• 한국도로학회논문집
• /
• 제16권5호
• /
• pp.9-18
• /
• 2014

PURPOSES : The objective of this study is to evaluate the applicability of the pitch, which is produced during SDA petroleum upgrading process, as a pavement paving material. In order for the purpose, the physical and chemical properties of the pitch are analyzed, and then the various plasticizers are applied in the pitch. METHODS : Two types of pitch are selected from oil refinery companies, which are owned the SDA petroleum upgrading process. Also, two types of asphalt binders, PG 64-22 and PG 58-22, are employed to compare with the pitch because these two types of asphalt binders are currently used as paving materials. For the chemical property of the pitch, the composition of SARA (Saturate, Aromatic, Resin, Asphaltene), the elementary composition, and the functional group are analyzed. For the physical property of the pitch, the basic material property tests, such as penetration test, softening point test, flash point test, ductility test, and rotational viscometer test, are performed. Also, the DSR (Dynamic Shear Rheometer) test and the BBR (Bending Beam Rheometer) test are conducted using asphalt binder specimens obtained by both short term aging (Rolling Thin Film Oven, RTFO) and long term aging (Pressure Aging Vessel, PAV) processes. The rheological property of each pitch type is evaluated as a function of temperatures and loading cycles. PG 64-22 asphalt binder is used as a control material. RESULTS AND CONCLUSIONS : The Pitch may not be suitable for the pavement paving material without modifications, but the pitch can be used as alternatives of modified addictive or asphalt. If low molecular component, such as saturate and aromatic components, are added in the pitch based on the development of various plasticizers, it has a strong possibility for the pitch to be used as a alternative. However, in order to verify the performance property of the pitch, further research is needed.

• The Journal of Korean Physical Therapy
• /
• 제23권2호
• /
• pp.61-68
• /
• 2011

Purpose: The purpose of this study was to provide basic data for the effectiveness and the necessity of home visiting physical therapy through examining performance ability and functional changes in daily life activities by investigating the life of disabled persons living at home. Methods: After selecting 100 people with physical disabilities greater than level 3 and brain damage related disabilities living in Youngam-Gun, we conducted mobility tests according to a Modified Bathel Index (MBI), the Berg Balance Scale (BBS), and floor and bed movements? for Activities of Daily Living evaluation. We did this before the experiment and after doing home visiting physical therapy for 90 minutes at a time, once a week for 6 months Results: 1) Persons who live in a bed are higher than those who live in a floor. There was a significant difference between persons who live in a floor and those who live in a bed in the change in MBI and BBS scores after home visiting physical therapy. 2) Those with a musculoskeletal disorder had a significantly different change in MBI and BBS according to the type of disease and kind of disability. Those with neuropathy had a significantly different change in MBI. Those with physical disabilities showed a significant difference in MBI and BBS. Conclusion: A home visiting physical therapist can cause an improved performance ability and lead to the ability of disabled persons living at home to carry out activities of daily livingin a large part and the study for brain lesion disabilities except physical disabilities and stroke which occupy large proportion of disabled persons should be done.

• 보건행정학회지
• /
• 제18권3호
• /
• pp.41-57
• /
• 2008

To examine the gap between physician's perceived importance and performance of care and to identify factors associated with the gap. A self-administered questionnaire survey was conducted with 91 physicians working in a University hospital in Seoul. The respondents were asked about their perceived importance and actual performance of interpersonal care on a 5-point Likert-type scale, indicating a higher score as higher importance and performance. Interpersonal care was measured by questions modified from the Korean Standard Service Quality Index, which are grouped into 6 categories: basic services, extra services, reliability, courtesy, convenience, and tangibles. Multiple regression analysis was conducted to find out physician characteristics associated with the gap. All of the 6 interpersonal care categories showed lower performance than perceived importance. The respondents tended to have a worse performance than perceived importance as the number of patients per outpatient care session ($\beta$=-0.0204, p<0.05) and the need for customer satisfaction education increase ($\beta$=-0.2226, p<0.05). Female physicians ($\beta$=0.2336, p<0.05) and those with higher job satisfaction($\beta$=0.0096, p<0.05) showed a better performance than perception. Overall, it appears that lower quality of interpersonal care was delivered to patients than the desired level considered by the responding physicians. Based on the regression analysis results, it is suggested that reducing patient volume per session, fulfilling education need for customer satisfaction, and improving job satisfaction may contribute to reduce the gap between physician's perceived importance and performance of interpersonal care.

• Tribology and Lubricants
• /
• 제31권2호
• /
• pp.69-77
• /
• 2015

Recently, there have been reports of severe symptoms of wear in bearings due to foreign substances mixed in lubricants. Therefore, studying the effects of foreign substances (such as combustion products and metallic debris) on the wear characteristics of journal bearings and proposing appropriate management standards for lubricant cleanliness have become necessary. Studies on the effect of particle size and concentration of foreign substances on surface damage have actively progressed in the recent times. These studies indicate the possibility of foreign substances causing direct wear of bearing surfaces. However, experiments conducted until now involve only basic tests such as the Pin-on-Disk test instead of those involving real bearing systems. This study experimentally examines the damage to the surface of a journal bearing due to foreign substances (combustion products and alumina) mixed with the lubricant, as well as the effect of the type and size of particles on its wear characteristics. The study uses an experimental journal bearing similar to a real bearing system for conducting the lubrication test. Hydrodynamic Lubrication (HL) numerical analysis, experiment results, and film parameters are used for calculating the operating conditions required for achieving the desired film thickness, and the results of the analysis are modified for considering the surface roughness. The run-time of the experiment is 10 min including the stabilization process. The experiment results show that alumina particles larger than the minimum film thickness cause significant surface damage.

• 한방재활의학과학회지
• /
• 제20권4호
• /
• pp.105-130
• /
• 2010

Objectives : The purpose of this study was to assess the statistical methods errors used in the journal of Oriental Rehabilitation Medicine(JORM) and to identify the types of errors in statistical analysis. Methods : We reviewed quantitative articles that were published in the JORM from January 2005 through October 2009. Those were not used by statistical analysis such as literature studies, case study, review articles were not included in this analysis. A total of 296 articles was reviewed. We evaluated the adequacy and the validity of the statistical techniques with our checklist established be modified Lee's checklist, and three statistical evaluators assessed together to minimize bias. Results : Of the 222 articles, 213 were used in inferential and descriptive statistics. Of those 80% of articles adopting descriptive and inferential statistics were detected having statistical errors. One articles used 1.7 statistical method unit generally. Most frequently employed statistics were student t-test, one way ANOVA. pearson correlation analysis, Mann-whitney U test, paired t-test, and chi-square test in their order. However, most frequent statistics having errors were similar in order. The most common statistic errors were as follow: 1. absence of normality test, 2. misuse between paired test and unpaired test, 3. wrong choice of repeated measures analysis without consideration of time variables, 4, increase of Type I error by using inappropriate multiple test, 5. inappropriate application of discrete or categorical data instead of continuous data in correlation analysis, 6. poor consideration of basic consumption in chi-square test, 7. confusion between frequency comparison and average comparison, 8. mentioning the statistical technique without using it. Conclusions : We found various mistake or misuses in the applications of statistical methodologies in the articles published in the JORM. Careful consideration of statistical use and review from the specialist of statistics are warranted for improving the quality of JORM.

• 한국의류산업학회지
• /
• 제19권6호
• /
• pp.736-748
• /
• 2017

This study was carried out to offer basic data that can be used for clothing industry for active senior males emerging as a new consumer bracket in the rapid aging age. To this end, this study conducted a questionnaire survey on consumers' wearing condition targeting active senior males. As a result of the questionnaire survey targeting active senior males, the outdoor wear items that they had the most were windbreaker jackets, long pants, and they said the most important reason for their preferred brand was wearing sensation. The matters to consider in purchasing outdoor wear were also wearing sensation and size. Consequently, the active senior males regard wearing sensation as very important. The measurements that they felt uncomfortable by body part were the abdominal extension circumference, sleeve length and jacket length of a jacket, and the rise and lengths of pants. To design the outdoor wear patterns suitable for the active senior male's body type, the pattern measurements of these body parts need to be modified. From the fact-finding survey result on outdoor wear companies, their measurement indicating method was the same for jackets, but each brand used different methods for pants. Based on the results of this survey, outdoor wear needs to be developed to meet active senior needs.

• 대한토목학회논문집
• /
• 제30권6D호
• /
• pp.697-705
• /
• 2010

본 연구에서는 환경의식과 철도이용행동의 관련성 분석을 통해 환경의식이 철도이용 촉진에 미치는 시사점에 대해 고찰하고자 하였다. 본 연구의 위상은 2008년 대구광역권 철도이용실태조사의 환경의식과 철도이용행동에 관한 실증적 분석이라는데 있고, 저탄소 녹색성장의 정책을 제언하는 데 있다. 본 연구 결과, 이용교통수단별 4개 인자의 환경의식이 각각 다르다는 점을 통계적으로 증명하였다. 이것은 환경의식이 교통수단선택행동에 긍정적 또는 부정적인 영향을 미치고 있다. 이는 사회적 환경의식이 높을수록 철도이용을 선호한다는 점을 의미한다. 즉, 환경문제에 대한 자동차 이용을 둘러싼 사회적 딜레마를 해결하는 정책으로써 철도이용촉진도 생각할 수 있다. 또한 환경의식지표를 고려해 철도와 승용차와 철도와 버스에 대한 이항프로빗 모형으로부터는 사회적인 환경의식지표가 철도이용의향행동에 긍정적인 영향을, 이기적인 환경의식지표는 부정적 영향을 미치고 있음을 확인할 수 있었다. 이는 사회적인 환경의식이 높고 이기적인 환경의식이 낮을수록 승용차로부터 철도로의 수단 전환 가능성이 높다는 것을 의미한다. 이 결과에 근거하면 철도이용촉진은 철도서비스 개선뿐만 아니라 환경의식의 계도도 중요하다는 것을 확인할 수 있었다.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.119-129
• /
• 1986

The purpose of this study was to evaluate the marginal leakage of glass ionomer cement with different cavosurface margins. 192 class V cavities were prepared on freshly extracted non-carious teeth and glass ionomer cement were inserted according to the manufacturer's instructions. Cavity preparations for this investigation were performed in four groups. The experimental specimens were made by packing the glass ionomer cement (Fuji Ionomer Type II G-C Co. Japan) into the prepared 192 cavities of four groups with different modes: Group I. - The 48 cavities with $90^{\circ}$ butt-joint cavosurface preparation and restored with glass ionomer cement. Group II. - The 48 cavities with butt-joint preparation modified by $135^{\circ}$ beveling the cavosurface in the dentin and restored with glass ionomer cement. Group III. - The 48 cavities with butt-joint preparation modified by cutting a chamfer in the dentin and restored with glass ionomer cement. Group IV. - The same 48 cavities as group I, and overfilled with glass ionomer cement beyond the cavosurface angle. And four groups above described divided into three subgroups by means of conditioning the cavity walls: Control group. - Glass ionomer cement filled in the prepared 64 cavities after being cleaned with a stream of tap water. Phosphoric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% phosphoric acid. Citric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% citric acid. All 192 specimens were immersed in the 2.0% basic fuchsin solution and subjected to thermal stress at one-minute intervals ($4{\pm}2^{\circ}C$ to $60{\pm}2^{\circ}C$) for 70 minutes before exposure to the dye. The specimens were sectioned ecclesiologically through the center of the restorations for different periods of immersion time, 24 hours, 7 days, 14 days 30 days. The sections were examined under a stereoscopic microscope. The results were as follows: 1. The degree of marginal leakage in group II and III was greater than that in group I and IV. 2. The degree of marginal leakage in phosphoric acid treatment group was similar with that in control group. 3. The degree of marginal leakage in citric acid treatment group was less than that in control group. 4. In all groups, the degree of marginal leakage in phosphoric acid treatment group was greater than that in citric acid treatment group. 5. There is no statistical difference of the degree of marginal leakage according to the immersion time in the dye solution.

• 디지털콘텐츠학회 논문지
• /
• 제19권9호
• /
• pp.1641-1652
• /
• 2018

본 연구는 성별에 적합한 이모티콘을 개발하기 위해 간사이 공학의 방법을 이용하여 이모티콘을 제작하였다. 우선 여러 문헌을 통하여 도출된 디자인 가이드 라인에 따라 이모티콘 프로토타입을 개발하였다. 이후, 설문조사를 실시하고 요소 분석에 의한 분석결과를 기반으로 각기 성별에 따라 다르게 도출된 디자인 가이드라인을 프로토타입에 반영하여, 성별을 고려한 이모티콘을 개발하였다. 이렇게 개발된 총 3종류의 이모티콘에 대해서 감정표현도 대한 설문조사를 실시하였다. 일부 이모티콘에서는 연구자의 의도와 같게 성별에 적합한 이모티콘이 설계된 것으로 나타났으나, 다수의 이모티콘에 있어서는 성별과 제작된 이모티콘간의 일관성 있는 특징을 찾기 어려웠다. 각 이모티콘의 상세 분석결과 이러한 결과가 발생한 주요한 원인 중의 하나로 디자인 가이드 라인의 상세함이 부족했다고 판단되며, 이 연구 결과는 향후 남녀 사용자의 감정 표현에 적합한 캐릭터형 이모티콘의 개발 및 활용에 대한 기초자료로 활용될 수 있을 것으로 기대된다.

• Journal of Animal Science and Technology
• /
• 제64권3호
• /
• pp.481-499
• /
• 2022

This study aims to determine the effects of D-methionine (D-Met) isomer and the methionine precursor 2-hydroxy-4-methylthiobutanoic acid i (HMBi) supplementation on milk protein synthesis on immortalized bovine mammary epithelial cell (MAC-T). MAC-T cells were seeded using 10-cm dishes and cultured in Dulbecco's modified Eagle's medium/F12 (DMEM/F12) basic medium. The basic medium of DMEM/F12 was replaced with the lactogenic DMEM/ F12 differentiation medium when 90% of MAC-T cells reached confluency. The best dosage at 0.6 mM of D-Met and HMBi and incubation time at 72 h were used uniformly for all treatments. Each treatment was replicated six times wherein treatments were randomly assigned in a 6-well plate. Cell, medium, and total protein were determined using a bicinchoninic acid protein assay kit. Genes, proteomics and metabolomics analyses were also done to determine the mechanism of the milk protein synthesis pathway. Data were analyzed by two-way analysis of variance (ANOVA) with supplement type and plate as fixed effects. The least significant difference test was used to evaluate the differences among treatments. The HMBi treatment group had the highest beta-casein and S6 kinase beta-1 (S6K1) mRNA gene expression levels. HMBi and D-Met treatments have higher gene expressions compared to the control group. In terms of medium protein content, HMBi had a higher medium protein quantity than the control although not significantly different from the D-Met group. HMBi supplementation stimulated the production of eukaryotic translation initiation factor 3 subunit protein essential for protein translation initiation resulting in higher medium protein synthesis in the HMBi group than in the control group. The protein pathway analysis results showed that the D-Met group stimulated fructose-galactose metabolism, glycolysis pathway, phosphoinositide 3 kinase, and pyruvate metabolism. The HMBi group stimulated the pentose phosphate and glycolysis pathways. Metabolite analysis revealed that the D-Met treatment group increased seven metabolites and decreased uridine monophosphate (UMP) production. HMBi supplementation increased the production of three metabolites and decreased UMP and N-acetyl-L-glutamate production. Taken together, D-Met and HMBi supplementation are effective in stimulating milk protein synthesis in MAC-T cells by genes, proteins, and metabolites stimulation linked to milk protein synthesis.