• Journal of the Korean Ceramic Society
• /
• v.28 no.9
• /
• pp.730-738
• /
• 1991

Machinable ceramics containing ${\beta}$-spodumene crystal was fabricated by melting method using domestic pyrophyllite. Raw materials were batched by molar ratio of 8:2, 7:3, 6:4, and 5:5 for fluorophlogopite and ${\beta}$-spodumene. These compounds were melted at 1450$^{\circ}C$ for 1 hr and formed in graphite mold. Base glasses were heat-treated according to 2-step schedule which was determined from DTA, XRD analysis and SEM observation. Fabricated machinable ceramics have excellent themal, chemical properties and machinability.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.11a
• /
• pp.83-87
• /
• 1999

The fabrication process and thermal properties of 50~71vol% SiCp/Al metal matrix composites (MMCs) were investigated. The 50~71vol% SiCp/Al MMCs fabricated by pressure infiltration casting process showed that thermal conductivities were 118~170W/mK and coefficient of thermal expansion (CTE) were 9.5~$6.5{\times}10^{-6}/K$. Specially, the thermal conductivity and CTE of 71vol%SiCp/Al MMCs were 115~156W/mK and 6~$7{\times}10^{-6}/K$. respectively, which showed a improved themal properties than the conventional electronic packaging materials such as ceramics and metals.

• Journal of the Korean Chemical Society
• /
• v.47 no.3
• /
• pp.199-205
• /
• 2003

Complexes of uranyl ion $UO^{+2}_2$with Schiff-bases obtained by condensing glycylglycine with salicylaldehyde; 2-hydroxy-1-naphthaldehyde, 2,3-dihydroxybenzaldehyde, and 2,4-dihydroxybenzaldehyde have been synthesized and characterized through elemental analysis, conductivity measurements, magnetic susceptibility determinations, u.v., i.r. and $^1H$ nmr spectra as well as d.t.a., t.g. and d.s.c. techniques. Structures and mechanisms of thermal decomposition are proposed.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1217-1219
• /
• 1995

The organization of phospholipid monolayers on a water surface was investigated by means of Maxwell-Displacement-Current(MDC)-Measuring technique. The phase transition from the gaseous phase to the gaseous-fluid phase which accompanies the polar ordering of lipid molecules was detected by the technique in the range of immeasurable low surface pressure and the molcular-area which gives the onset of the transition was determined for lipid monolayers. The vertical component of dipole moment of lipid membranes was determined from the charge flowing the rough the circuit, and we measured differential themal analysis of sample.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.126-126
• /
• 2012

In past decades, the themal inkjet (TIJ) printer has been widely used as one of the most well-known digital printing technology due to its low cost, and high printing quality. Since the printing speed of TIJ printers are much slower than that of laser printers, however, there has been intensive efforts to raise the printing speed of TIJ printers. One of the most plausible methods to raise the printing speed of TIJ printers is to adopt a page-wide array TIJ printhead. To accomplish this goal, the high efficiency inkjet heating resistor films should be developed to settle the high power consumption problem of a page-wide array TIJ printhead. In this study, we investigated noble metal based multicomponent thin film resistor films prepared by atomic layer deposition (ALD) for a high efficiency inkjet printhead. Design concept, preparation, material properties of noble metal based multicomponent thin films will be discussed in terms of mutlfunctionality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.411-414
• /
• 1999

70 ${\AA}$-thick oxides nitridied at various conditions were reoxidized at pemperatures of 900$^{\circ}C$ in dry-O$_2$ ambients for 5～40 mininutes. The gate oxide interface porperties as well as the oxide substrate interface properties of MOS(Metal Oxide Semiconductor) capacitors with various nitridation conditions, reoxidation conditions and pure oxidation condition were investigated. We stuided I$\sub$g/-V$\sub$g/ characteristics, $\Delta$V$\sub$g/ shift under constant current stress from electrical characteristics point of view and breakdown voltage from leakage current point of view of MOS capacitors with SiO$_2$, NO, RNO dielectrics. Overall, our experimental results show that reoxidized nitrided oxides show inproved charge trapping porperites, I$\sub$g/-V$\sub$g/ characteristics and gate $\Delta$V$\sub$g/ shift. It has also been shown that reoxidized nitridied oxide's leakage currented voltage is better than pure oxide's or nitrided oxide's from leakage current(1${\mu}$A) point of view.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.999-1004
• /
• 2001

(1-Chloro-2,2-dicyanovinyl)benzene or 1,4-bis(1-chloro-2,2-dicyanovinyl)benzene was reacted with 2-amino-phenol to give the model compound, hydroxy enaminonitrile, which was found to undergo thermal cyclization reaction to form the corresponding benzoxazole. This intramolecular cyclization reaction is expected to occur through nucleophilic attack to electropositive enamine carbon by ortho-hydroxy group on the phenyl ring, which is accompanied by the release of neutral malononitrile through rearrangement. From each bifunctional monomer, o-hydroxy substituted polyenaminonitrile was prepared and characterized as a new precursor polymer for well-known aromatic polybenzoxazole. Also the unusual macrocyclic dimer formation from the 1,4-bis(1-chloro-2,2-dicyanovinyl)benzene and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane polymerization reaction system was discussed. The thermal cyclization reactions and the properties of polymers were investigated using FT-IR and thermal analysis (DSC & TGA).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.644-653
• /
• 2019

With the development of themal observatory device(TOD), thermal camouflage system has been applied not only to the weapon system but also to the combat suit for soldiers. In this paper, the characteristic of thermal radiation of human body depending on the clothing material properties was analyzed through numerical simulations. The bioheat equation with thermoregulatory model was solved to obtain the realistic surface temperature of human body and these results are combined with the emissivity of human skin and clothing in order to calculate the thermal signature from the human body. According to each thermal resistance of clothing, the optimal background radiance which makes contrast radiance intensity(CRI) be lowest is different. Also, the average CRI variation per thermal resistance change is about twice as much as the case of evaporative resistance change.

• Polymer(Korea)
• /
• v.25 no.2
• /
• pp.168-176
• /
• 2001

The effect of novel N-crotyl-N,N-dimethyl-4-methylanilinium hexafluoroantimonate (CMH) curing agent as a thermal latent initiator on thermal behaviors, rheological properties, and thermal stability of diglycidylether of bisphenol A (DGEBA) epoxy cationic system was investigated. From DSC measurements of DGEBA/CMH system, it was shown that this system exhibits an excellent thermal latent characteristic at a given temperature. The conversion and conversion rate of DGEBA/CMH system increased with increasing the concentration of initiator, due to high activity of CMH. Rheological properties of the system were investigated under isothermal condition using a rheometer The gelation time was obtained from the analysis of storage modulus (G'), loss modulus (G"), and damping factor (tan $\delta$). As a result, the reduction of gelation time was affected by high curing temperature and concentration of CMH, resulting in high degree of network formation in cationic polymerization, due to difference of activity. The thermal stability of the cured epoxy resin was discussed in terms of the activation energy for decomposition and thermal factors determined from TGA measurements.ents.

• Journal of the Korean Vacuum Society
• /
• v.13 no.2
• /
• pp.72-78
• /
• 2004

Cu seed layers deposited by magnetron sputtering onto tantalum nitride barrier films were treated with ECR plasma and then the copper films were electroplated and rapid thermal annealed in an argon or nitrogen atmosphere at various temperatures ranging from 200 to $500^{\circ}C$. Changes in the microstructure and physical properties of the copper films electroplated on the hydrogen ECR plasma cleaned copper seed layers were investigated using X-ray diffraction (XRD), electron back-scattered diffraction (EBSD), and atomic force microscopy (AFM) analyses. It was found that the copper film undergoes complete recrystallization during annealing at a temperature higher than $400^{\circ}C$. The resistivity of the Cu film tends to decrease and the degree of (111) preferred orientation tends to increase as the annealing temperature increases. Theoptimum annealing condition for obtaining the film with the lowest resistivity, the smoothest surface and the highest degree of the (111) preferred orientation is rapid thermal annealing in a nitrogen atmosphere at $400^{\circ}C$ for 120 s. The resistivity and the surface roughness of the electroplated copper film annealed under this condition are 1.98 $\mu$O-cm and 17.77 nm, respectively.