• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.153-157
• /
• 2002

Thermal management is very important for the success of high density circuit design in LTCC. To realized more accurate thermal analysis for structure design, a series of simple thermal resistance measurement by laser flash method and parametric numerical analysis have been carried out. The design of via filled material would be useful in thermal management of power devices.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 추계학술대회 논문집
• /
• pp.125-126
• /
• 2013

ESS(Energy Storage System) for Improve the quality of the power grid, supply reliability, system stability and the efficient operation method of power is drawing attention. According to changes in the load of the power system frequency will be adjustable in real time in response to changes in the frequency of the grid, so thermal power output is mainly controlled in order to keep the grid frequency stable. ESS for adjusting the frequency of the grid when the frequency rises to grid and charge the energy storage device. If the frequency drops to discharge the battery power to the grid and the future is expected to replace the thermal power plant. This paper describes 4MW ESS for the frequency regulation and find out about the characteristics through the PSCAD/EMTDC.

• 비파괴검사학회지
• /
• 제28권6호
• /
• pp.469-476
• /
• 2008

Condition based maintenance(CBM) for the preventive diagnosis of important equipments related to safety or accident in power plant is essential by using the suitable methods based on actual power plant conditions. To improve the reliability and accuracy of the measured value at the minute leak situation, and also to monitor continuously internal leak condition of power plant valve, the development of a diagnosis and monitoring technique using multi-measuring method should be performed urgently. This study was conducted to estimate the feasibility of multi-measuring method using three different methods such as acoustic emission(AE) method, thermal image measurement and temperature difference$({\Delta}T)$ measurement that are applicable to internal leak diagnosis for the power plant valve. From the experimental results, it was suggested that the multi-measuring method could be an effective way to precisely diagnose and evaluate internal leak situation of valve.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.36-42
• /
• 2009

This paper presents a review of an improved high power-high frequency III-V wide bandgap (WBG) semiconductor device, Gallium Nitride (GaN). The device offers better efficiency and thermal management with higher switching frequency. By having higher blocking voltage, GaN can be used for high voltage applications. In addition, the weight and size of passive components on the printed circuit board can be reduced substantially when operating at high frequency. With proper management of thermal and gate drive design, the GaN power converter is expected to generate higher power density with lower stress compared to its counterparts, Silicon (Si) devices. The main contribution of this work is to provide additional information to young researchers in exploring new approaches based on the device's capability and characteristics in applications using the GaN power converter design.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권2호
• /
• pp.143-149
• /
• 2022

As ESS safety issues increase recently, there is a need to more precisely monitor the temperature of the ESS. In this paper, DTS technology for temperature monitoring of ESS batteries is introduced and the temperature measurement principle is explained. The temperature of the battery module is measured using the DTS system, and the thermal deviation between battery cells inside the battery module is analyzed. In order to analyze how thermal imbalance affects the charging and discharging performance of the battery, an accelerated degradation test was conducted. Cycle life characteristics analysis, battery surface temperature change, and AC impedance characteristics were conducted to analyze how the performance of battery cells differs according to temperature conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.82-84
• /
• 2008

This paper presents the modeling and power quality analysis of Jeju island power system connected with wind farm, and thermal power plant. It is for indicating the influence of wind farm operation in steady and transient state in Jeju island power system during the HVDC system overhaul period. For the computer simulation, three kinds of main item are modeled, which are 67[MW] wind farm, thermal power plant and Jeju power load. To analyze the influence of the wind power generation to the Jeju power system, two kinds of simulations are carried out by using the PSCAD/EMTDC program. One is the steady state operation under the variable speed wind, and the other is the transient state operation when all of wind farms in Jeju island are disconnected from the Jeju power grid instantaneously on the rated power output. With the comparison of these results, it is useful for analyzing the power quality of Jeju power system versus wind power generation.

• 한국컴퓨터정보학회논문지
• /
• 제16권9호
• /
• pp.1-10
• /
• 2011

동작 주파수의 증가는 싱글코어 프로세서의 성능을 크게 향상시키는 반면 전력 소모 증가와 높은 온도로 인한 신뢰성 저하 문제를 유발하고 있다. 최근에는 싱글코어 프로세서의 한계점을 극복하기 위한 대안으로 멀티코어 프로세서가 주로 사용되고 있다. 하지만, 멀티코어 프로세서를 2차원 구조로 설계하는 경우에는 내부 연결망에서의 전송 지연 현상으로 인해 프로세서의 성능 향상이 제약을 받고 있다. 내부 연결망에서의 전송 지연을 줄이기 위한 방안으로 멀티코어 프로세서를 3차원 구조로 설계하는 연구가 최근 큰 주목을 받고 있다. 2차원 구조 멀티코어 프로세서와 비교하여 3차원 구조 멀티코어 프로세서는 성능 향상과 전력 소모 감소의 장점을 지닌 반면, 높은 전력 밀도로 인해 발생된 발열 문제가 프로세서의 신뢰성을 위협하는 문제가 되고 있다. 3차원 멀티코어 프로세서에서 발생되는 발열 문제에 대한 상세한 분석이 제공된다면, 프로세서의 신뢰성을 확보하기 위한 연구 진행에 큰 도움이 될 것으로 기대된다. 그러므로 본 논문에서는 3차원 멀티코어 프로세서의 온도에 밀접하게 연관된 요소인 작업량, 방열판과의 거리, 그리고 적층되는 다이의 개수와 온도 사이의 관계를 자세히 살펴보고 높은 온도가 프로세서의 성능에 미치는 영향 또한 분석하고자 한다. 특히, 2차원 구조 멀티코어 프로세서와 3차원 구조 멀티코어 프로세서에서의 온도 문제를 함께 분석함으로써, 온도 측면에서 효율적인 프로세서 설계를 위한 가이드라인을 제시하고자 한다.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1377-1384
• /
• 2003

An analysis has been performed for active thermal control of the KOMPSAT monopropellant rocket engine assembly, i.e., dual thruster module(DTM). The main efforts of this work have been directed at determining proper heater sizes for propellant valves and catalyst beds necessary to maintain their temperatures within specified temperature ranges under KOMPSAT environment and operational conditions. The TAS incorporated with TRASYS thermal radiation analyzer was used to establish a complete heat transfer model which allows to predict the DTM temperature as a function of time. The thermal analysis has been performed in transient mode to verify the appropriate power for catalyst bed heaters necessary to increase catalyst bed temperature to the required value within a specified period of time. Similar analysis has been executed to validate the heater power for the thermostatically controlled primary and redundant heater circuits used to prevent hydrazine freezing, i.e., single fault. Moreover the effect of the radiative property of thermal control coating of heat shield was examined. Thruster firing condition was also simulated for the heat soakback condition. As a consequence, all thermal analysis results for DTM satisfactorily met the thermal requirements for the KOMPSAT DTM under the worst case average voltage, i.e. 25 volt.

• 동력기계공학회지
• /
• 제2권3호
• /
• pp.41-48
• /
• 1998

This study was aimed at development of fabrication process of functionally graded materials(FGM), consisting of metal and ceramic by thermal spraying method. NiCrAIY/$Al_2O_3$ FGM were made by using plasma spraying onto the SS400 carbon steel substrate. And mechanical properties such as microhardness, thermal shock resistance and adhesive strength of the coating layer were investigated. Adhesive strength was evaluated by acoustic emission method. It was resulted that NiCrAIY/$Al_2O_3$ FGM made by thermal spraying method showed excellent thermal shock resistance and adhesive strength compared to the other lamellar structures of sprayed coatings and that AE is useful tool to evaluate the defect of thermal sprayed coating layer.

• 설비공학논문집
• /
• 제20권7호
• /
• pp.478-485
• /
• 2008

The extreme steam temperature deviation experienced in the superheater of a tangentially fired boiler can seriously affect its economic and safe operation. This temperature deviation is one of the main causes of boiler tube failures. The steam temperature deviation is mainly due to the thermal load deviation in the lateral direction of the superheater. The thermal load deviation consists of several causes. One of the causes is the non-uniform heat flow distribution of burnt gas on the superheater tube system. This distribution is very difficult to measure in situ using direct experimental techniques. So, we need thermal load model to estimate the tube temperature. In this paper, we propose a thermal load distribution model by using CFD analysis and plant data. We successfully predict the tube temperature and the steam flow rate in a final superheater system from the thermal load model and one dimensional heat-flow system analysis. The proposed model and analysis method would be valuable in preventing the frequent tube failure of the final superheater tubes.