• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2999-3005
• /
• 2022

The new experimental setup has been built at the 11b channel of the IBR-2 research reactor at FLNP, JINR, to study the elemental composition of samples by registration of prompt gamma emission during thermal neutron capture. The setup consists of a curved mirror neutron guide and a radiation-resistant HPGe high-purity germanium detector. The detector is surrounded by lead shielding to suppress the natural background gamma level. The sample is placed in a vacuum channel and surrounded by a LiF shield to suppress the gamma background generated by scattered neutrons. This work presents characteristics of the experimental setup. An example of hydrogen concentration determining in a diamond powder made by detonation synthesis is given and on its basis, the sensitivity of the setup is calculated being ~4 ㎍.

• Composites Research
• /
• v.35 no.1
• /
• pp.1-7
• /
• 2022

The activated carbon is a very good choice for using as supercapacitor electrode materials. Herein, the flower of Shorea robusta, a bio-waste material was successfully used to synthesize the activated carbons for application as supercapacitor electrode materials. The activated carbon was synthesized through chemical activation process followed by thermal treatment at 700℃ in presence of N₂ atmosphere using KOH, ZnCl₂ and H₃PO₄ as the activating agents. The physicochemical analyses demonstrate that the obtained activated carbons are graphitic in nature and the degree of disorder of the graphitic carbons is changed with the activating agents. The activated carbon obtained from Shorea robusta flower (ACSF-K) electrode shows the specific capacitance of ~610 F g^-1 at 2 A g^-1 current density, which is higher than ACSF-Z (560 F g^-1) and ACSF-H (470 F g^-1) electrode material under the identical current density. The synthesized graphitic carbons also demonstrated good rate capability and high electrochemical stability as supercapacitor electrode.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.1
• /
• pp.28-37
• /
• 2022

In this study, we synthesized a poly(pheneylene oxide) (PPO)-based organic/inorganic composite membrane having silicotungstic acid (STA) for the development of an anion exchange membrane with excellent ionic conductivity and physicochemical stability. The organic/inorganic composite membranes were prepared by introducing different STA contents (0 wt%, 10 wt%, 30 wt%, and 50 wt%) into the quaternizaed(Q)-PPO matrix. The prepared anion exchange membranes were subjected to structural analysis by proton neclear magnetic resonance and Fourier transform infrared, and thermal behavior of membranes was confirmed by thermogravimetric analysis. Among the prepared composite membranes, the ion conductivity of Q-PPO/STA-50 (40.5 mS cm^-1) showed 1.46 times compared to that of the pristine membrane (27.6 mS cm^-1). Therefore, these results demonstrated that organic/inorganic composite membranes are promising candidates for application of anion exchange membranes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.10
• /
• pp.14-22
• /
• 2010

The source/channel/drain regions are formed by ion implantation with different dopant types of $n^+/p^{(+)}/n^+$ in the fabrication of the conventional n-type metal-oxide-semiconductor field effect transistor(NMOSFET). In implementing the ultra-small devices with channel length of sub-30 nm, in order to achieve the designed effective channel length accurately, low thermal budget should be considered in the fabrication processes for minimizing the lateral diffusion of dopants although the implanted ions should be activated as completely as possible for higher on-current level. Junctionless (JL) MOSFETs fully capable of the the conventional NMOSFET operations without p-type channel for enlarging the process margin are under researches. In this paper, the optimum design of the JL MOSFET based on silicon nanowire (SNW) structure is carried out by 3-D device simulation and the basic radio frequency (RF) characteristics such as conductance, maximum oscillation frequency($f_{max}$), current gain cut-off frequency($f_T$) for the optimized device. The channel length was 30 run and the design variables were the channel doping concentration and SNW radius. For the optimally designed JL SNW NMOSFET, $f_T$ and $f_{max}$ high as 367.5 GHz and 602.5 GHz could be obtained, respectively, at the operating bias condition $V_{GS}$ = $V_{DS}$ = 1.0 V).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.95-102
• /
• 2012

The serious issue of tall building is to ensure the fire resistance of high strength concrete. Therefore, Solving methods are required to control the explosive spalling. The fire resistant finishing method is installed by applying a fire resistant material as a light-weight material to structural steel and concrete surface. This method can reduce the temperature increase of the reinforcement embedded in structural steel and concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of light-weight fire protection material compounds including the inorganic admixture such as fly ash, meta-kaolin and light-weight aggregate as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. Also, this paper is concerned with change in microstructure and dehydration of the light-weight fire protection materials at high temperatures. The testing methods of fire protection materials in high temperature properties are make use of SEM and XRD. The study results show that the light-weight fire resistant finishing material composed of fly ash, meta-kaolin and light-weight aggregate has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Developed light-weight fire protection materials showed good stability in high Temperatures. Thus, the results indicate that it is possible to fireproof panels, fire protection of materials.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.329-337
• /
• 2001

It has been known that the leakage current in the low field region consists of the dielectric relaxation current and intrinsic leakage current, which cause the charge loss in dynamic random access memory (DRAM) storage capacitor using (Ba,Sr)TiO$_{3}$ (BST) thin film. Especially, the dielectric relaxation current should be seriously considered since its magnitude is much larger than that of the intrinsic leakage current in giga-bit DRAM operation voltage (~IY). In this study, thermally stimulated current (TSC) measurement was at first applied to investigate the activation energy of traps and relative evaluation of the density of traps according to process change. And, through comparing TSC to early methods of I-V or I-t measurement and analyzing, we identify the origin of the dielectric relaxation current and investigate the reliability of TSC measurement. First, the polarization condition such as electric field, time, temperature and heating rate was investigated for reliable TSC measurement. From the TSC measurement, the energy level of traps in the BST thin film has been investigated and evaluated to be 0.20($\pm$0.01) eV and 0.45($\pm$0.02) eV. Based on the TSC measurement results before and after rapid thermal annealing (RTA) process, oxygen vacancy is concluded to be the origin of the traps. TSC characteristics with thermal annealing in the MIM BST capacitor have shown the same trends with the current-voltage (I-V) and current-time (I-t) characteristics. This means that the TSC measurement is one of the effective methods to characterize the traps in the BST thin film.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.1
• /
• pp.93-98
• /
• 2005

Total tocopherol and phenol contents were determined for virgin and pure oilve oil, and their autoxidation and thermal oxidation were compared with those of commercial soybean oil, in the presence or absence of fluorescent light. The total tocopherol contents of virgin, pure olive oil, and soybean oil were 15.7, 11.2, and 80.7 mg/100 g, respectively. Their total phenol contents were 10.4, 1.6 and 0.5 mg/l00 g, respectively. In autoxidation under dark place at 45$^{\circ}C$, the oxidative stability of the substrate oils decreased in order of virgin oilve oil, pure olive oil, and soybean oil. The average temperature coefficients of the virgin, pure olive oil and soybean oil in the range of 45∼$65^{\circ}C$ were 1.73, 1.83 and 1.64, and the activation energies were 26.86, 29.49, and 24.07 KJ/mol, respectively. In temperature range of 45∼$65^{\circ}C$, pure olive oil was the most susceptible to temperature change, whereas soybean oil the least. In autoxidation under fluorescent light at 45$^{\circ}C$, the oxidative stability of substrate oils decreased in the order of soybean oil, pure olive oil, and virgin olive oil. In thermal oxidation at 18$0^{\circ}C$, the oxidative stability of substrate oils decreased in order of pure olive oil, virgin olive oil, and soybean oil.

• Korean Journal of Food Science and Technology
• /
• v.24 no.3
• /
• pp.232-235
• /
• 1992

Effect of temperature and initial pH were studied on the pH change of MSG solution during heating. The heating temperature and initial pH of 2% MSG solution were in the range of $100{\sim}120^{\circ}C$ and $pH\;2{\sim}9$, respectively. The results showed that the pH of MSG solution was more rapidly decreased as the temperature increased and the initial pH decreased due to pyroglutamic acid formation from MSG thermal degradation. A linear relationship was obtained between pH decreased and logarithmic value of heating time and the decreasing rate constant of pH were calculated from the slope. The pH decreased$({\Delta}pH)$ after 3 hrs of heating was 1.2 at the initial pH 4 and $120^{\circ}C$ and 0.33 at pH 5 and $120^{\circ}C$ while little pH change measured at the range of $pH\;6{\sim}9$. Activation energy calculated for pH decrease during heating was 11.77 and 22.26 kcal/mole at pH 4 and pH 5, respectively.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.3
• /
• pp.263-270
• /
• 2009

Carbon felt surface was modified by heat or acid treatment in order to use for the electrode of a redox-flow battery. Polymers on the surface of carbon felt was removed and oxygen-containing functional group was attached after the thermal treatment of carbon felt. Thermal treatment was better for the stability of the carbon structure than the acid treatment. Oxygen-containing functional group on the thermally treated carbon felt at 500$^{\circ}C$ was confirmed by XPS and elementary analysis. BET surface area was increased from nearly zero to 96 $m^2/g$. Thermally treated carbon felt at 500$^{\circ}C$ showed lower activation polarization than the thermally treated carbon felt at 400$^{\circ}C$ and the acid-treated carbon felt in the cyclicvoltammetry and polarization experiments. The thermally treated carbon felts at 400$^{\circ}C$ and 500$^{\circ}C$ and the acid-treated carbon felt was applied for the electrode to prepare vanadium redox flow battery. Voltage efficiencies of charge/discharge were 86.6%, 89.6%, and 96.9% for the thermally treated carbon felts at 400$^{\circ}C$ and 500$^{\circ}C$ and the acid-treated carbon felt, respectively.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.1013-1016
• /
• 1995

The color stability of betacyanins and effects of antioxidants from Opuntia dillenii Haw were determined in the fruit juice at temperature up to $90^{\circ}C$. The absorption maxima of betacyanins occurred between 536 nm and 538 nm. When fruit juice was heated at $90^{\circ}C$ for various times, the red color gradually diminished and the absorption maxima slightly shifted toward uv region. The kinetic analysis of the data obtained indicated that the discoloration for betacyanins obeyed first order reaction pattern, when the thermal stability test was performed at $50{\sim}90^{\circ}C$. And the rate constant increased from $1.56{\times}10^{-3}/min\;to\;71.91{\times}10^{-3}/min$ with the half-life decreasing from 444.23 min to 9.64 min. The results also indicated that the thermal stability of pigment decreased with increasing temperature. The energy of activation was 10.94 kcal/mole for the pigment. N-propyl gallate, L-cysteine, and ascorbic acid were added to cactus fruit juice at concentrations of $0.01{\sim}0.3%$ at different temperatures. Npropyl gallate and L-cysteine had a little antioxidant effect on betacyanins stability at $50^{\circ}C\;and\;70^{\circ}C$, whereas ascorbic acid had a great antioxidant effect with the half-life value of 2 to 10 times to that of the control.