated. Most ecological models can be run using gridded climate data to produce ecosystem responses at landscape scales. In this lecture, state of the art techniques derived from geospatial climatology, which can generate gridded climate data by spatially interpolating point observations at synoptic weather stations, will be introduced. Removal of the urban effects embedded in the interpolated surfaces of daily minimum temperature, incorporation of local geographic potential for cold air accumulation into the minimum temperature interpolation scheme, and solar irradiance correction for daytime hourly temperature estimation are presented. Some experiences obtained from their application to real landscapes will be described.

• Structural Engineering and Mechanics
• /
• v.34 no.1
• /
• pp.97-107
• /
• 2010

Nonlinear thermoelastic static response characteristics of laminated composite conical panels are studied employing finite element approach based on first-order shear deformation theory and field consistency principle. The nonlinear governing equations, considering moderately large deformation, are solved using Newton-Raphson iterative technique coupled with the adaptive displacement control method to efficiently trace the equilibrium path. The validation of the formulation for mechanical and thermal loading cases is carried out. The present results are found to be in good agreement with those available in the literature. The adaptive displacement control method is found to be capable of handling problems with multiple snapping responses. Detailed parametric study is carried out to highlight the influence of semicone angle, boundary conditions, radius-to-thickness ratio and lamination scheme on the nonlinear thremoelastic response of laminated cylindrical and conical panels.