• Journal of information and communication convergence engineering
• /
• v.7 no.1
• /
• pp.19-23
• /
• 2009

In this paper, we propose a general idea about an RFID system which provides lighted weight algorithm. We discuss how RFID could be applied for this kind of system, especially, compact protocol. We evaluate a few protocols that have been suggested for use in passive RFID tagged systems. We can reduce security computation without losing security features by message integration and pre-computation in this paper. And the proposed protocol can be used in low-cost RFID systems that require a small computational load for both the back-end database and the tags.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.24 no.3
• /
• pp.316-324
• /
• 2021

Purpose: The use of soy-based infant formula has increased widely in infants with cow's milk allergy (CMA). This study aimed to provide evidence on the growth pattern of CMA infants fed with soy-based infant formula in an Indonesian setting. Methods: A multi-site, intervention study was conducted among full-term and normal birth weight CMA infants. Within six months, the subjects were provided with a soy-based infant formula. Weight, height, and head circumference were measured at baseline, weeks 4, 8, 12, 16, 20, and 24. Adverse events were recorded by scoring atopic dermatitis and symptom-based clinical scores. Results: Based on the World Health Organization growth chart, we found that most of subjects had normal nutritional status for weight-for-age, length-for-age, weight-for-length, and head-circumference-for-age. There were statistically significant differences between baseline and end-line for weight-for-age, length-for-age, weight-for-length, and head circumference-for-age nutritional status. No allergic symptoms or intolerance toward soy formula were observed at the end of the intervention period. Conclusion: These results show that infants fed with soy-based infant formula have a normal pattern of growth.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.05a
• /
• pp.67-68
• /
• 2001

무부자 쌍끌이 중층망은 유속에 관계없이 뜸줄이 거의 일직선으로 유지되고 뜸줄의 깊이 변화가 없으므로 부력은 작용하지 않지만 아래 끌줄의 길이를 조절함으로써 망고를 유지할 수 있다. 또한, 무부자 쌍끌이 중층망은 발줄의 침자 외에도 추(Front weight)와 날개끝 추(Wing-end weght)의 무게를 증가시키면, 아래쪽으로의 침강력이 작용하여 망고를 더 크게 할 수 있어 기존어구보다 전개성능을 더욱 향상시킬 수 있다. (중략)

• Journal of Nutrition and Health
• /
• v.39 no.5
• /
• pp.467-475
• /
• 2006

The necessity of adequate pregnancy weight gain for optimal pregnancy outcome has been recognized. However, the specific components of pregnancy weight gain that might be critical for fetal growth and development have not been elucidated clearly. The purpose of this study was to investigate the correlation of pregnancy weight gain and birth weight with serum leptin levels in women delivered newborns. The subjects were recruited from K university hospital. The subject's characteristic data (age $32.1\;{\pm}\;4.3\;y$, gestational age $39.5\;{\pm}\;1.1wk$, pre-pregnancy weight $58.0\;{\pm}\;8.6\;kg$, pregnancy weight gain $12.7\;{\pm}\;5.5\;kg$, newborn's birth weight $3.5\;{\pm}\;0.5\;kg$) were gathered. Maternal dietary assessment was carried out at the end of pregnancy. After delivery, blood samples were collected from 20 mother-newborn pairs. Serum levels of various lipids and leptin were analyzed. Maternal daily consumption of iron, zinc, folate were lower than the RDA of each nutrient and index of nutritional quality was less than 1 showing that the quality of maternal diet was low. The levels of serum leptin of mothers and infants were $10.2\;{\pm}\;6.7\;ng/ml$ and $1.7\;{\pm}\;0.6\;ng/ml$, respectively. The serum leptin concentrations of male infants $(1.9\;{\pm}\;0.7\;ng\;ml)$ were not different from that of females $(1.7{\pm}0.5\;ng/ml)$. A negative correlation was found between the maternal pre-pregnant BMI and weight gain during pregnancy (r = -0.54, p < 0.05). There was a positive correlation between the pregnancy weight gain and the newborn's birth weight (r=0.59, p < 0.01 There were also positive correlation between newborn's birth weight and newborn's serum leptin levels (r = 0.57, p < 0.01). No correlations were found between maternal serum leptin levels and that of newborn's. Efforts should be made to attain adequate diet and weight gain during the pregnancy to reduce the likelihood of low or over birth weight of newborns.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.10
• /
• pp.27-33
• /
• 2019

The aviation industry has grown beyond the simple processing and assembling of aircraft parts and now designs and exports finished aircraft. In this study, the vertical CNC milling rotational speed and feed rate were parameters to investigate the life of tools according to their shape: (flat, round, and ball end mill) in the rough cutting of titanium. These tools are widely used in aircraft manufacturing and assembly. The purpose of this study is to measure the cutting temperature generated during the cutting process and calculate the rate of tool wear. This will be accomplished by measuring the tool weight before and after cutting the specimen and to compare it with the results of previous studies. Our study showed that the maximum cutting temperature increased as cutting time, tool rotational speed, and feed rate increased. The highest cutting temperatures were recorded for the ball, round, and flat end mill, respectively. Tool wear for the ball, round, and flat end mill increased as the speed and feed rate increased. The flat end mill exhibited the highest rate of wear from a minimum of 0.62% to a maximum of 2.88%.

• Journal of the Korean Institute of Gas
• /
• v.19 no.1
• /
• pp.18-22
• /
• 2015

This paper presents the stress strength safety of LPG steel cylinder for various corner radiuses of upper round end plate and lower round end plate by using a finite element method. The FEM analyzed results indicate that the most influential elements is a corner radius of upper round end plate and lower round end plate rather than a thickness of LPG cylinder. But, the thickness of a steel cylinder is an important design element considering for a weight reduction of a cylinder. Thus, this paper recommends that the LPG steel cylinder thickness is 2.3~2.6mm and the corner radius of upper round end plate and lower round end plate is over 157mm as an optimum design for the maximum testing pressure of 3.04MPa.

• Journal of Power System Engineering
• /
• v.3 no.3
• /
• pp.70-75
• /
• 1999

This study is for the development of tie rod end, a parts of steering system, that would be changed with plastic material. The position of weld line is founded by the analysis of Mold Flow, computer software with FEM(Finite Element Method). Then new mold is designed by consideration with the locations of weld line. PA66(G/F 35%), PA6(G/F 45%), PET(G/F 45%) and PET(G/F 55%) are tested two types loading conditions for selecting suitable material, the requirement tensile load(more 19600N). PA6(G/F 45%) showed high mechanical properties in this study. And then, tensile strength was compared between conventional metal products and the injection molded products which were reinforced with 33%, 34%, 45%. 60% of glass fiber in matrix material. In the case of, the measured two types of tensile load values are 24500N (Method-1), 21560N (Method-2) and weight is decreased by 50% of conventional one.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1269-1271
• /
• 1996

This paper presents a visual servoing combined by evolutionary algorithms and neural network for a robotic manipulators to control position and orientation of the end-effector. Using the multi layer feedforward neural network that permits the connection of other layers, evolutionary programming(EP) that search the structure and weight of the neural network, and evolution strategies(ES) which training the weight of neuron, we optimized the net structure of control scheme. Using the four feature image information from CCD camera attached to end-effector of RV-M2 robot manipulator having 5 dof, we generate the control input to agree the target image, to realize the visual servoing. The validity and effectiveness of the proposed control scheme will be verified by computer simulations.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.767-772
• /
• 2003

The clay which transported into a pond under the high water content condition have no effective stress which develop from the starting point of sedimentation and self-weight consolidation. Since sedimentation and self-weight consolidation dependent on self-weight of solids is made progress over a long time, to accelerating it have many advantages in the economic view In this paper, sand spreading method which is one of sedimentation and self-weight consolidation acceleration method is studied through a series of experiments considering the mixing ratio of sand and clay. The test results show that the mixing ratio of clay and sand of 1:0.2 is the biggest rate of consolidation and the pouring at the end point of sedimentation considerably effects on consolidation rate.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.11
• /
• pp.1255-1260
• /
• 2001

The expansion of two different kinds of hydrodynamic size of polymethyl methacrylate (PMMA Mw: 1.56- 2.04 ${\times}$ 106 g/mol) has been measured by dynamic light scattering and viscometry above the Flory $\theta$ temperature of the variou s solvents such as n-butyl chloride, 3-heptanone, and 4-heptanone. The expansion of PMMA chains was analyzed in terms of universal temperature parameters and also compared with previous results of polystyrene (PS) system. First it was found that simple $\tau/{\tau}c$ parameter no longer had its universality for the expansion behavior of hydrodynamic size in the chemically different linear polymer chains. However after modifying ${\tau}/{\tau}c$ parameter into $(Mw/Ro2)3}2(\tau/\tauc)$, we observed a much better universality for both PMMA and PS systems. Here Mw, Ro, $\tau[=(T-{\theta}$)/${\theta}$]$, and ${\tau}c[=({\theta}-Tc)/Tc]$ are defined as the weight average molecular weight, the unperturbed end-to-end distance, the reduced temperature and the reduced critical temperature, respectively.