• Elastomers and Composites
• /
• 제40권4호
• /
• pp.284-289
• /
• 2005

레졸로 가교된 NR 복합체의 열노화에 의한 가교밀도변화를 연구하였다. 노화 온도는 $50-90^{\circ}C$였다. 가교밀도 변화는 노화 온도가 올라감에 따라 증가하다 감소하였다. 가교밀도 변화 정도는 레졸 함량이 증가함에 따라 감소하였다. 열노화에 의한 가교밀도의 증가는 레졸로 마감된 매달린 작용기들의 결합 반응과 메틸올이나 메틸렌 퀴논 중간체를 갖는 매달린 작용기의 가교 반응으로 설명하였다. 그리고 열노화에 의한 가교밀도의 감소는 디메틸렌 에테르 연결을 갖는 기존 레졸 가교의 분해로 설명하였다.

• 한국전기전자재료학회논문지
• /
• 제15권2호
• /
• pp.119-126
• /
• 2002

The mica/epoxy composite used in generator(rated 22 kV and 500 MW) stator windings was aged at 180$\^{C}$ for up to 1000 hours in air and hydrogen. The degradation mechanism was investigated through the defect of evolution and microstructural analysis by performing SEM(Scanning Electron Microscope). As the thermal aging time increases, the number of voids per unit volume increases at the mica/epoxy interface of generator stator windings. The aged specimens in hydrogen showed retarded generation and growth of voids. Accelerated aging tests were conducted using the combination of thermal and electrical aging in air and hydrogen. The aging was carried out at a combined stress such as thermal aging at 110$\^{C}$, electrical aging at 5.5 kV/mm and frequencies 420 Hz in air, and electrical aging at 5.5 kV/mm and frequencies 420 Hz in hydrogen (pressure 4 kg/㎠). Thermal and electrical aging generates large voids at the mica/epoxy interface in air. Electrical aging in hydrogen also generates small voids, delaminations and cracks in mica tapes.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1832-1838
• /
• 2010

Aging of transformer insulating material in natural ester insulating oil is compared to that in conventional transformer oil. Aging of insulating paper and insulating oil have been studied by performing accelerated thermal aging test. Sealed aging test vessels containing cooper, laminated core, Kraft paper and insulating oil(natural oil or mineral oil) were aged at $140^{\circ}C$ for 500, 1000, 1500 and 2000 hours. Insulating oils after aging are investigated with total acid number, breakdown voltage and viscosity. Also, degradation of insulating paper after aging is determined using breakdown voltage and mechanical strength. Accelerated aging studies demonstrate a slower aging rate for natural ester insulating oil compared to the rate for conventional mineral oil.

• The Journal of Advanced Prosthodontics
• /
• 제16권1호
• /
• pp.48-56
• /
• 2024

PURPOSE. To evaluate the metameric disparities among monolithic zirconia materials with differing yttrium compositions across various lighting conditions. MATERIALS AND METHODS. Thirty-six square-shaped zirconia samples measuring 10 × 10 × 0.5 mm were prepared from monolithic zirconia materials with three different yttrium contents. A 0.2 mm thick layer of polymerized dual-polymerizable self-adhesive resin cement was created using a silicone mold with the same dimensions as the prepared zirconia specimens. To evaluate metamerism, color measurements were conducted using a spectrophotometer device on a neutral gray background in a color measurement cabinet that offers four different illumination environments. All samples underwent aging by subjecting them to 10000 thermal cycles using a thermal cycle tester. Following thermal aging, color measurements were taken once more, and the data were recorded using the CIE L^*, a^*, b^* color system. Two-way ANOVA and Post-hoc Bonferroni tests were employed to analyze the data. RESULTS. It was observed that there was no statistical difference among the color measurements made in different illumination environments of the monolithic zirconia ceramics used to evaluate metamerism (P > .05). This observation remained consistent both before and after thermal aging. After thermal aging, the color of monolithic zirconia materials exhibited a tendency towards red and yellow hues, accompanied by a decrease in brightness levels. CONCLUSION. It can be stated that different illumination conditions did not affect the metamerism of monolithic zirconia materials, but there was a color change in monolithic zirconia materials after a thermal aging period equivalent to one year.

• 설비공학논문집
• /
• 제25권11호
• /
• pp.617-623
• /
• 2013

This study is to draw thermal property data during long-term aging, by testing the thermal conductivity of building insulation materials in Korea. The thermal resistance of extruded insulation within 3 days from manufacture performed well over the KS Standard. After 50 to 110 days, however, the thermal performance had deteriorated to the level of the KS standard. Eventually, after 4,000 days, the insulation performance had deteriorated to about 25.4~41.8% of the initial performance. Therefore, this research will be utilized as a reference for thermal properties during long-term aging, in order to improve standards and regulations related to building insulation materials.

• Elastomers and Composites
• /
• 제40권3호
• /
• pp.181-187
• /
• 2005

가교 시스템이 다른 NR 가황물의 열노화에 의한 물성 변화를 연구하였다. 두 가지 황가교 시스템과 한 가지 레졸 가교 시스템을 도입하였으며, 가교제 함량을 변화시켰다. 황 가교시스템으로 만든 NR 가황물의 경우, $90^{\circ}C$에서 3일간 노화 후 경도와 모듈러스는 증가한 반면 신율과 인장강도는 감소하였다. 레졸 가교 시스템으로 만든 NR 가황물의 경우에는 노화 후 전반적으로 물성이 하락하였다. 열노화에 의한 물성 변화를 가교밀도의 변화로 설명하였다. 노화 후, 황 가교 시스템으로 만든 NR 가황물의 가교밀도는 증가한 반면, 레졸 가교 시스템으로 만든 NR 가황물의 가교밀도는 감소하였다. 노화방지제의 이동이 물성에 미치는 영향에 대해서도 조사하였다. 그러나 노화방지제의 이동으로는 노화에 의한 물성의 변화를 충분히 설명할 수 없었다.

• Elastomers and Composites
• /
• 제41권1호
• /
• pp.19-26
• /
• 2006

본 연구에서는 열화 온도가 아민 (D-230), 아마이드 (G-5022), 그리고 산무수물 (HN-2200)에 의해 경화된 에폭시 접착제의 질량변화, 유리전이온도 및 모폴로지에 미치는 영향을 고찰하였다. 실험 결과, 3가지 접착제 시편의 질량감소는 열화 온도가 증가함에 따라 증가하였다. 이는 열화 온도가 증가함에 따라 시편의 표면에서 더 많은 열화가 발생하여 시편의 질량이 감소한 것으로 판단된다. DSC 분석결과에 따르면 DGEBA/D-230과 DGEBA/G-5022 시편의 유리전이온도는 열화 온도에 따라 증가하였으며, DGEBA/HN-2200 시편의 유리전이온도는 열화온도 $150^{\circ}C$, 열화 시간 7일 이상에서 일정한 값을 나타내었다. SEM 결과에서 열화 이후의 DGEBA/G-5022 시편의 표면은 DGEBA/D-230 또는 DGEBA/HN-2200 시편보다 거친 모폴로지를 나타내었다. 이 결과는 시편의 질량 변화에서 얻은 결과와 일치하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1447-1448
• /
• 2011

The CSPE cables are used for three years in nuclear power plant. The accelerated thermal aging of chloro sulfonate polyethylene(CSPE) jacket of test cables were carried out for the period equal to 10, 20 and 30 years in air at 90 and $100^{\circ}C$, respectively. The electrical volume resistivity, density, XPS, FE-SEM, EDS and XRF of the accelerated thermal aging of CSPE were measured. The validation of condition monitering method of accelerated thermal aging CSPE was estimated by them. The best validation of condition monitoring method of accelerated aging CSPE is electrical volume resistivity because change thermal of the specimen showed distinction.

• Earthquakes and Structures
• /
• 제6권2호
• /
• pp.127-140
• /
• 2014

Laminated rubber bearing is very popular base isolation of earthquake engineering pertaining to the passive structural vibration control technologies. Rubber used in fabricating NRB and LRB can be easily attacked by various environmental factors such as oxygen, heat, light, dynamic strain, and organic liquids. Among these factors, this study carried out thermal aging test to investigate the effect of thermal aging on the mechanical properties of laminated rubber bearings in accelerated exposure condition of $70^{\circ}C$ temperature for 168 hours. The compressive-shear test was carried out to identify the variation of compressive and shear properties of the rubber bearings before and after thermal aging. In contrast to tensile strength and elongation tests, the hardness of rubber materials showed the increasing tendency dependent on exposure temperature and period. Based on the test results, the property changes of rubber bearing mainly aged by heat are quantitatively presented.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1909-1923
• /
• 2021

We experimentally investigated the effects of thermal aging and cold work on the microstructure, mechanical properties, and primary water stress corrosion cracking (PWSCC) initiation time for Alloy 182 welds. The effects of thermal aging and cold work on the PWSCC initiation time of Alloy 182 were modeled based on the plastic energy concept and the PWSCC initiation data of this study and previous reports by considering censored data. Based on the results, it is estimated that the PWSCC resistance of the Alloy 182 weld firstly increases and then decreases with thermal aging time when the applied stress is kept constant.