• 대한수학회보
• /
• 제54권2호
• /
• pp.383-389
• /
• 2017

This paper devotes to the study of a diffusive model for unstirred membrane reactors with maintenance energy subject to a homogeneous Neumann boundary condition. It shows that the unique constant steady state is globally asymptotically stable when it exists. This result further implies the non-existence of the non-uniform steady state solution.

• 충청수학회지
• /
• 제35권4호
• /
• pp.307-313
• /
• 2022

In this paper, we will consider the periodic stationary Stokes equations on Rⁿ. For the cube of the period, we set Ω = ∏ⁿ_i=1(0, L_i). And we will study the stability of the solutions on various functional spaces, for the Stokes equations on Rⁿ.

• 지질공학
• /
• 제21권1호
• /
• pp.57-64
• /
• 2011

화강암과 안산암질 암맥이 공존하고 있는 붕괴사변을 대상으로 지질에 의한 전단강도의 차이를 반영한 3차원 사면안정해석을 수행하였다. 지질이 서로 다른 두 종류의 파괴면에 대한 전단강도를 파악하기 위하여 흙-암 경계면 직접전단시험을 수행하였고, 또한 상부 풍화토층에 대한 실내토질시험을 실시하였다. 시험결과 풍화토층에 비하여 흙-암 경계면의 전단강도가 낮게 나타났다. 사면내 지질분포의 차이가 안정성해석 결과에 영향을 주는 것을 알아보기 위하여 한계평형법을 이용한 2차원사면안정성 해석을 대표단면에서 실시하였으며, 사면내 분포지질에 따라 입력치를 다르게 할 수 있는 3차원사면안정성해석을 실시하여 2차원안정성해석과 그 결과를 비교하였다. 해석결과에 의하면 안전율이 건기시 0.92와 포화시 0.32로 모두 불안정하게 나타난 2차원해석결과와는 달리 3차원해석결과에서는 건기시에 안전율이 1.26, 포화시에 0.55로 나타났다. 이러한 결과는 사면내 지질분포를 고려할 경우 안정성 해석의 결과가 달라질 수 있음을 보여주고 있으며, 우기 직후 붕괴가 일어났던 점을 고려하면 3차원해석결과가 보다 현실적인 것으로 판단된다.

• 터널과지하공간
• /
• 제19권6호
• /
• pp.498-506
• /
• 2009

복공식 압축공기 저장 터널의 라이닝은 고압의 공기압을 견뎌야 하므로 일반 도로터널 라이닝의 경우와는 다른 접근법에 의해 안정성 해석이 수행될 필요가 있다. 이에 따라 이 연구에서는 원통형 실린더의 탄성해 및 탄소성 해를 기반으로 하여 복공식 압축공기 저장터널에 설치되는 콘크리트 라이닝의 안정성 해석법이 제안되었다. 탄성해석의 경우 라이닝 내측 경계면의 항복개시조건을 라이닝 파괴기준으로 설정하였다. Mohr-Coulomb 항복기준을 적용한 탄소성 해석의 경우 최대 허용 항복 깊이까지 항복영역이 확대되는 조건을 파괴기준으로 설정하였다. 제안된 방법을 이용한 안정성해석 결과 라이닝의 내측 공기압과 배면하중의 상대적 크기가 라이닝의 안정성에 큰 영향을 미치는 것으로 나타났다. 상대적으로 추정이 힘든 배면하중의 정확한 예측이 라이닝 안정성 평가에서 매우 중요한 것으로 나타났다. 이에 따라 배면하중의 크기에 큰 영향을 주는 라이닝 설치시점 선택의 중요성이 강조되었다.

• 한국전산구조공학회논문집
• /
• 제34권2호
• /
• pp.113-120
• /
• 2021

무한 매질에서의 파전파 현상은 공학과 자연과학의 여러 분야에서 다양한 물리적 현상을 서술하는데 활용되고 있고, 이 문제에 대한 해를 얻기 위하여 해석적 방법 또는 수치적 방법이 개발되어 사용되고 있다. 이 문제에 대한 정확한 해를 얻기 위해서는 무한 영역으로의 에너지 방사를 정확히 고려해야 하고, 이를 위해 다양한 수치적 또는 역학적 모형 또는 경계조건이 개발되었다. 이 연구에서는 층상 waveguide에서의 scalar wave 또는 SH파 전파 문제에 적용할 수 있는 새로운 경계조건을 제안하고자 한다. 이를 위해 waveguide의 수직방향으로 유한요소 이산화를 적용하여 얻은 SH파의 지배방정식을 변형하여 waveguide의 무한 영역의 영향을 나타내는 경계조건을 유도한다. 층상 waveguide에서의 SH파에 대한 고유모드의 직교성을 이용하여, 새로운 경계조건은 기존의 root-finding absorbing boundary condition와 동등함을 보이고, 이로부터 새로운 경계조건의 차수가 증가할수록 정확성이 증가하고, 또한 이산화된 수준에서도 안정함을 유도할 수 있다. 제안된 경계조건을 층상 waveguide에서의 파전파 문제에 적용하여 그 정확성과 안정성을 검증한다.

• 호남수학학술지
• /
• 제41권2호
• /
• pp.403-420
• /
• 2019

The Helmholtz equation represents acoustic or electromagnetic scattering phenomena. The Method of Lines are known to have many advantages in simulation of forward and inverse scattering problems due to the usage of angle rays and Bessel functions. However, the method does not account for the jump phenomena on obstacle boundary and the approximation includes many high order Bessel functions. The high order Bessel functions have extreme blow-up or die-out features in resonance region obstacle boundary. Therefore, in particular, when we consider shape reconstruction problems, the method is suffered from severe instabilities due to the logical confliction and the severe singularities of high order Bessel functions. In this paper, two approximation formulas for the Helmholtz equation are introduced. The formulas are new and powerful. The derivation is based on Method of Lines, Huygen's principle, boundary jump relations, Addition Formula, and the orthogonality of the trigonometric functions. The formulas reduce the approximation dimension significantly so that only lower order Bessel functions are required. They overcome the severe instability near the obstacle boundary and reduce the computational time significantly. The convergence is exponential. The formulas adopt the scattering jump phenomena on the boundary, and separate the boundary information from the measured scattered fields. Thus, the sensitivities of the scattered fields caused by the boundary changes can be analyzed easily. Several numerical experiments are performed. The results show the superiority of the proposed formulas in accuracy, efficiency, and stability.

• Geomechanics and Engineering
• /
• 제33권1호
• /
• pp.101-112
• /
• 2023

When a submerged floating tunnel is connected to the ground, there is a risk of stress concentration at the shore connection owing to the displacement imbalance caused by low confinement pressures in water and high confinement pressures in the ground. Here, the effects of the boundary condition and stiffness of the joints installed at the shore connection on the behaviors of a submerged floating tunnel and its shore connection were analyzed using a numerical method. The analysis results obtained with fixed and ground boundaries were similar due to the high stiffness of the ground boundary. However, the stability of the shore connection was found to be improved with the ground boundary as a small displacement was allowed at the boundary. The effect of the joint stiffness was evaluated by investigating the dynamic behavior of the submerged floating tunnel, the magnitude of the load acting on the bored tunnel, and the stress distribution at the shore connection. A lower joint stiffness was found to correspond to more effective relief of the stress concentration at the shore connection. However, it was confirmed that joints with low stiffness also increase the submerged floating tunnel displacement and decrease the frequency of the dynamic behavior, causing a risk of increased resonance when wave loads with low frequency are applied. Therefore, it is necessary to derive the optimal joint stiffness that can achieve both stress concentration relief and resonance prevention during the design of shore connections to secure their dynamic stability.

• Structural Engineering and Mechanics
• /
• 제35권2호
• /
• pp.141-173
• /
• 2010

In this paper a boundary element method is developed for the general flexural-torsional buckling analysis of Timoshenko beams of arbitrarily shaped cross section. The beam is subjected to a compressive centrally applied concentrated axial load together with arbitrarily axial, transverse and torsional distributed loading, while its edges are restrained by the most general linear boundary conditions. The resulting boundary value problem, described by three coupled ordinary differential equations, is solved employing a boundary integral equation approach. All basic equations are formulated with respect to the principal shear axes coordinate system, which does not coincide with the principal bending one in a nonsymmetric cross section. To account for shear deformations, the concept of shear deformation coefficients is used. Six coupled boundary value problems are formulated with respect to the transverse displacements, to the angle of twist, to the primary warping function and to two stress functions and solved using the Analog Equation Method, a BEM based method. Several beams are analysed to illustrate the method and demonstrate its efficiency and wherever possible its accuracy. The range of applicability of the thin-walled theory and the significant influence of the boundary conditions and the shear deformation effect on the buckling load are investigated through examples with great practical interest.

• 디지털산업정보학회논문지
• /
• 제11권2호
• /
• pp.1-10
• /
• 2015

As programs get more complicated and they are developed by various hands, the possibility that there are program bugs in the code has been increasing. And developers usually run unit tests to find these problems in the code. Besides, the developers are at the pain of getting stability of the code when they have to modify a code very often for clients requirements. In the methodlogy of TDD(Test Driven Development), developers write a unit test code first, and then write a program code for passing the unit test. The unit test must include the boundary condition test the reason why the possibility of occurring the bugs is very high. When failed to pass the test because of the value of a function is incorrect, not existed, out of the range or not matched etc, the program code will return the error code or occur the exception. In the document, the system is designed and implemented in order to insert the generated code automatically or suggest it to the developer, when the boundary condition test is failed. In conclusion, it is possible that the developer will get the code stability by searching the code and checking the code to be omitted automatically through this system.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1268-1277
• /
• 2017

Three-phase pulse width modulation (PWM) rectifiers are usually designed under the assumption of ideal ac power supply and input inductance. However, non-ideal circuit parameters may lead to a voltage collapse of PWM rectifiers. This paper investigates the mechanism of voltage collapse in three-phase PWM rectifiers. An analytical stability boundary expression is derived by analyzing the equilibrium point of the averaging state space model, which can not only accurately locate the voltage collapse boundary in the circuit parameter domain, but also reveal the essential characteristic of the voltage collapse. Results are obtained and compared with those of the trial-error method and the Jacobian method. Based on the analysis results, the system parameters can be divided into two categories. One of these categories affects the critical point, and other affects only the instability process. Furthermore, an effective control strategy is proposed to prevent a vulnerable system from being driven into the instability region. The analysis results are verified by the experiments.