• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.4
• /
• pp.280-286
• /
• 2021

The objective of this study was to prove the effect of pig slurry application with charcoal on nitrogen use efficiency (NUE), feed value and ammonia (NH₃) emission from maize forage. The four treatments were applied: 1) non-pig slurry (only water as a control), 2) only pig slurry application (PS), 3) pig slurry application with large particle charcoal (LC), 4) pig slurry application with small particle charcoal (SC). The pig slurry was applied at a rate of 150 kg N ha^-1, and the charcoal was applied at a rate of 300 kg ha-1 regardless of the size. To determine the feed value of maize, crude protein, dry matter intake, digestible dry matter, total digestible nutrient, and relative feed value were investigated. All feed value was increased by charcoal treatment compared to water and PS treatment. Also, the NUE for plant N was significantly higher in charcoal treatments (LC and SC) compared to PS treatment. On the other hand, there is no significant difference for feed value and NUE between LC and SC. The NH₃ emission was significantly reduced 15.2% and 27.9% by LC and SC, respectively, compared to PS. Especially, SC significantly decreased NH₃ emission by 15% compared to LC. The present study clearly showed that charcoal application exhibited positive potential in nitrogen use efficiency, feed value and reducing N losses through NH₃ emission.

• Journal of Korean society of Dental Hygiene
• /
• v.1 no.2
• /
• pp.171-180
• /
• 2001

The purpose of this study was to compared with the properties of commercial polyvinyl siloxane impression materials on the Korean product and the other country one. The materials used in this study were 5 hydrophilic polvinyly siloxane impression materials of light body automixing type (Perfect-F, Handae Chemical, Korea; Examix, GC, Japan; Contrast, VOCO, Germany; Express, 3M, U.S.A; Extrude, Kerr, U.S.A.). Specimens of each impression material were fabricated from a mold with dimensions identical to that specified in ASTM D624-91 and were subjected to tensile lode at 500 mm/min until failure for tear strength. Properties of consistency, strain in compression, recovery from deformation, detail reproduction and linear dimensional change were tested according to the testing methods of the ISO specification no.4823(1992). From this study, the follow ing results were obtained 1. The tear strength values were high ET(3.4kN/m), EP(3.4kN/m), PF(3.0kN/m), CT(3.0kN/m), but the lowest was EM(2.2kN/m)(p<0.05). 2. In the consistency, CT(47 mm) had the highest value, followed by PF(42.1 mm), ET(41.2 mm), and EM(39.6 mm), EP(39.2 mm)(p<0.05). It means more flow that the consistency value is high. 3. The strain in compression values were high followed by EM(5.8%), PF(52%), CT(4.6%), ET(4.1%), EP(2.9%)(p<0.05). 4. In the recovery from deformation, ET(99.95%) and PF(99.90%) had the highest value, followed by EP(99.75%), EM(99.74%) without statistical signification, CT(99.64%) had the lowest value(p<0.05). 5. Detail reproduction reappeared to line $20{\mu}m$ all products. 6. The linear dimensional change was a little shrinked all products. and there were not statistical signification (p>0.05). All products were satisfied the ISO specification.

• The Korean Journal of Community Living Science
• /
• v.27 no.3
• /
• pp.509-520
• /
• 2016

This study was carried out to investigate the effects of adding rosemary extract powder (REP) to pork teokgalbi on its quality and storage characteristics. Five types of teokgalbi were tested, viz. with no REP added (normal, N), with 0.05% ascorbic acid added (control, C) and with 0.05% (R1), 0.1% (R2) and 0.2% (R3) of REP added. The proximate composition, calorific value, water holding capacity and cooking loss were not significantly different among the different types of pork teokgalbi. The L and a values of the teokgalbi containing REP were significantly lower than those of the N and C groups. As regards the textural characteristics, the addition of 0.2% REP increased the springiness value. In the sensory evaluation, the teokgalbi with the addition of 0.1% REP had higher scores in flavor and total acceptability. The 2-thiobarbituric acid (TBA) value, total microbial count and volatile basic nitrogen content of the teokgalbi containing 0.2% REP were lower than those of the N group. In conclusion, R3 was significantly more effective in delaying lipid peroxidation than the other treatment groups. Therefore, rosemary extract could be used as a natural antioxidant in meat products.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.12 no.1
• /
• pp.1854-1860
• /
• 1970

Results of this study on the influence of percent passing of No. 200 sieve on soil compaction are as follows; 1. The higher maximum dry density of soil is, the lower optimum moisture content is. Maximum dry density is highest value and optimum moisture content is the lowest value in twocases that percents of No. 200 sieve are 30% in soils of which percents retained on No. 10 sieve are 5% and 10% respectively. 2. Maximum dry density increases according as uniformity coefficient increase. Maximum dry density is the highest when uniformity coefficient is approximately 300 in soil of which maximum diameter is 4.76mm. 3. Maximum dry density has a tendency to become large according as value of Cu Caincrease. Correlation between maximum dry density and $Log_{10}$(CuCa) shows straight line. 4. Maximum dry density increases according as n increase and reaches the peak when n equal 0.35 in condition that the index of talbot formula n is less than 0.35 in soil of which maximum diameter is 4.76mm. 5. Maximum dry density has a tendency to increase according as value of Cg $(Cg=\frac{P_{50}^2}{P_{10}{\times}{P_{200}}$) decrease.

• Journal of The Korean Astronomical Society
• /
• v.5 no.1
• /
• pp.7-14
• /
• 1972

We have investigated the structure of the general relativistic polytrope(G.R.P.) of n=5. The numerical solutions of the general relativistic Lane-Emden functions ${\upsilon}\;and\;{\theta}$ for the ratio of the central pressure to the central density ${\sigma}=0.1$, 0.3, 0.5 and 0.8333 are plotted graphically. We may summarize the results as follows: 1. As the invariant radius $\bar{\xi}$ increases, the numerical value of the mass parameter ${\upsilon}$ does not approach toward the assymptotic limit, as it does in the classical case $({\upsilon}{\sim}{\sqrt{3}})$, but it increases continuously with progressively smaller rate as compared with the classical case. 2. When $\bar{\xi}$ is less than ${\sim}5.5$, the value of the density function ${\theta}$ drops more rapidly than the classical one, whereas when $\bar{\xi}$ is greater than ${\sim}5.5$, ${\theta}$ becomes greater than the classical value. For the greater values of ${\sigma}$ these phenomena become significant. 3. From the above results it is expected that the equilibrium mass of the G.R.P. of n=5 must be larger than the classical masse $({\sqrt{3}})$ and the mass is more dispersed than the classical configuration (i.e. equilibrium with infinite radius).

• Geomechanics and Engineering
• /
• v.34 no.1
• /
• pp.29-41
• /
• 2023

The 3D geospatial modeling of geotechnical information can aid in understanding the geotechnical characteristic values of the continuous subsurface at construction sites. In this study, a geostatistical optimization model for the three-dimensional (3D) mapping of subsurface stratification and the SPT-N value based on a trial-and-error rule was developed and applied to a dam emergency spillway site in South Korea. Geospatial database development for a geotechnical investigation, reconstitution of the target grid volume, and detection of outliers in the borehole dataset were implemented prior to the 3D modeling. For the site-specific subsurface stratification of the engineering geo-layer, we developed an integration method for the borehole and geophysical survey datasets based on the geostatistical optimization procedure of ordinary kriging and sequential Gaussian simulation (SGS) by comparing their cross-validation-based prediction residuals. We also developed an optimization technique based on SGS for estimating the 3D geometry of the SPT-N value. This method involves quantitatively testing the reliability of SGS and selecting the realizations with a high estimation accuracy. Boring tests were performed for validation, and the proposed method yielded more accurate prediction results and reproduced the spatial distribution of geotechnical information more effectively than the conventional geostatistical approach.

• Fisheries and Aquatic Sciences
• /
• v.8 no.4
• /
• pp.201-206
• /
• 2005

Microalgae are widely used for mass culture of the rotifer Brachionus plicatilis in aquaculture. Since the nutritional value of the rotifer is closely related to its food, the nutritional value of its food should be known in detail. Chlorella ellipsoidea and Nannochloris oculata are re­presentative food organisms for rotifers that are easily cultured. Therefore, the nutritional values of these micro algae were examined for ultrasmall, small, and large rotifers and Artemia nauplii. Chlorella ellipsoidea contained seven times more total fatty acids than N. oculata. The three types of rotifer fed N. oculata contained more amino acids than those fed C. ellipsoidea. However, the total fatty acids of the rotifers fed each microalga species differed according to the type of rotifer. Newly hatched Artemia nauplii contained more protein and had a higher dry weight than those fed microalgae for 6 h. As with the rotifers, the Artemia nauplii fed N. oculata contained more protein and amino acids than those fed C. ellipsoidea, while the reverse was true for the total fatty acid content. Our results suggest that N. oculata is a good supply of protein, while C. ellipsoidea is a good source of lipids as food organisms for rotifers and Artemia nauplii in aquaculture.

• The Pure and Applied Mathematics
• /
• v.11 no.1
• /
• pp.97-102
• /
• 2004

In this paper we establish some recurrence relations satisfied by quotient moments of upper record values from the Pareto distribution. Let ｛$X_n,n\qeq1$｝be a sequence of independent and identically distributed random variables with a common continuous distribution function(cdf) F($chi$) and probability density function(pdf) f($chi$). Let $Y_n\;=\;mas{X_1,X_2,...,X_n}$ for $ngeq1$. We say $X_{j}$ is an upper record value of {$X_{n},n\geq1$}, if $Y_{j}$＞$Y_{j-1}$,j＞1. The indices at which the upper record values occur are given by the record times ${u( n)}n,\geq1$, where u(n) = min{j｜j ＞u(n-l), $X_{j}$＞$X_{u(n-1)}$,n\qeq2$ and u(l) = 1. Suppose $X{\epsilon}PAR(\frac{1}{\beta},\frac{1}{\beta}$ then E$(\frac{{X^\tau}}_{u(m)}}{{X^{s+1}}_{u(n)})\;=\;\frac{1}{s}E$ E$(\frac{{X^\tau}}_{u(m)}{{X^s}_{u(n-1)}})$ - $\frac{(1+\betas)}{s}E(\frac{{X^\tau}_{u(m)}}{{X^s}_{u(n)}}$ and E$(\frac{{X^{\tau+1}}_{u(m)}}{{X^s}_{u(n)}})$ = $\frac{1}{(r+1)\beta}$ [E$(\frac{{X^{\tau+1}}}_u(m)}{{X^s}_{u(n-1)}})$ - E$(\frac{{X^{\tau+1}}_u(m)}}{{X^s}_{u(n-1)}})$ - (r+1)E$(\frac{{X^\tau}_{u(m)}}{{X^s}_{u(n)}})$]

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.5 no.1
• /
• pp.11-21
• /
• 2006

This study tried to search the defferences between color designer's intentions of the exterior color design in elementary school design and the students' recognitions. I made a questionare for the elementary school students who are in the 3 schools which are located in the north Kyung-Gi Do. I got the some conclusions as follows. First, the elementary students have different recognitions of the exterior color of the school from coloer designers' intentions. Second, with fixing the Hue, changing the Value and Chroma, the students have more preferances than before. And they have more preferances in high value higher than N8, and they have more preferance lower than 4 in chroma. But in chroma, they have highest preferance in existing status which are low chromas. Therefore, when exterior color designing in elrmentary school design, designer must consider high value higher than N8, and low chroma lower than 4.

• Journal of Chest Surgery
• /
• v.54 no.3
• /
• pp.186-190
• /
• 2021

Background: Pre-lifting of the sternum marked a major turning point in pectus excavatum repair. The author developed the crane technique in 2002 and successfully applied it to more than 2,000 cases using sternal wire stitching. However, blind sternal suturing limited the use of the wire-stitch crane. We propose a novel screw for sternal lifting as a new tool for the crane technique. Methods: We developed a screw system strong enough to withstand the pressure needed for sternum lifting. The screw was designed to have a broader thread to hold the bony tissue securely. The screw's sustaining power was tested using the torsion, driving torque, and axial pull-out tests in a polyurethane block and ex-vivo porcine sternum. Results: The screws were easily driven into the sternum, and the head of the screw was connectable to the table-mounted retractor. In the torsion test, the 2° offset torsional yield was 4.53 N·m (reference value, 1 N·m). In the polyurethane block driving torque test, the maximum torque was 0.98 N·m (reference value, 0.70 N·m). The axial pull-out test was 446 N (reference value, 100 N). The maximum pull-out resistance in the ex-vivo porcine sternum model was 1,516 N. Conclusion: The screw crane was strong enough to sustain the chest wall weight to be lifted. Thus, the screws could effectively replace the sternal wire stitching in crane pre-lifting of the sternum. We expect that application of the screw-crane will be easy and that it will improve the safety and success rate of pectus repair surgery.