• Title/Summary/Keyword: the extension shape

Search Result 432, Processing Time 0.028 seconds

Clinical and Therapeutic Aspects of Squamous Cell Carcinoma of Oral Tongue (구강 설 편평 상피 세포암의 임상적, 치료적 고찰)

  • Ryu Samuel;Lee Chang Gul;Park In Kyu;Suh Chang Ok;Kim Gwi Eon;Loh John J.K.
    • Radiation Oncology Journal
    • /
    • v.5 no.2
    • /
    • pp.105-110
    • /
    • 1987
  • Fourty nine patients with squamous cell carcinoma of oral tongue were reviewed retrospectively for the evaluation of clinical manifestation and for the comparison between therapeutic modalites. The gross shape of the tumor was infiltrative in 22, ulcerative in 12, ad ulcer-oinfiltrative type in 10 patients. Direct extension of the tumor was most commonly to the floor of the mouth. The incidence of nodal metastasis generally increased with tumor stage. $55\%$ of the patients showed neck nodal metastasis at the time of diagnosis. Ipsilateral subdigastric node were most commonly involved, followed by submandibular nodes. The 5-year survival rate of patients treated with surgery and radiotherapy was $58.7\%$ in contrast to $21.6\%$ in radiation alone group. Overall 5-year survival rate was $31\%$ In radiation alone group, half of the patients in stage I, II were locally controlled. But the local control In stage III, IV was much inferior to early lesions. Especially, of 4 patients combined with implantation technique, 3 were completely controlled. 5-year survival rate of these implanted patients was $50\%,\;49.4\%$ of patients treated over 7,000cGy survived 5 years. This was significant in contrast to $6.4\%$ of the group treated below 7,000cGy. The most common sites of failures were primary sites. In early lesions primary radiotherapy with implantation would be an appropriate treatment in cancer of oral tongue, operation reserved for radiation failure. Operation and adjuvant radiotherapy is recommended in cases of advanced disease.

  • PDF

Follow-Up Survey Fire Truck Deterioration (소방자동차 노후화에 따른 고장 발생원인 추적조사 연구)

  • Lee, Jang-Won;Kim, Eui-Tae;Rie, Dong-Ho
    • Fire Science and Engineering
    • /
    • v.29 no.3
    • /
    • pp.59-64
    • /
    • 2015
  • This study analyzed results of the causes of failure in 1,022 fire trucks currently being used in South Korea (aerial ladder, aerial platform, pumper, and chemical fire trucks). The results show that 46% of aerial ladder trucks have defective in the elevator brake systems, 29% of aerial platform trucks have contamination in the hydraulic oil, 37% of pumpers have defective in the pneumatic cylinders of the air supply system, and 39% of chemical fire trucks have defective in the powder fire extinguishing systems. The principal reasons for malfunctions are deterioration of the apparatuses, and accumulated fatigue from repetitive use of certain components, such as pneumatic cylinders in the air supply system and wire rope jamming in rollers in the ladder apparatus. These manufacturing defects should be improved upon in the manufacturing process. As a result, the fire trucks, which are used for 5 years or more, need precise inspections in accordance with the Regulation on Fire Apparatus Maintenance. Fire apparatuses have a service life of 10 to 12 years or more. They need to be replaced or require life extension, and they should be kept in top shape with the best maintenance for public safety.

Leaf Spot of Kalanchoe (Kalanchoe blossfeldiana) Caused by Stemphylium lycopersici (Stemphylium lycopersici에 의한 칼란코에 점무늬병)

  • Kwon, Jin-Hyeuk;Jeong, Byoung-Ryong;Yun, Jae-Gill;Lee, Sang-Woo
    • Research in Plant Disease
    • /
    • v.13 no.2
    • /
    • pp.122-125
    • /
    • 2007
  • Leaf spot disease of Kalanchoe (Kalanchoe blossfeldiana) occurred at the farmer's vinly house in Gangseo-gu, Busan Metropolitan City, Korea, 2006. The diseased plants with typical symptom were collected and the casual agent were isolated. Its mycological characteristics and pathogenicity were examined. The results were as follows. The typical symptoms of the disease appeared as small brownish or dark brown spot on both sides of the leaves. The spots tended to develop from lower leaves. The spots gradually enlarged into conspicuous necrotic lesions 1-5 mm in diameter. Colonies of the causal fungus formed on potato dextrose agar were velvety, gray or grayish brown in color, Conidia were cylindrical or obclavate to oblong in shape, brown in color, $24{\sim}65\;{\times}\;12{\sim}23\;{\mu}m$ in size and had 1-4 transverse septa, The optimum temperature for growth of the fungus was about $25-30^{\circ}C$. Conidiophores were brown in color, $32{\sim}135\;{\times}\;4{\sim}8\;{\mu}m$ in size and had 1-7 transverse septa. The fungus was identified as Stemphylium lycopersici (Enjoji) Yamamoto based on its symptom and mycological characteristics. This is the first report of leaf spot of Kalanchoe caused by S. lycopersici in Korea.

Sooty Leaf Blight of Dendrobium sp. Caused by Pseudocercospora dendrobii (Pseudocercospora dendrobii에 의한 덴드로비움 검은잎마름병)

  • Kwon, Jin-Hyeuk;Park, Chang-Seuk
    • The Korean Journal of Mycology
    • /
    • v.30 no.2
    • /
    • pp.173-175
    • /
    • 2002
  • Sooty leaf blight was found on Dendrobium sp. in several farmers' fields located in Namji-eup, Changnyeong-gun, Gyeongnam province, Korea in 2001. Symptoms of the disease appeared on leaves. Sooty leaf spots were started with amphigenous, subeircular to irregular spots, with light grayish brown to black color with definite margin lines on the upper surface of leaves. Infected leaves became defoliated and whole plants eventually were died. The infection rates of the disease in the surveyed area reached up to 64.8%, in the early September. Conidiophores of the causal fungus were dark grayish brown in color, densely fasciculate, straight, curved to sinuous, branched, $5{\sim}10$ septate and $63{\sim}164{\times}3.2{\sim}4.9{\mu}m$ in size. Conidia were pale to olivaceous in color, obclavatecylindric, straight to slightly curved in shape, $1{\sim}5$ septate and $46{\sim}98{\times}3.2{\sim}3.9{\mu}m$ in size. The optimum temperature for mycelial growth of the fungus was $25^{\circ}C$. The fungus was identified as Pseudocercospora dendrobii on the basis of its mycological characteristics. This is the first report on sooty leaf light of Dendrobium sp. caused by Pseudocercospora dendrobii in Korea.

Studies on the Morphological and Physiological Characteristics of Pleurotus cystidiosus O.K.Miller, the Abalone Mushroom (전복느타리버섯(Pleurotus cystidiosus O.K.Miller)의 형태적 및 생리적 특성에 관한 연구)

  • Jang, Kab-Yeul;Jhune, Chang-Sung;Shin, Chul-Woo;Park, Jung-Sik;Cheong, Jong-Chun;Choi, Sun-Gyu;Sung, Jae-Mo
    • The Korean Journal of Mycology
    • /
    • v.31 no.3
    • /
    • pp.141-147
    • /
    • 2003
  • The pileus of Pleurotus cystidiosus was attached at the side and was spatular-shape. It grew to the size of $7.6{\sim}9.8\;cm$ with dark brown color. The length of stem was $1.4{\sim}2.9\;cm$. The individual weight of fruiting-body was 25.4 g in average. This study was conducted to Investigate the physiological characteristics and to develop the artificial cultivation technique of P. cystidiosus. To find out the optimum condition of mycelial growth of P. cystidiosus, physiological conditions such as media, temperature, pH carbon sources and nitrogen sources were investigated. Various cultural media were used for the cultivation of P. cystidiosus and compost dextrose agar was favorable for mycelial growth. The optimal growing temperature and pH were in range of 25 to $30^{\circ}C$, pH $7{\sim}9$, respectively. When different carbon sources were compared, glucose was found to be best. However nitrogen sources were different with each strains. When different C/N ratio were compared, 20:1 of C/N ratio was found to be best.

A Study on Protection Depending on Mesh Size of Expanded Metal for Slope Reinforcement (사면보강용 Expanded Metal 격자크기에 따른 인발 특성 연구)

  • Ji, Younghwan;Kim, Kihwan;Kim, Sungho;Hwang, Yeongcheol;Lee, Seungho
    • Journal of the Korean GEO-environmental Society
    • /
    • v.11 no.12
    • /
    • pp.47-56
    • /
    • 2010
  • The construction of new roads and the consistent extension of already-existing roads or the line-shape revision of those roads are increased with the governmental investment to SOC facilities currently. Accordingly, the road cut slopes are in the trend of rapidly increasing. As the road slope has increased, a lot of human and property damages has entailed consequently and in the local case, numerous studies have carried out aiming at minimizing this damages caused by the rockfall and landslide. In general, standard falling rock prevention facility has employed for most of the local road slope based on "Guide for Installation and Management of Road Safety Facilities" published by MLTM(the Ministry of Land, Transport, and Maritime Affairs) but profound doubt has raised as to whether this rockfall prevention facility would function properly enough to prevent rockfall efficiently without any damages in case of actual occurrence of rockfall. In addition, it is a reality that in most cases, such work is relied on overseas technology as a whole as the local technical level is low and in case of rockfall prevention net, it is judged that a study on rockfall prevention net that is able to endure more powerful rockfall energy is required as the problem including net bursting is taken place as a result of enough bearing force being failed to be demonstrated due to its partial weak point(not uniformly made). Under this background, in this study, three kinds of model depending on mesh size of expanded metal that is considered to have an adoptability as rockfall prevention net, as target are selected and characteristics depending on mesh size of expanded metal is intended to be researched through a pull-out test performance by using pull-out test equipment rockfall prevention net.

Evaluating Geomorphological Classification Systems to Predict the Occurrence of landslides in Mountainous Region (산사태 발생예측을 위한 지형분류기법의 비교평가)

  • Lee, Sooyoun;Jeong, Gwanyong;Park, Soo Jin
    • Journal of the Korean Geographical Society
    • /
    • v.50 no.5
    • /
    • pp.485-503
    • /
    • 2015
  • This study aims at evaluating geomorphological classification systems to predict the occurrence of landslides in mountainous region in Korea. Geomorphological classification systems used in this study are Catena, TPI, and Geomorphons. Study sites are Gapyeong-gun, Hoengseong-gun, Gimcheon-si, Yeoju-si/Yicheon-si in which landslide occurrence data were collected by local governments from 2001-2014. Catena method has objective classification standard to compare among regions objectively and understand the result intuitively. However, its procedure is complicated and hard to be automated for the general public to use it. Both TPI and Geomorphons have simple procedure and GIS-extension, therefore it has high accessibility. However, the results of both systems are highly dependent on the scale, and have low relevance to geomorphological formation process because focusing on shape of terrain. Three systems have low compatibility, therefore unified concept are required for broad use of landform classification. To assess the effectiveness of prediction on landslide by each geomorphological classification system, 50% of geomorphological classes with higher landslide occurrence are selected and the total landslide occurrence in selected classes are calculated and defined as 'predictive ability'. The ratio of terrain categorized by 'predictive ability' to whole region is defined as 'vulnerable area ratio'. An indicator to compare three systems which is predictive ability divided by vulnerable area ratio was developed to make a comprehensive judgment. As a result, Catena ranked the highest in suitability.

  • PDF

Early Autumn Maturing Pear Cultivar 'Sinhwa' with Fascinating Very Soft Flesh (부드러운 육질이 매력적인 중생종 배 '신화')

  • Kang, Sam-Seok;Kim, Yoon-Kyeong;Hwang, Hea Seong;Cho, Kwang-Sik;Shin, Il-Sheob;Won, Kyeong-Ho;Choi, Jang-Jeon;Kim, Ki-Hong;Jo, Ji Hyeong
    • Horticultural Science & Technology
    • /
    • v.31 no.4
    • /
    • pp.512-516
    • /
    • 2013
  • Pear cultivar 'Sinhwa' (Pyrus pyrifolia var. culta Nakai) was originated from a cross between 'Niitaka' and Whasan' with the aims of improving the fruit quality and the traits of cultivation and of early maturing more than 'Whasan' cultivar at Pear Research Station of National Institute of Horticultural & Herbal Science, Rural Development Administration in 1995. 'Sinhwa' was preliminarily selected in 2004 and named in 2009. The tree shows vigorous growth habit and semi-spread characters like 'Niitaka'. Furthermore, it has a sufficient and well upkeep of the flower bud, so it can be more easily cultivated in orchards. In the flower characteristics, flowering time of 'Sinhwa' is $11^{th}$ April like as maternal parent 'Niitaka'. Also 'Sinhwa' has short of pollen grains, so it is need above two pollinizer cultivars. 'Sinhwa' is highly resistant to black leaf spot (Alternaria kikuchiana) and relatively strong to pear scab (Venturia nashicola) in field condition. The optimum harvest time is around Sep. $15^{th}$ in Naju, which is ahead of 'Whasan' about 10 days in the harvest period. The fruit shape is oblate and fruit skin color is yellowish-brown during harvesting time. The average weight of fruit is 627 g, and the soluble solids content is $13.0^{\circ}Brix$. The flesh is very soft and juicy, and renders good eating quality. Shelf life is about 30 days under the room temperature condition.

Effect of Diniconazole on Growth and Flowering of Vinca rocea and Salvia splendis (Diniconazole 처리가 일일초와 샐비어의 생장 및 개화에 미치는 영향)

  • Choi, Sung-Hwan;Kang, Jum-Soon;Choi, Young-Whan;Lee, Yong-Jae;Park, Young-Hoon;Kim, Mi-Ra;Son, Beung-Gu;Kim, Hyeun-Kyeung;Kim, Hong-Yul;Oh, Wook;Sim, Hak-Bo;Lim, Ki-Byung;Kim, Jin-Ki
    • Journal of Life Science
    • /
    • v.21 no.7
    • /
    • pp.1004-1008
    • /
    • 2011
  • This study was conducted to investigate the effects of uniconazole (Sumiseven), an existing expensive growth retardant, and diniconazole (Binnari), used as a cheap germicide, on the growth and flowering of Vinca major and Salvia splendis for the possibility of substitution for expensive growth retardants. The growths of V. major and S. splendis were retarded by Binnari treatment. The effect of Binnari 100 mg/l treatment was higher than that of Sumiseven 5 mg/l treatment in both plants. The length of leaves was remarkably retarded by Binnari treatment, however, the width of leaves was only slightly retarded, giving the leaf a round shape. The number of days to flowering was increased by Binnari treatment in both in V. major and S. splendis. The number of days to flowering in V. major showed no significant difference compared to the control except by treatemtn with Binnari 400 mg/l. The number of florets of S. splendis increased with treatment with Binnari 100 and 200 mg/l.

Preparation of Coil-Embolic Material Using Syndiotactic Poly(vinyl alcohol) Gel Spun Fibers (교대배열 PVA 젤 섬유를 이용한 고분자 색전 코일 제조)

  • Seo, Young Ho;Oh, Tae Hwan;Han, Sung Soo;Joo, Sang Woo;Khil, Myeong Seob
    • Polymer(Korea)
    • /
    • v.37 no.4
    • /
    • pp.486-493
    • /
    • 2013
  • The structure, morphology, and physical properties of syndiotatic poly(vinyl alcohol) (s-PVA) gel spun fibers were investigated to prepare polymeric embolization coils. S-PVA was prepared by saponification of the poly(vinyl acetate)/poly(vinyl pivalate)(PVAc/PVPi) copolymer. The viscosity of s-PVA solutions showed shear thinning behavior and the solution formed a homogeneous phase. Based on shear viscosity change with concentration, the optimum dope concentration was selected as 13 wt%, after which s-PVA fibers were spun and the solvent was removed. The fibers were then drawn with a maximum draw ratio of 15. A polymeric embolization coil was made of the s-PVA gel-spun fibers. The fibers were wound densely onto rigid rod and then annealed at different annealing temperatures. The polymeric embolization coil annealed at $200^{\circ}C$ was similar to metallic coils and its shape was maintained well after extension. Overall, gel-spun PVA fibers performed well for the preparation of primary and secondary coils to replace metallic coils.